Electrochemical investigation of electrodeposited Fe-Pd alloy thin films

In the present study, the electrodeposition of Fe, Pd and Fe-Pd alloys, in alkaline solutions, has been investigated. Using ammonium hydroxide and trisodium citrate as the complexing agents, it has been shown that the co-deposition of Fe and Pd is achieved due to diminishing the difference between the reduction potentials of these two metals. Cyclic voltammetry results clearly show that the electrodeposition processes are diffusion-controlled and the diffusion coefficients of Fe²⁺ and Pd²⁺ are 1.11 × 10⁻⁶ and 2.19 × 10⁻⁵ cm² s⁻¹, respectively. The step potential experiments reveal that nucleation mechanism is instantaneous with a typical three-dimensional (3D) growth. At low overpotentials, addition of Pd²⁺ to Fe²⁺ solution leads to a dramatic reduction in the number of nucleation sites, due to this fact that at such overpotentials, the electrodeposition behavior of Pd²⁺ governs on the overall process. The analysis of chemical composition of the electrodeposited films and the number of nucleation sites indicate that at higher overpotential, Fe²⁺ is deposited preferentially, thus the electrodeposition of iron-palladium alloys was classified as an anomalous co-deposition.     

Electrochemical characterization of electrodeposited carbon nanotubes

Carbon nanotubes were electrodeposited in acetonitrile solution at room temperature using Cu, and Fe-Ni nanoparticles as nucleation sites on HF-etched Si(100) wafer substrate. The electrochemical behavior of the deposition was investigated by voltammetry and chronoamperometry techniques. In order to obtain the optimum growth condition, the deposition critical parameters including current density range, potential and time were studied and calculated. Carbon nanotubes with approximate external diameter of 40-100 nm were fabricated under potentiostatic condition and diffusion control at − 20 V in 4-6 h. The film crystallinity was investigated by means of X-ray diffraction and the tubes structure was revealed using scanning electron microscope and transmission electron microscope images. Raman spectroscopy was also employed to characterize the nanostructural features and single wall carbon nanotubes were detected.     

Systematic literature review on city logistics: overview,classification and analysis

City logistics is one of the significant branches of supply chain management, dealing with the logistics and transportation activities in urban areas. This research area has recently appropriated an exponential growth of publications. This paper presents a bibliometric analysis along with a systematic literature review to organise the results of surveying more than 370 papers and research works published since 2010. We identify the top contributing research topics. The most common keywords used in the city logistics literature are referred to in order to propose six research categories identifying the main innovative research perspectives.     

Experiments Design for Hardness Optimization of the Ni-Cr Alloy Electrodeposited by Pulse Plating

The hardness of the Ni-Cr alloy which is electrodeposited in chloride solution,is optimized by design of experiment method(central composite design).Various parameters were evaluated in order to find significant factors in this process.Frequency,duty cycle,current density and temperature were selected as efective factors.Analyses of variance(ANOVA)were performed on the results of the designed experiments.The best model which can predict the hardness of the Ni-Cr alloy electrodeposits was found whereas the frequency and quadratic behaviour of the current density were the most significant model terms.Serious interaction of the current density with frequency and duty cycle also were found in this model.Finally the optimum conditions of the factors for obtaining the maximum hardness of the Ni-Cr alloy were found.Ni-Cr alloy with hardness828 HV(electrodeposited with frequency 63 Hz,current density 1800 A/m2,duty cycle 75%and temperature31℃ bath)were assessed as the optimum deposit.The deposit under the optimum condition was investigated by scanning electron microscopy(SEM),EDX analysis,polarization method and microhardness.     

Field emission of Co nanowires in polycarbonate template

The Co nanowire arrays were synthesized by electrodeposition in polycarbonate template (PC) with 4 μm thickness. Electron field emission properties of cobalt nanowires were studied for wires with different aspect ratios, R ranged between 10 and 60, while the diameter of wires was fixed about 50 nm. The field emission properties of the samples showed low turn on electric field (E_to) with values varying between 2.9 and 11.3 V/μm showing a minimum value for R = 20 (E_to < 3 V/μm). On the other hand, the enhancement factor shows a peak for nanowires length about 1 μm. Field emission data using the Fowler-Nordhiem theory showed nearly straight-line nature confirming cold field emission of electrons. The fabricated field emitter arrays of cobalt nanowires in the PC templates opens the possibility of fabricating flexible flat panel displays.     

