Journal of Materials Science - Chitosan is one of the natural cationic polymers with unique properties such as non-toxicity, biodegradability, biocompatibility, environmentally friendly that has... 相似文献
Abnormal activation of Toll-like receptor (TLRs) signaling can result in colon cancer development. The aim of this study was to investigate the expression of important TLRs in different histological types of colorectal polyps and evaluate their relationship with intestinal microbiota. The expression levels of TLR2, 3, 4, and 5 were analyzed in intestinal biopsy specimens of 21 hyperplastic polyp (HP), 16 sessile serrated adenoma (SSA), 29 tubular adenoma (TA), 21 villous/tubulovillous (VP/TVP) cases, and 31 normal controls. In addition, selected gut bacteria including Streptococcus bovis, Enterococcus faecalis, Enterotoxigenic Bacteroides fragilis (ETBF), Fusobacterium nucleatum, Porphyromonas spp., Lactobacillus spp., Roseburia spp., and Bifidobacterium spp. were quantified in fecal samples using absolute qRT PCR, and, finally, the association between TLRs and these gut microbiota- was evaluated by Spearman’s correlation coefficient. Higher expression of TLR2 and TLR4 in VP/TVP and TA, and lower expression levels of TLR3 and TLR5 in all type of polyps were observed. The differences in TLR expression patterns was not only dependent on the histology, location, size, and dysplasia grade of polyps but also related to the intestinal microbiota patterns. TLR2 and TLR4 expression was directly associated with the F. nucleatum, E. faecalis, S. bovis, Porphyromonas, and inversely to Bifidobacterium, Lactobacillus, and Roseburia quantity. Furthermore, TLR3 and TLR5 expression was directly associated with Bifidobacterium, Roseburia, and Lactobacillus quantity. Our results suggest a possible critical role of TLRs during colorectal polyp progression. An abnormal regulation of TLRs in relation to gut microbial quantity may contribute to carcinogenesis. 相似文献
Most of the commonly used hydrological models do not account for the actual evapotranspiration (ETa) as a key contributor to water loss in semi-arid/arid regions. In this study, the HEC-HMS (Hydrologic Engineering Center Hydrologic Modeling System) model was calibrated, modified, and its performance in simulating runoff resulting from short-duration rainfall events was evaluated. The model modifications included integrating spatially distributed ETa, calculated using the surface energy balance system (SEBS), into the model. Evaluating the model’s performance in simulating runoff showed that the default HEC-HMS model underestimated the runoff with root mean squared error (RMSE) of 0.14 m3/s (R2?=?0.92) while incorporating SEBS ETa into the model reduced RMSE to 0.01 m3/s (R2?=?0.99). The integration of HECHMS and SEBS resulted in smaller and more realistic latent heat flux estimates translated into a lower water loss rate and a higher magnitude of runoff simulated by the HECHMS model. The difference between runoff simulations using the default and modified model translated into an average of 95,000 m3 runoff per rainfall event (equal to seasonal water requirement of ten-hectare winter wheat) that could be planned and triggered for agricultural purposes, flood harvesting, and groundwater recharge in the region. The effect of ETa on the simulated runoff volume is expected to be more pronounced during high evaporative demand periods, longer rainfall events, and larger catchments. The outcome of this study signifies the importance of implementing accurate estimates of evapotranspiration into a hydrological model.
Ultra-high-performance concrete (UHPC) is a recent class of concrete with improved durability, rheological and mechanical and durability properties compared to traditional concrete. The production cost of UHPC is considerably high due to a large amount of cement used, and also the high price of other required constituents such as quartz powder, silica fume, fibres and superplasticisers. To achieve specific requirements such as desired production cost, strength and flowability, the proportions of UHPC’s constituents must be well adjusted. The traditional mixture design of concrete requires cumbersome, costly and extensive experimental program. Therefore, mathematical optimisation, design of experiments (DOE) and statistical mixture design (SMD) methods have been used in recent years, particularly for meeting multiple objectives. In traditional methods, simple regression models such as multiple linear regression models are used as objective functions according to the requirements. Once the model is constructed, mathematical programming and simplex algorithms are usually used to find optimal solutions. However, a more flexible procedure enabling the use of high accuracy nonlinear models and defining different scenarios for multi-objective mixture design is required, particularly when it comes to data which are not well structured to fit simple regression models such as multiple linear regression. This paper aims to demonstrate a procedure integrating machine learning (ML) algorithms such as Artificial Neural Networks (ANNs) and Gaussian Process Regression (GPR) to develop high-accuracy models, and a metaheuristic optimisation algorithm called Particle Swarm Optimisation (PSO) algorithm for multi-objective mixture design and optimisation of UHPC reinforced with steel fibers. A reliable experimental dataset is used to develop the models and to justify the final results. The comparison of the obtained results with the experimental results validates the capability of the proposed procedure for multi-objective mixture design and optimisation of steel fiber reinforced UHPC. The proposed procedure not only reduces the efforts in the experimental design of UHPC but also leads to the optimal mixtures when the designer faces strength-flowability-cost paradoxes.
