Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

A novel compact circuit for 4-PAM energy-efficient high speed interconnect data transmission and reception

Transmission of signals, whether on-chip or off-chip, places severe constraints on timing and extracts a large price in energy. New silicon device technologies, such as back-plane CMOS, provide a programmable and adaptable threshold voltage as an additional tool that can be used for low power design. We show that one particularly desirable use of this freedom is energy-efficient high-speed transmission across long interconnects using multi-valued encoding. Our multi-valued CMOS circuits take advantage of the threshold voltage control of the transistors, by using the signal-voltage-to-threshold-voltage span, in order to make area-efficient implementations of 4-PAM (pulse amplitude modulation) transceivers operating at high speed. In a comparison of a variety of published technologies, for signal transmission with interconnects of 10-15 mm length, we show up to 50% improvement in energy for on-chip signal transmission over binary encoding together with higher limits for operating speeds without a penalty in circuit noise margin.     

Delayed neurological symptoms from the spontaneous migration of a bullet in the lumbosacral spinal canal. Case report

In a patient wounded by a gunshot in the abdomen, the bullet was radiologically located intradurally at S1 level. Although she had no neurological deficit at admission, she developed pain and motor weakness a few days later. At operation the bullet was found at L4 level and its removal resulted in complete neurological recovery.     

Chemical,thermal, and mechanical properties and ultraviolet transmittance of novel nano-hydroxyapatite/polyethylene terephthalate milk bottles

Polyethylene terephthalate (PET)/nano-hydroxyapatite (nHAp) composite granules were obtained using twin-screw extruder. Preforms were prepared by injection molding and then PET/nHAp bottles were produced by blow molding. For PET bottles with nHAp, the migration amounts of carboxylic acid (COOH), acetaldehyde (AA), diethylene glycol (DEG), and isophthalic acid (IPA); glass transition temperature (T_g); melting temperature (T_m); and the maximum crystallization temperature (T_cry) were measured. The load-carrying capacity, burst strength, stress cracking, and regional material distribution tests were carried out on the bottles. X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and ultraviolet transmittance analyses were conducted to explain the changes in mechanical, chemical, physical properties, and light transmission of bottles. It was found out that the COOH amount increased and the AA content decreased with increasing nHAp amount. On the other hand, no change was observed in the amounts of DEG and IPA. Although the mechanical properties such as load-carrying capacity and burst strength of the bottles have improved, it has been determined that the standard environmental stress crack resistance test procedure cannot be applied to such a composite. Experimental findings indicate that nHAp disrupts the chemical structure of PET and it isolates harmful chemicals such as AA by forming intermolecular bonds. Moreover, with the addition of up to 0.8% nHAp, PET bottles block the light transmission approximately 80% within 400–700 nm wave length zone. The study demonstrates that the PET/nHAp composite bottles can be used in the food industry, particularly in the packaging of milk and milk products which are vulnerable to light exposure.     

Comparative study in chemistry of microbially and electrochemically induced pitting of 316L stainless steel

Ennoblement of stainless steel (SS) by microbially deposited manganese oxides can lead to pitting corrosion at low chloride concentrations, causing unexpected material failures. We exposed 316L SS to manganese oxidizing bacteria Leptothrix discophora under well-defined laboratory conditions, and then placed the ennobled coupons in a 0.5 M sodium chloride solution until pitting developed. Using time-of-flight secondary ion mass spectroscopy we demonstrated that the pits and their immediate vicinity associated with microbial influenced corrosion had different chemical signatures than those associated with electrochemically induced pitting, suggesting a possibility that the microorganisms were directly involved in pit initiation. Based on the differences in the chemical signatures we were able to distinguish the microbially induced pits from those induced by anodic polarization.     

Signal‐to‐noise ratios for measuring saliency of features extracted by eigenvector methods from ophthalmic arterial Doppler signals

Abstract: Features are used to represent patterns with minimal loss of important information. The feature vector, which is composed of the set of all features used to describe a pattern, is a reduced‐dimensional representation of that pattern. Medical diagnostic accuracies can be improved when the pattern is simplified through representation by important features. By identifying a set of salient features, the noise in a classification model can be reduced, resulting in more accurate classification. In this study, a signal‐to‐noise ratio saliency measure was employed to determine the saliency of input features of recurrent neural networks (RNNs) used in classification of ophthalmic arterial Doppler signals. Eigenvector methods were used to extract features representing the ophthalmic arterial Doppler signals. The RNNs used in the ophthalmic arterial Doppler signal classification were trained for the signal‐to‐noise ratio screening method. The application results of the signal‐to‐noise ratio screening method to the ophthalmic arterial Doppler signals demonstrated that classification accuracies of RNNs with salient input features are higher than those of RNNs with salient and non‐salient input features.     

Feature extraction by autoregressive spectral analysis using maximum likelihood estimation: internal carotid arterial Doppler signals

Abstract: In this study, Doppler signals recorded from the internal carotid artery (ICA) of 97 subjects were processed by personal computer using classical and model-based methods. Fast Fourier transform (classical method) and autoregressive (model-based method) methods were selected for processing the ICA Doppler signals. The parameters in the autoregressive method were found by using maximum likelihood estimation. The Doppler power spectra of the ICA Doppler signals were obtained by using these spectral analysis techniques. The variations in the shape of the Doppler spectra as a function of time were presented in the form of sonograms in order to obtain medical information. These Doppler spectra and sonograms were then used to compare the applied methods in terms of their frequency resolution and the effects in determination of stenosis and occlusion in the ICA. Reliable information on haemodynamic alterations in the ICA can be obtained by evaluation of these sonograms.     

Detection of COVID-19 and its pulmonary stage using Bayesian hyperparameter optimization and deep feature selection methods

Since the first case of COVID-19 was reported in December 2019, many studies have been carried out on artificial intelligence for the rapid diagnosis of the disease to support health services. Therefore, in this study, we present a powerful approach to detect COVID-19 and COVID-19 findings from computed tomography images using pre-trained models using two different datasets. COVID-19, influenza A (H1N1) pneumonia, bacterial pneumonia and healthy lung image classes were used in the first dataset. Consolidation, crazy-paving pattern, ground-glass opacity, ground-glass opacity and consolidation, ground-glass opacity and nodule classes were used in the second dataset. The study consists of four steps. In the first two steps, distinctive features were extracted from the final layers of the pre-trained ShuffleNet, GoogLeNet and MobileNetV2 models trained with the datasets. In the next steps, the most relevant features were selected from the models using the Sine–Cosine optimization algorithm. Then, the hyperparameters of the Support Vector Machines were optimized with the Bayesian optimization algorithm and used to reclassify the feature subset that achieved the highest accuracy in the third step. The overall accuracy obtained for the first and second datasets is 99.46% and 99.82%, respectively. Finally, the performance of the results visualized with Occlusion Sensitivity Maps was compared with Gradient-weighted class activation mapping. The approach proposed in this paper outperformed other methods in detecting COVID-19 from multiclass viral pneumonia. Moreover, detecting the stages of COVID-19 in the lungs was an innovative and successful approach.