A selective encryption for H.264/AVC videos based on scrambling

H.264/Advanced Video Coding (H.264/AVC) is one of the video compression standards that is 50% more efficient than previously introduced standards. Given that the H.264/AVC standard is considered and used in a variety of video applications, it is essential to provide a suitable solution for video encryption with good security, high encryption speed, and to prevent bitrate increases. In this paper, we propose a method selective encryption of H.264/AVC for the digital rights management (DRM) applications. In this method, discrete cosine transform (DCT) coefficients, which affect the texture and content of the H.264/AVC video during compression, are encrypted after the zigzag scanning and based on Context-Adaptive Binary Arithmetic Coding (CABAC). The experimental results and encryption efficiency analysis demonstrate that the proposed method with the format compliance has good security and high encryption speed and it can prevent the bitrate from rising and is thus usable in industrial and the DRM applications.

     

Photoactive and self-cleaning TiO2-SiO2 thin films on 316L stainless steel

In this study, TiO₂-SiO₂ nanocomposite films with different amounts of SiO₂ were prepared by sol-gel process and were coated onto stainless steel 316L. The effect of addition of various amount of SiO₂ in the precursor solution on the photocatalysis, photo-generated hydrophilicity and self-cleaning property of TiO₂ thin films was investigated by X-ray diffraction, Fourier transform infrared spectroscopy, water contact angle measurements and UV spectroscopy. In the tested ranges of SiO₂ content and sintering temperature, the highest photocatalytic activity and self-cleaning property were observed in the 15 mol% SiO₂ sample sintered at 750 °C. Addition of less than 30 mol% SiO₂ had a suppressive effect on the transformation of anatase to rutile and on the crystal growth of anatase in the sintering heat treatment. Phase separation occurred in the composite films for SiO₂ content of 30 mol% or more.     

Experimental investigation into glass fiber/epoxy composite laminates subjected to single and repeated high-velocity impacts of ice

Many engineering components in aerospace structures which are made from polymer composite materials are often damaged during service life due to hail ice and bird impact. This study examines the damage which may be incurred by a single and repeated high-velocity impact of 11.7 g cylindrical-shaped ice on glass fiber/epoxy laminated composite panels carried out on a 20-mm diameter smooth barrel gas gun. The laminates were made from E-glass fiber/epoxy resin with 0/90, ±45, chopped strand mat (CSM) and unidirectional fiber orientation and in different stacking sequence. The impact velocity was in the range of 130–140 m/s and the resulting damage extension zones from ice projectile impacts were measured. Damage extension was successfully identified in all specimens subjected to high-velocity ice projectile impact. Results showed specimens with ±45 orientation and CSM fiber exhibited the lowest damage extension. The results also revealed that specimens with plain weave 0/90 lay-up of glass woven roving show the highest damage extension. Extended damages were observed in composite panels under repeated ice projectile impacts. Study of the stacking sequence effect indicated significant role played by presence of ±45 reinforcement in reducing the damage extension in the laminated plates. Delamination constituted the major damage mechanism for most specimens tested followed by matrix and fiber fracture.     

An investigation on the electrochemical behavior of the Co/Cu multilayer system

Co/Cu multilayers were deposited in a sulfate solution by controlling the current and potential for the deposition of cobalt and copper layer respectively. The electrochemical behavior of these multilayers was studied by cyclic voltammetry and current transients. In addition, a mathematical analysis was used to characterize the electrodeposition system. Simultaneously, the nucleation and growth mechanisms were monitored by these techniques. In this case, the results clearly showed that electrodeposition of cobalt layers was a kinetically controlled process while the reduction of copper ions was a diffusion-control process. Although nucleation mechanism of the single Co deposit was found as a progressive system, it was found as an instantaneous system with three-dimensional growth mechanism in the Co/Cu bilayer deposition. Atomic Forced Microscopy images of the Co/Cu multilayer also confirmed the aforementioned nucleation mechanism, where it was expected that the growth of multilayer films would form a laminar-type structure containing a large number of equally-sized rounded grains in each layer.