Anaerobic co-digestion of food waste and FOG with sewage sludge – realising its potential in Ireland

The severe environmental pollution in many countries is caused by indiscriminate discharge of large quantities of food waste (FW), fat oil and grease (FOG) and sewage sludge (SS) to the environment. There are many possible treatment routes, but anaerobic digestion (AD) is now well accepted for treating several kinds of organic wastes. But AD of FW alone presents some operational challenges because of substrates and variability. Anaerobic co-digestion of two or more substrates is better than single substrate digestion. This can use a plant’s unused capacity, in line with the trend to renewable energy. Co-digestion technology, although well established in many European countries, is still in its infancy in Ireland. There are problems with different regulatory arrangements. They should be resolved. The paper reviews anaerobic co-digestion technology is reviewed, with special focus on possible application in Ireland.     

浅谈越南三岛国家公园森林资源的影响研究

越南太原省大慈县文安乡位于三岛国家公园管理处,社区居民生活困难,收入低,所以目前森林资源侵害状况依然存在。其中,25-50岁的群人对森林资源的影响最大,50岁以上和16岁以下的群人对森林资源的影响较小。人们对森林资源的影响是:伐木,狩猎动物,收集柴火,收集蔬菜,收集竹笋、药用植物。统计结果表明,天然林中具有18种树木经常被开发利用,常用木柴12种,药用29种,食用17种。7种动物经常被猎食。这些影响使得森林结构相当大改变,生物多样性减少,森林结构破坏。造成这种情况的主要原因是人们意识不高,缺乏工作机会,缺乏耕种土地,农业生产没有满足用户的需求。因此,必要有有关部门的协调在违法森林法的处理,为人民改善物质和精神生活,教育宣传和提高执法的认识     

Adaptive space-time reduced-length MMSE receiver for interferencesuppression in DS/CDMA

The authors present an adaptive space-time reduced-length minimum mean-squared error (MMSE) receiver to suppress co-channel interference in the near-far environment for an asynchronous direct-sequence code-division multiple-access (DS/CDMA) system. Simulation results show that better bit-error rate and faster and more stable convergence are achieved over the existing full- and reduced-length MMSE receivers     

Ovarian aging and hormone replacement therapy. Hormonal levels, symptoms, and attitudes of African-American and white women

The purpose of the study was to identify psychiatric symptoms, neurological impairments, and situational factors associated with the emergence of violence and with its persistence. Psychiatric symptoms were assessed in newly admitted physically assaultive psychiatric patients and nonviolent controls. Patients were than evaluated for 4 weeks to determine the persistence or resolution of these physical assaults. Patients who showed marked resolution of assaults were classified as transiently violent (n = 41), and those who remained assaultive throughout were categorized as persistently violent (n = 34). At the end of 4 weeks, all patients received a comprehensive psychiatric and neurological assessment. Physical assaults were associated initially with prominent positive psychotic symptoms. Both transiently and persistently violent patients were more psychotic than the nonviolent controls; however transiently violent patients showed better resolution of these symptoms over the 4 weeks. They also evidenced less frontal lobe impairment on the neurological examination than the persistently violent patients. The two violent groups differed in their susceptibility to environmental influences: the surrounding ward agitation fostered physical assaults in transiently but not in persistently violent patients. This differentiation between transiently and persistently violent patients has major implications for the comprehensive treatment of violent behavior.     

Development of low loss organic-micromachined interconnects on silicon at microwave frequencies

We present the design and development of an ultra-violet (UV) LIGA (a German acronym for electroplating, lithography and molding) micromachining process on silicon substrates at microwave/millimeter wave frequencies. The process employs an ultra-thick negative photoresist SU-8 that can be spin-coated and processed using conventional lithography techniques. Using this process, we have developed micromachined coplanar waveguide (CPW) interconnects on Si substrates. The conductor-backed micromachined CPW on Si (7.2 /spl Omega/-cm) achieves a measured attenuation of 0.18 dB/cm at 20 GHz.     

A 2.2 W, 80 MHz superscalar RISC microprocessor

A 28 mW/MHz at 80 MHz structured-custom RISC microprocessor design is described. This 32-b implementation of the PowerPC architecture is fabricated in a 3.3 V, 0.5 μm, 4-level metal CMOS technology, resulting in 1.6 million transistors in a 7.4 mm by 11.5 mm chip size. Dual 8-kilobyte instruction and data caches coupled to a high performance 32/64-b system bus and separate execution units (float, integer, loadstore, and system units) result in peak instruction rates of three instructions per clock cycle. Low-power design techniques are used throughout the entire design, including dynamically powered down execution units. Typical power dissipation is kept under 2.2 W at 80 MHz. Three distinct levels of software-programmable, static, low-power operation-for system power management are offered, resulting in standby power dissipation from 2 mW to 350 mW. CPU to bus clock ratios of 1×, 2×, 3×, and 4× are implemented to allow control of system power while maintaining processor performance. As a result, workstation level performance is packed into a low-power, low-cost design ideal for notebooks and desktop computers     

A study of solid circulation rate in a circulating fluidized bed

An experimental investigation under cold condition was made to study the effects of some operating/design parameters and non-mechanical L valve configuration on the solid circulation rate in a 4.5 m tall, 0.15 m diameter circulating fluidized bed with riser flow rate varying from 1400 litres/min to 2000 litres/min and bed inventory from 15 kg to 25 kg of sand of average sizes 200 μm, 400 μm and 500 μm. Solid circulation rate was estimated by measuring velocity of sand particle travelling through a vertical Perspex tube section at the bottom of the return leg. It was found to be in the range of 2.8 to 12.3kg/m²s, 0.07 to 9.1kg/m²s and 0.12 to 2.23kg/m²s for sand sizes of 200 μm, 400 μm and 500 μm, respectively for a horizontal L valve. Two mathematical correlations have been developed from the experimental results to predict solid circulation rate as a function of riser flow rate, aeration flow rate, total bed inventory and particle size used.