综合线损分析系统研究

描述了综合线损分析系统应该具有的主要功能和分析内容，介绍了系统实现中应该注意的几个问题、系统内容和实现方法。     

护环液压胀形法的新发展及外补液胀形法的生产应用

本文论述了现有液压胀形法生产护环所存在的不足,介绍了新一代液压胀形工艺即外补液胀形的原理、优点,以及在我国首次生产应用中所显示出的明显的技术经济效益。     

基于人工神经网络的偏微分方程求解方法

针对各种微分方程传统的数值方法的求解中,传统的数值方法在求解微分方程时存在计算存储量、计算时间等都随着微分方程维数的增加而剧烈增长的问题,严重制约了高维问题的求解.提出一种求解偏微分方程的神经网络方法.通过数值算例说明,神经网络方法在求解微分方程问题上有高效率、很好地泛化等优点,为偏微分方程求解提供了一种有效的新途径.     

Application of electrode materials and catalysts in electrocatalytic treatment of dye wastewater

The dye industry produces a large amount of hazardous wastewater every day worldwide, which brings potential threaten to the global environment. As an excellent method for removal of water chroma and chemical oxygen demand, electrocatalytic methods are currently widely used in the treatment of dye wastewater. The selection and preparation of electrode materials and electrocatalysts play an important role on the electrocatalytic treatment. The aim of this paper is to introduce the most excellent high-efficiency electrode materials and electrocatalysts in the field of dye wastewater treatment. Many electrode materials such as metal electrode materials, boron-doped diamond anode materials and three-dimensional electrode are introduced in detail. Besides, the mechanism of electrocatalytic oxidation is summarized. The composite treatment of active electrode and electrocatalyst are extensively examined. Finally, the progress of photo-assisted electrocatalytic methods of dye wastewater and the catalysts are described.     

新型系列准贝氏体钢

介绍了我们多年的研究成果－－新型系列准贝氏体钢，该系列钢具有独特的组织和性能，以及广阔的应用前景。     

表面处理对氮化硅陶瓷力学性能的影响

采用X射线衍射应力分析的sin2ψ法计算了Si3N4陶瓷试样的残余应力，并分别测量了表面处理前后Si3N4试样的力学性能。结果表明，经平面磨削后的Si3N4试样表面残余应力为拉应力，而抛光处理可适当降低残余应力。两种方法都使试样抗弯强度降低。     

铅酸电池管式正极添加四碱式硫酸铅晶种的研究

在铅酸电池正极铅粉中加入一定量的四碱式硫酸铅（4BS）,按照工业化的操作工艺,制备出原料中4BS含量不同的正极板,并与常规负极板组装成小电池。对正极的初始容量和循环寿命等电化学性能做了测试,结果表明,在添加粒径为1.5 μm的4BS质量分数达1%时,65 ℃固化后,正极初始容量和循环寿命分别为未加4BS正极的1.02倍和1.06倍,4BS的加入提升了电池容量和电池寿命等的综合性能;XRD结果显示,原料中加4BS的正极中β-PbO₂含量稍高于未加4BS的正极;SEM结果显示,加4BS的正极活性物质更细小,大小更均匀。     

《金银岛》中约翰·西尔弗的角色分析

约翰·西尔弗是小说<金银岛>中的一个重要角色.借助弗洛伊德的"唯乐原则"和"现实原则"分析了西尔弗的所作所为,指出了西尔弗的欲望和无奈的根源.     

基于FDTD法的开孔腔体电磁耦合效应研究

基于FDTD(时域有限差分法)对任意入射电磁波对电子设备带孔缝腔体的耦合效应进行了研究。对典型电子设备的开孔腔体进行仿真,计算不同情形下腔体内场强分布,根据仿真数据进行分析,得出一定的耦合规律,从而进行更好的屏蔽设计。研究结果表明:入射波正对孔缝照射时耦合效应最强,背面照射次之,腔体侧面照射时耦合效应最弱;入射波极化方向与孔缝长边垂直时耦合效应最强,两者角度越小耦合效应越弱;孔缝在腔体壁正中心时耦合效应最强,越靠近边缘耦合效应越弱;孔缝形状和入射波极化角度的规律一致,即孔缝与入射场强垂直的边越长,则入射波对腔体的耦合效应越强。     

Optimal Design of Two-Chamber Gas Distributor with CFD Approach

Computational fluid dynamics( CFD) is used to investigate a new type of two-chamber natural gas distributor,which has a natural gas inlet and nine nozzle outlets. The uniformity at the outlet of distributor is practice proven to have significant degree influence on its comprehensive performance. To improve the uniformity at the nozzles of the gas distributor,CFD modeling with the RNG k-ε turbulence model is undertaken to understand the mass flow rate of nozzles with reference to different length of chambers and the most optimal length is obtained. The internal flow pattern of the natural gas distributor is analyzed. It is found that the local maximum deviation of the nozzle outflow rate increases with the increase of chambers length when the length is more than 64 mm. The results provide useful suggestions for the optimal design of two-chamber natural gas distributor.