ARP-P4: deep analysis of a hybrid SDN ARP-Path/P4Runtime switch

Telecommunication Systems - The Software-Defined Networking (SDN) architecture decouples the control plane from the data plane, but it does not explicitly state where the control should be located....     

Thermal-lens and photo-acoustic methods for the determination of SiC thermal properties

In this paper we report the use of photothermal techniques such as Thermal lens (TL) spectrometry, Photoacoustic and heat capacity, ρc_p, to determine the thermo-optical parameters, such as thermal conductivity (K), thermal diffusivity (D), specific heat (c_p) and the optical path dependence with temperature (ds/dT), of an undoped polycrystalline 3C-SiC. To our knowledge, this is the first time that Thermal lens technique is used for wide band-gap systems. Results obtained for the polycrystalline sample with TL technique indicates that ds/dT is negative at room temperature. Moreover, the obtained values of thermal diffusivity and thermal conductivity are in good agreement with that found in the literature, indicating that the phototermal techniques can be used to obtain the referred parameters in circumstances where other techniques cannot be used, for example, in harsh environments.     

An integrated system to remote monitor and control anaerobic wastewater treatment plants through the internet.

The TELEMAC project brings new methodologies from the Information and Science Technologies field to the world of water treatment. TELEMAC offers an advanced remote management system which adapts to most of the anaerobic wastewater treatment plants that do not benefit from a local expert in wastewater treatment. The TELEMAC system takes advantage of new sensors to better monitor the process dynamics and to run automatic controllers that stabilise the treatment plant, meet the depollution requirements and provide a biogas quality suitable for cogeneration. If the automatic system detects a failure which cannot be solved automatically or locally by a technician, then an expert from the TELEMAC Control Centre is contacted via the internet and manages the problem.     

Watermarked 3-D Mesh Quality Assessment

This paper addresses the problem of assessing distortions produced by watermarking 3D meshes. In particular, a new methodology for subjective evaluation of the quality of 3D objects is proposed and implemented. Two objective metrics derived from measures of surface roughness are then proposed and their efficiency to predict the perceptual impact of 3D watermarking is assessed and compared with the state of the art. Results obtained show good correlations between the proposed objective metrics and subjective assessments by human observers     

Comparison of a modified Sugiura procedure with portal systemic shunt for prevention of recurrent variceal bleeding in cirrhosis

BACKGROUND: There is no agreement on the management of patients with cirrhosis and recurrent variceal bleeding after failure of medical or endoscopic treatments or both. Portal systemic shunts are highly effective in preventing rebleeding but are associated with a high incidence of chronic encephalopathy. This study compared the results of a slightly modified Sugiura procedure (esophageal transection plus esophagogastric devascularization plus splenectomy) with those of nonselective portal systemic shunts in patients with previous variceal bleeding. METHODS: Fifty-four patients were included in this randomized controlled study between January 1984 and April 1989. The major end point was chronic encephalopathy. Secondary end points were recurrent variceal bleeding, survival, ascites, and hepatocellular carcinoma. RESULTS: Twenty-seven patients were assigned to each group. The rate of chronic encephalopathy was significantly (p = 0.002) lower after modified Sugiura procedure than after portal systemic shunt. Recurrent variceal bleeding was more frequent after modified Sugiura procedure than after portal systemic shunt, but the difference is not significant. One-, two-, and three-year survival rates were 93%, 81%, and 67%, respectively, in the modified Sugiura group and 78%, 66%, and 39%, respectively, in the portal systemic shunt group (p = 0.044). CONCLUSIONS: These results suggest that the modified Sugiura procedure is better overall than the nonselective portal systemic shunt in the management of patients with cirrhosis and recurrent variceal bleeding. Although the rebleeding rate is higher after the modified Sugiura procedure, this does not seem to affect mortality in these patients.     

