In-tube condensation of mixture of R134a and ester oil: empirical correlations

This paper presents a comparative study of the condensation heat transfer coefficients in a smooth tube when operating with pure refrigerant R134a and its mixture with lubricant Castrol “icematic sw”. The lubricant is synthetic polyol ester based oil commonly used in lubricating the compressors. Two concentrations of R134a-oil mixtures of 2% and 5% oil (by mass) were analysed for a range of saturation temperatures of refrigerant R134a between 35 °C and 45 °C. The mass flow rate of the refrigerant and the mixtures was carefully maintained at 1 g/s, with a vapour quality varying between 1.0 and 0. The effects of vapour quality, flow rate, saturation temperature and temperature difference between saturation and tube wall on the heat transfer coefficient are investigated by analysing the experimental data. The experimental results were then compared with predictions from earlier models [Int J Heat Mass Transfer (1979), 185; 6th Int Heat Transfer Congress 3 (1974) 309; Int J Refrig 18 (1995) 524; Trans ASME 120 (1998) 193]. Finally two new empirical models were developed to predict the two-phase condensation heat transfer coefficient for pure refrigerant R134a and a mixture of refrigerant R134a with Castrol “icematic sw”.     

Modeling of Diffusion in Capillary Porous Materials During the Drying Process

This paper presents a model of heterogenous diffusion in capillary porous materials during the process of drying. The governing heat and mass transfer equations have been established using the liquid as well as vapor flow. Two models have been presented. Model 1 does not consider the heat conduction while the model 2 has been established by considering the conduction. The developed models and the numerical solutions of the resulting differential equations can take into account the moisture and temperature dependent thermophysical properties of the product. All equations have been established in spherical coordinates but the programme written for the purpose of calculations can be used for other geometries also. Numerical calculations have been performed for gas concrete and tiles using model 1, while model 2 has been used for gas concrete only because of the lack of data for thermophysical properties of the tile. For gas concrete it was seen that conduction has only marginal effect on the drying process and the numerical predictions of the drying process were reasonably accurate.     

Modeling and optimization of fringe capacitance of nanoscale DGMOS devices

We analyze the impact of gate electrode thickness and gate underlap on the fringe capacitance of nanoscale double-gate MOS (DGMOS) transistors. We propose an analytical fringe capacitance model considering gate underlap and finite source/drain length. A comparison with the simulation results show that the model can accurately estimate the fringe capacitance of the device. We show that an optimum gate underlap can significantly reduce the fringe capacitance resulting in higher performance and lower power consumption. Also, the effects of process variation in gate underlap devices are discussed. Simulation results on a three-stage ring oscillator show that with optimum gate underlap 32% improvement in delay can be achieved.     

Three-phase self-excited induction generators: an overview

Induction generators are increasingly being used in nonconventional energy systems such as wind, micro/mini hydro, etc. The advantages of using an induction generator instead of a synchronous generator are well known. Some of them are reduced unit cost and size, ruggedness, brushless (in squirrel cage construction), absence of separate dc source, ease of maintenance, self-protection against severe overloads and short circuits, etc. In isolated systems, squirrel cage induction generators with capacitor excitation, known as self-excited induction generators (SEIGs), are very popular. This paper presents an exhaustive survey of the literature over the past 25 years discussing the process of self-excitation and voltage buildup, modeling, steady-state, and transient analysis, reactive power control methods, and parallel operation of SEIG.     

Comparison of the periodic solution method with TRNSYS and SUNCODE for thermal building simulation

Based on periodic solutions of the governing heat conduction equations in a single zone building, computer software ADMIT has been developed for thermal simulation of buildings. Standard computer software, namely TRNSYS and SUNCODE, have also been used to simulate the same building under similar conditions. Simulations have been performed for three different climatic zones in India for light and heavy constructions under conditions of glazed/unglazed areas and ventilation rates. The results are presented in terms of the hourly variation of the room temperature. For insulated heavy construction, the results of different models are significantly different. This difference is due to the use of different approaches to solve the heat conduction equations. SUNCODE depends on the RC network approach and underestimates the heat losses. TRNSYS uses the transfer function approach, which is sensitive to the initially assumed value of the room temperature. ADMIT represents a quasi-steady-state periodic variation and is not suitable for transient variations. For insulated light buildings, the heat transfer mechanisms used in the mathematical models are not the governing factors. The models also differ in treating the penetration of solar radiation through a glazed window and the subsequent heat-transfer mechanism. For a south window and air changes in an insulated building, the results obtained by SUNCODE and ADMIT are in good agreement, but the results obtained by TRNSYS are considerably different. The reason for this needs detailed analysis.     

Neural networks for contract bridge bidding

The objective of this study is to explore the possibility of capturing the reasoning process used in bidding a hand in a bridge game by an artificial neural network. We show that a multilayer feedforward neural network can be trained to learn to make an opening bid with a new hand. The game of bridge, like many other games used in artificial intelligence, can easily be represented in a machine. But, unlike most games used in artificial intelligence, bridge uses subtle reasoning over and above the agreed conventional system, to make a bid from the pattern of a given hand. Although it is difficult for a player to spell out the precise reasoning process he uses, we find that a neural network can indeed capture it. We demonstrate the results for the case of one-level opening bids, and discuss the need for a hierarchical architecture to deal with bids at all levels.     

Reaction of zirconium fluoride glass with water: kinetics of dissolution

When liquid water contacts a zirconium-barium-lanthanum fluoride glass, at least three different processes occur. Barium and zirconium fluoride dissolve into the water, water penetrates into the glass, and zirconium fluoride crystals grow on the glass surface, in static solution. The rate of dissolution, as measured by solution analysis, is possibly controlled by diffusion in the solid surface; surface blockage and surface reactions are other possible kinetic steps involved. Diffusion in solution is not the controlling mechanism. Hydrogen profiles in the glass surface suggest that the penetration rate of water into the glass is controlled by diffusion and a surface reaction.     

下一代SONET/SDH对网络部署的冲击

面对电信业的低迷,运营商和设备制造商都捏紧了钱袋,想方设法少花钱多办事。这就意味着,必须改进现有传输网(见图1),使话音和数据传输效率更高。从网络部署的角度来看,运营商需要:用一些有效的方法,将多协议数据转换到SONET/SDH信道上;用一种灵活的带宽适应机制,使SONET/SDH信道大小与在其中传输的数据的需求相一致;用一种机制,灵活并以理想的动态方式改变整个SONET/SDH网络的信道带宽。这就要求集成电路供应商提供有助于在SONET/SDH上有效传输数据的芯片。虽然现在有多种SONET/SDH信息包(PoS)产品,但是它们的转换效率都太…     

Sodium silicate as a coke inhibitor during naphtha pyrolysis

Rates of coke formation during steam pyrolysis of naphtha have been investigated in a jet-stirred reactor both for sodium silicate coated and uncoated Inconel 600 surfaces in the temperature range of 1078–1108 K. Coke formation rates were significantly reduced on sodium silicate coated plates due to the passivation of the metal surface. However, the coking rates gradually increased with successive decokings of the coated surface.