International Journal of Computer Vision - Visual place recognition (VPR) is the process of recognising a previously visited place using visual information, often under varying appearance... 相似文献
Congestion is one of the most important challenges in optical networks. In a Passive Optical Network (PON), the Optical Line Terminal (OLT) is a bottleneck and congestion prone. In this paper, a framework is proposed with Forward Error Correction (FEC) at the IP layer combined with Weighted Round Robin (WRR) at the scheduling level to overcome packet-loss due to congestion in the OLT in order to achieve efficient video multicasting over PON. In the FEC scheme, Reed-Solomon (RS(n,k)) with erasure coding is used, where (n−k) erroneous symbols per n symbol blocks can be corrected. In our framework, an Internet Protocol TeleVision (IPTV) service provider uses the mentioned RS coding and generates redundant packets from regular IPTV packets in such a way that an Optical Network Unit (ONU) can recover lost packets from received packets, thus resulting in a better video quality. Simulation results show that using the proposed framework, an ONU can recover many lost packets and achieve better video quality under different traffic loads for its users. For instance, the proposed method can reduce packet loss rate by almost 55% and 10% under traffic load 0.9, respectively, compared with the Round Robin (RR) and WRR methods under symmetric traffic load. When High Receivers Queue (HRQ) traffic (i.e., traffic received by many users) is twice Low Receivers Queue (LRQ) traffic (i.e., traffic received by a small number of users), this reduction is almost 86% and 30% under traffic load 0.9. Finally, when LRQ traffic is twice HRQ traffic, the reduction in packet loss rate is almost 70% and 91% at traffic load 0.5. 相似文献
Poly(2-hydroxyethyl methacrylate) (pHEMA) as a biomaterial with excellent biocompatibility and cytocompatibility elicits a minimal immunological response from host tissue making it desirable for different biomedical applications. This article seeks to provide an in-depth overview of the properties and biomedical applications of pHEMA for bone tissue regeneration, wound healing, cancer therapy (stimuli and non-stimuli responsive systems), and ophthalmic applications (contact lenses and ocular drug delivery). As this polymer has been widely applied in ophthalmic applications, a specific consideration has been devoted to this field. Pure pHEMA does not possess antimicrobial properties and the site where the biomedical device is employed may be susceptible to microbial infections. Therefore, antimicrobial strategies such as the use of silver nanoparticles, antibiotics, and antimicrobial agents can be utilized to protect against infections. Therefore, the antimicrobial strategies besides the drug delivery applications of pHEMA were covered. With continuous research and advancement in science and technology, the outlook of pHEMA is promising as it will most certainly be utilized in more biomedical applications in the near future. The aim of this review was to bring together state-of-the-art research on pHEMA and their applications. 相似文献
Parallel machines are extensively used to increase computational speed in solving different scientific problems. Various topologies with different properties have been proposed so far and each one is suitable for specific applications. Pyramid interconnection networks have potentially powerful architecture for many applications such as image processing, visualization, and data mining. The major advantage of pyramids which is important for image processing systems is hierarchical abstracting and transferring the data toward the apex node, just like the human being vision system, which reach to an object from an image. There are rapidly growing applications in which the multidimensional datasets should be processed simultaneously. For such a system, we need a symmetric and expandable interconnection network to process data from different directions and forward them toward the apex. In this paper, a new type of pyramid interconnection network called Non-Flat Surface Level (NFSL) pyramid is proposed. NFSL pyramid interconnection networks constructed by L-level A-lateral-base pyramids that are named basic-pyramids. So, the apex node is surrounded by the level-one surfaces of NFSL that are the first nearest level of nodes to apex in the basic pyramids. Two topologies which are called NFSL-T and NFSL-Q originated from Trilateral-base and Quadrilateral-base basic-pyramids are studied to exemplify the proposed structure. To evaluate the proposed architecture, the most important properties of the networks are determined and compared with those of the standard pyramid networks and its variants. 相似文献
Time-based Software Transactional Memory (STM) exploits a global clock to validate transactional data and guarantee consistency of transactions. While this method is simple to implement it results in contentions over the clock if transactions commit simultaneously. The alternative method is thread local clock (TLC) which exploits local variables to maintain consistency of transactions. However, TLC may increase false aborts and degrade performance of STMs. In this paper, we analyze global clock and TLC in the context of STM systems, highlighting both the implementation trade-offs and the performance implications of the two techniques. We demonstrate that neither global clock nor TLC is optimum across applications. To counter this challenge, we introduce two optimization techniques: The first optimization technique is Adaptive Clock (AC) which dynamically selects one of the two validation techniques based on probability of conflicts. AC is a speculative approach and relies on software O-GEHL predictors to speculate future conflicts. The second optimization technique is AC+ which reduces timing overhead of O-GEHL predictors by implementing the predictors in hardware. In addition, we exploit information theory to eliminate unnecessary computational resources and reduce storage requirements of the O-GEHL predictors. Our evaluation with TL2 and Stamp benchmark suite reveals that AC is effective and improves execution time of transactional applications up to 65%. 相似文献