Transmission loss allocation through equivalent bilateral exchanges and economical analysis

A new loss allocation (LA) scheme based on the principle of equivalent bilateral exchanges (EBEs) is presented and compared with other available techniques. Formulation and results from extensive simulations including consistency tests show that the suggested methodology has several desirable properties: It is flow-based, requiring only a solved load flow for its implementation; it is not dependent on the choice of a slack bus; it is straightforward to apply; undesirable negative loss allocation is not produced; and low volatilities are shaped. An economic analysis with various LA methods is also carried out when these are integrated into a combined economic dispatch/load flow dispatch strategy, a likely scenario for LA in a real system. This combined dispatch strategy yields prices charged to the loads and rates received by the generators that account for loss allocation and loss supply. Results show that these economic indexes are very close to the marginal costs derived from an optimal power flow (OPF) approach with the advantage of reducing volatility.     

Unusual essential oils with aromatic properties

Summary The essential oil obtained by steam distillation of cinchona bark (Cinchona spp.,Rubiaceae family) — a plant well known for its pharmacological properties, also employed in the food industry, especially in making liqueurs - was investigated. The oil, of completely unknown chemical composition, was analyzed by GLC and GLC/MS after separation on a silica gel column, and one hundred components were identified. The presence of 2-hexyl-3-methylmaleic anhydride is rather unusual.

---

Ungewöhnliche ätherische Öle mit aromatischen Eigenschaften. Die flüchtigen Aromastoffe der China-Rinde

Zusammenfassung Es wurde ätherisches Öl analysiert, das durch Wasserdampfdestillation von Chinarinde (Cinchona spp. derRubiaceae-Familie) gewonnen wurde. Diese Pflanze ist aufgrund ihrer pharmakologischen Eigenschaften bekannt und wird auch in der Lebensmittelindustrie verwendet, ganz besonders für die Likör- und Magenbitterherstellung. Die chemische Zusammensetzung dieses Öls war unbekannt. Nach Abtrennung auf einer Kieselgelsäule wurden im Öl mit GLC und GLC/MS etwa 100 Verbindungen identifiziert. Das Vorhandensein von 2-Hexyl-3-methyl-maleinsäureanhydrid ist ziemlich ungewöhnlich.

     

Epoxide polymerization

Summary Poly(propylene oxide), PPO, obtained using diphenylzinc, Ph₂Zn, and using the diphenylzinc-water system at various molar ratios H₂O/Ph₂Zn, were studied through ¹H NMR and IR spectroscopy establishing that the polymerization initiates by coordition of propylene oxide (PO) to a terminal zinc atom of the active species followed by consecutive insertions of PO units at this zinc atom. The PPO obtained showed Ph-and HO-, HO-and HO-end-groups depending on the molar ratio H₂O/Ph²Zn used, and also HO-and PhO-end-groups when oxygen was present in the polymerization system.     

Development of calibration models for quality control in the production of ethylene/propylene copolymers by FTIR spectroscopy,multivariate statistical tools,and artificial neural networks

Principal component regression (PCR), partial least squares (PLS), StepWise ordinary least squares regression (OLS), and back‐propagation artificial neural network (BP‐ANN) are applied here for the determination of the propylene concentration of a set of 83 production samples of ethylene–propylene copolymers from their infrared spectra. The set of available samples was split into (a) a training set, for models calculation; (b) a test set, for selecting the correct number of latent variables in PCR and PLS and the end point of the training phase of BP‐ANN; (c) a production set, for evaluating the predictive ability of the models. The predictive ability of the models is thus evaluated by genuine predictions. The model obtained by StepWise OLS turned out to be the best one, both in fitting and prediction. The study of the breakdown number of samples to be included in the training set showed that at least 52 experiments are necessary to build a reliable and predictive calibration model. It can be concluded that FTIR spectroscopy and OLS can be properly employed for monitoring the synthesis or the final product of ethylene–propylene copolymers, by predicting the concentration of propylene directly along the process line. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008