Three ways to implement interfacial techniques: application tomeasurements of chromatic dispersion, birefringence, and nonlinearsusceptibilities

Depending on the spectal width of the source illuminating an interferometer, measurement procedures can utilize either the whole interferogram, or only the fringe envelope, or only the fringe quick oscillations. With an ultraband spectrum source, a simplified adaptation of the methods of Fourier transform spectroscopy yields the variations of the test-fiber propagation constant over the whole wavelength-interval of the source. Chromatic dispersion can then be computed from a single interferogram. With narrower spectrum sources, only the fringe envelopes are utilized and yield measurements of mode delay, with application to chromatic and polarization mode dispersion. In this case, however, interferograms at several wavelengths are necessary. With even narrower spectrum sources, the fringe quick oscillations provide measurements of phase shifts, related to changes in the mode propagation constant, when outside perturbations are applied to the test fiber. A direct method for measuring the third-order nonlinear susceptibilities is discussed. In this case the outside perturbation is an intense pump laser field     

Allelopathic effect of phenolic acids from humic solutions on two spruce mycorrhizal fungi:Cenococcum graniforme andLaccaria laccata

The aim of this investigation was to determine the impact ofp-hydroxyacetophenone,p-hydroxybenzoic acid, catechol, and protocatechuic acid on respiration of two spruce mycorrhizal fungi:Laccaria laccata andCenococcum graniforme. These phenols are produced byVaccinium myrtillus,Athyrium filixfemina, andPicea abies, predominant species of spruce forests in the Alps, and they are also present in humic solutions at 10^–10 M or 10^–5 M. Respiration of the two fungi was inhibited by the four phenolic acids, even at concentrations ranging from 10^–5 M to 10^–7 M. These data show phenolic acids from humic solutions have biological activity at extremely low concentrations, suggesting a contribution ofV. myrtillus, A. filixfemina, andP. abies to allelopathic inhibition of mycorrhizal fungi.     

Polymer aqueous solutions as quenching media. II. Ethylene oxide–propylene oxide copolymers

The cooling power of aqueous solutions of ethylene oxide-propylene oxide copolymers are studied with a silver standard sample by using two apparatuses quench with injection and quench with agitation. For temperature T>400°C, the viscosity plays the predominant role; for T<400°C, the cooling is controlled by the polymer precipitation and the cooling rate decreases by lowering the cloud point of the polymer solution. This work demonstrates the possibility of adjusting the cooling curves by taking into account the thermodynamical properties of the polymer.     

An EKV-based high voltage MOSFET model with improved mobility and drift model

An EKV-based high voltage MOSFET model is presented. The intrinsic channel model is derived based on the charge based EKV-formalism. An improved mobility model is used for the modeling of the intrinsic channel to improve the DC characteristics. The model uses second order dependence on the gate bias and an extra parameter for the smoothening of the saturation voltage of the intrinsic drain. An improved drift model [Chauhan YS, Anghel C, Krummenacher F, Ionescu AM, Declercq M, Gillon R, et al. A highly scalable high voltage MOSFET model. In: IEEE European solid-state device research conference (ESSDERC), September 2006. p. 270–3; Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] is used for the modeling of the drift region, which gives smoother transition on output characteristics and also models well the quasi-saturation region of high voltage MOSFETs. First, the model is validated on the numerical device simulation of the VDMOS transistor and then, on the measured characteristics of the SOI-LDMOS transistor. The accuracy of the model is better than our previous model [Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] especially in the quasi-saturation region of output characteristics.     

The correlation between the thermoelectric properties and stoichiometry in the boron carbide phase B4C-B10.5C

Electrical conductivity, thermoelectrical power and thermal conductivity measurements on boron carbide samples show that the electrical conductivity follows the small polaron hopping theory and that thermal conductivity occurs by phonon diffusion. The evolution of these properties with carbon content illustrates the particular role played by the 13.3 at% C compound in the phase homogeneity range B_10.5C to B₄C. The value of the figure of merit (0.85×10^–3 K at 1250 K) proves that this particular boron carbide compound could be a very interesting candidate material for high-temperature thermoelectrical conversion.     

