Granulation time in fluidized bed granulators

Size enlargement of particles in fluidized bed granulation involves mixing of particles with a binder liquid to form larger wet granules and drying them to form dry granules. Identification of the time for completion of granulation process is critical as further fluidization of dry granules is providing extra energy for their attrition. Monitoring the bed pressure drop and bed temperature of a batch fluidized bed granulator with time can provide information on the time for completion of the granulation process. Experimental observations on granulation time and size of granules in a lab-scale batch fluidized bed granulator are presented. Model based equations are developed for the estimation of granulation time and size of granules.     

Effects of Pressure on the Performance of CNTs-Supported Catalyst in a Fischer-Tropsch Reaction

Fischer-Tropsch （FT） reaction involves conversion of syngas （a mixture of carbon monoxide and hydrogen） into higher hydrocarbons in the presence of an active catalyst. The syngas can be derived from non-petroleum feedstocks such as coal, biomass and natural gas, thus the FT reaction provides an alternative route for production of clean fuels. The FT process has received growing interest in recent years due to uncertainty in the Middle East, fast depletion of fossil fuel and environmental concern. This paper reports the synthesis, physicochemical properties and catalytic performance of cobalt-based catalyst in the FT reaction. The catalysts comprised metal nanoparticles supported on carbon nanotubes （CNTs） which were synthesized via a wet impregnation method. The catalysts were characterized using transmission electron microscopy （TEM）, temperature-programmed reduction/desorption （TPR/TPD） and X-ray photoelectron spectroscopy （XPS）. The performance of the cobalt-based catalyts in a FT reaction was evaluated in a fixed bed microreactor equipped with an on-line gas chromatograph for analyses of hydrocarbon products. The catalysts investigated in this work were Co/CNTs, 70Co30Mn/CNTs, 0.06%K/70Co30Fe/CNTs and 0.04%Nb/70Co30Fe/CNTs. TEM analyses revealed that the average sizes of the metal nanoparticles were 4-5 nm. Based on TPD analyses, the dispersion of these nanoparticles on CNTs were greater than 90%. The presence of both Co2＋ and Co3＋ ions were confirmed by XPS analysis. The 0.04% Nb/70Co30Fe/CNTs catalyst performed better than other catalysts in the FT reaction where it resulted in CO conversion of 35% and 16% C5＋ selectivity at pressure of 1 bar, 220 ~C and H2：CO of 2：1. Using the same catalyst, the CO conversion and C5＋ selectivity increased to 60% and 57%, respectively when the pressure was increased to 20 bar.     

Enhanced in situ ethanolysis of Jatropha curcas L. in the presence of cetyltrimethylammonium bromide as a phase transfer catalyst

Limited solubility of alcohols in vegetable oils hinders transesterification reaction process. Phase transfer catalysis can be of great advantage to enhance the reaction rates. Addition of cetyltrimethylammonium bromide as a phase transfer catalyst on in situ transesterification of Jatropha curcas L. with alkaline ethanol was investigated. Use of cetyltrimethylammonium bromide increased the yield of fatty acid ethyl esters. Optimum operating conditions were experimentally established. Yield of fatty acid ethyl esters increased from 89.2 wt% to 99.5 wt% with reduced requirement of ethanol by 16.7 v%, sodium hydroxide catalyst by 33.3 wt%, at a lower temperature of 30 °C and reduced mixing speed in shorter reaction time. The quality of fatty acid ethyl esters fuel conforms to the standards of ASTM D6751 and EN-14214.     

T1rho-relaxation in articular cartilage: effects of enzymatic degradation

Spin-lattice relaxation in the rotating frame (T1rho) dispersion spectroscopy and imaging were used to study normal and enzymatically degraded bovine articular cartilage. Normal specimens demonstrate significant T1rho "dispersion" (approximately 60 to approximately 130 ms) in the 100 Hz to 9 kHz frequency range. Proteoglycan-degraded specimens have 33% greater T1rho values than collagen-degraded or normal samples. T1rho-weighted images reveal structure not found in conventional T1- or T2-weighted images. Our results suggest that T1rho measurements are selectively sensitive to proteoglycan content. The potential of this method in distinguishing the early degenerative changes in cartilage associated with osteoarthritis is discussed.     

Adaptive leases: a strong consistency mechanism for the World Wide Web

We argue that weak cache consistency mechanisms supported by existing Web proxy caches must be augmented by strong consistency mechanisms to support the growing diversity in application requirements. Existing strong consistency mechanisms are not appealing for Web environments due to their large state space or control message overhead. We focus on the lease approach that balances these trade-offs and present analytical models and policies for determining the optimal lease duration. We present extensions to the HTTP protocol to incorporate leases and then implement our techniques in the Squid proxy cache and the Apache Web server. Our experimental evaluation of the leases approach shows that: 1) our techniques impose modest overheads even for long leases (a lease duration of 1 hour requires state to be maintained for 1030 leases and imposes an per-object overhead of a control message every 33 minutes), 2) leases yields a 138-425 percent improvement over existing strong consistency mechanisms, and 3) the implementation overhead of leases is comparable to existing weak consistency mechanisms.     

A model for cluster size in risers

Particles in gas-solid flows aggregate to move as “clusters” and simultaneously develop gas “voids” free of particles. A model for gas-solid flow in risers considering the presence of clusters and voids is presented. Equations are developed to estimate the size of clusters considering “ratio of cluster volume to void volume to be equal to the ratio of cluster volumetric fraction to void volumetric fraction in the bed”. Estimates of cluster size compare well with the experimental observations reported in the literature. Equations developed for slip ratios and gas to particle effective drag coefficients are inline with the trends reported in the literature.