Association of IgG1 Antibody Clearance with FcγRIIA Polymorphism and Platelet Count in Infliximab-Treated Patients

The FcγRIIA/CD32A is mainly expressed on platelets, myeloid and several endothelial cells. Its affinity is considered insufficient for allowing significant binding of monomeric IgG, while its H131R polymorphism (histidine > arginine at position 131) influences affinity for multimeric IgG2. Platelet FcγRIIA has been reported to contribute to IgG-containing immune-complexe clearance. Given our finding that platelet FcγRIIA actually binds monomeric IgG, we investigated the role of platelets and FcγRIIA in IgG antibody elimination. We used pharmacokinetics analysis of infliximab (IgG1) in individuals with controlled Crohn’s disease. The influence of platelet count and FcγRIIA polymorphism was quantified by multivariate linear modelling. The infliximab half-life increased with R allele number (13.2, 14.4 and 15.6 days for HH, HR and RR patients, respectively). It decreased with increasing platelet count in R carriers: from ≈20 days (RR) and ≈17 days (HR) at 150 × 10⁹/L, respectively, to ≈13 days (both HR and RR) at 350 × 10⁹/L. Moreover, a flow cytometry assay showed that infliximab and monomeric IgG1 bound efficiently to platelet FcγRIIA H and R allotypes, whereas panitumumab and IgG2 bound poorly to the latter. We propose that infliximab (and presumably any IgG1 antibody) elimination is partly due to an unappreciated mechanism dependent on binding to platelet FcγRIIA, which is probably tuned by its affinity for IgG2.     

RF MEMS continuous reversible variable inductor based on a microfluidic network

In this work, RF MEMS continuous reversible variable inductor has been fabricated by using microelectronic technology and lamination process. We review, evaluate and compare this variable inductor with other work. The proposed inductor is a dual circular coil and has an inductance of few nH. The fundamental idea is to place a liquid droplet between the metal turns of a coil in order to modify the capacitive/resistive coupling between metal tracks and hence to change the stored magnetic energy. The SU-8 resin was used to realize the microfluidic channels and Au as metallic tracks. To prove the reversibility of the inductor, two cases were studied: filling and emptying of channels. The tuning range of the inductance is approximately 107 % at 1.6 GHz, making these devices very suitable as building blocks in many RF applications.     

A single phase model of mechanisms effecting miscible surfactant oil recovery

The concept of volume averaging is used to theoretically study the mechanisms of mass dispersion, adsorption, and dead-space volume. These mechanisms are important to the understanding of miscible surfactant flooding. After simpiffication based on order-of-magnitude scaling, a linear core model is solved using state variable finite-difference techniques. Mass dispersion and adsorption are shown to be important model parameters while dead-space volume is a rather insensitive model parameter.     

Synthesis, structure and catalytic properties of Fe-substituted barium hexaaluminates

A sol–gel method using Ba and Al isopropylates and iron nitrate has been used to synthesise barium hexaaluminate partially substituted with iron. After calcination under oxygen at 1200°C the -alumina structure was obtained. Formation of the mixed BaFe_xAl_12-xO₁₉ phase occurred for x=1–4. XRD measurements showed a good crystallinity of the structure and expansion of unit cell parameters due to the presence of larger Fe³⁺ ions substituting Al³⁺ ones in octahedral sites only. Mössbauer spectroscopy revealed that Fe³⁺ ions are present in four different octahedral sites slightly distorted. Catalytic activity in methane combustion showed that an optimum was obtained for solid containing 2 Fe ions per unit cell: the increase of the amount of introduced iron was counterbalanced by the decrease of specific surface area. Intrinsic activities have been calculated for the four solids in both the fresh and aged states. It is observed that increasing iron content increases relative activities in the same ratio as the populations of iron located in two sites as deduced from Mössbauer spectroscopy. It is then tentatively assumed that activity is attributed to octahedrally coordinated Fe³⁺ ions in some specific sites.