Effect of nitrogen on the antibacterial behavior of oxynitride glasses

The main drawback of bioglasses is their restricted use in load bearing applications and the consequent need to develop stronger glassy materials. This has led to the consideration of oxynitride glasses for numerous biomedical applications. This paper investigated two different types of glasses at a constant cationic ratio, with and without nitrogen (a N containing and a N-free glass composition) to better understand the effect of N on the biological properties of glasses. The results revealed that the addition of N increased the glass transition temperature, isoelectric point (IEP) and slightly increased wettability. Moreover, compared to N including glass, N-free glass exhibited better anti-bacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), two key bacteria that infect implants. In summary, these in vitro results indicated that amine functional groups existing in N containing glasses which are missing in N-free glasses, caused a slight difference in wetting behavior and a more obvious change in isoelectric point and in bacterial response. N-free glasses exhibited better inhibitory results both against E. coli and S. aureus compared to N including glass suggesting that oxygen rich glasses should be further studied for their novel antibacterial properties.     

Production of hydrogen over bimetallic Pt–Ni/δ-Al2O3: I. Indirect partial oxidation of propane

Indirect partial oxidation (IPOX) of propane was studied over bimetallic 0.2 wt.% Pt–15 wt.% Ni/δ-Al₂O₃ catalyst in the 623–743 K temperature range. The unreduced and reduced forms of the catalyst were characterized by ESEM–EDAX and X-ray diffraction (XRD). In the IPOX tests, the effects of steam to carbon ratio (S/C), carbon to oxygen ratio (C/O₂) and residence time (W/F (g_cat h/mol HC)) on the hydrogen production activity, selectivity and product distribution were studied in detail. The effect of temperature program applied (increasing from 623 to 743 K, ITP; decreasing from 743 to 623 K, DTP) during reaction was also tested. The results showed that the Pt–Ni bimetallic system has superior performance characteristics compared to the monometallic catalysts reported in literature. The reason is thought to be the utilization of the catalyst particles as micro heat exchangers during IPOX; the heat generated by Pt sites during exothermic total oxidation (TOX) being readily transferred through the catalyst particles acting as micro heat exchangers to the Ni sites, which promote endothermic steam reforming (SR). The optimal conditions were found as S/C = 3, C/O₂ = 2.70 and W/F = 0.51 g_cat h/mol HC for IPOX of propane on the basis of high hydrogen productivity and selectivity between 623 and 748 K for the experimental conditions tested. The thermo-neutral points obtained showed the sustainability of reaction in terms of energy.     

Prolymphocytic leukemia: diagnosis and treatment. A case report

A patient with B-cell prolymphocytic leukemia (PLL) who has had a prolonged survival is presented. The patient was diagnosed incidentally while asymptomatic, but later developed progressive disease. He was refractory to alkylating agents and fludarabine, but responded to treatment with cyclophosphamide, doxorubicin, vincristine, and prednisone. This patient's prolonged survival may be due partly to his diagnosis at an indolent phase, possibly representing the early phase of the natural course of the disease. Diagnosis, clinical course, and treatment options for PLL are discussed.     

Subsurface Characterization at Ground Failure Sites in Adapazari, Turkey

Ground failure in Adapazari, Turkey during the 1999 Kocaeli earthquake was severe. Hundreds of structures settled, slid, tilted, and collapsed due in part to liquefaction and ground softening. Ground failure was more severe adjacent to and under buildings. The soils that led to severe building damage were generally low plasticity silts. In this paper, the results of a comprehensive investigation of the soils of Adapazari, which included cone penetration test (CPT) profiles followed by borings with standard penetration tests (SPTs) and soil index tests, are presented. The effects of subsurface conditions on the occurrence of ground failure and its resulting effect on building performance are explored through representative case histories. CPT- and SPT-based liquefaction triggering procedures adequately identified soils that liquefied if the clay-size criterion of the Chinese criteria was disregarded. The CPT was able to identify thin seams of loose liquefiable silt, and the SPT (with retrieved samples) allowed for reliable evaluation of the liquefaction susceptibility of fine-grained soils. A well-documented database of in situ and index testing is now available for incorporating in future CPT- and SPT-based liquefaction triggering correlations.     

Growth and Characterization of YbBCO Films on Textured Gd2O3 Buffer-Layered Ni Tapes: All Sol–Gel Process

YbBa₂Cu₃O_7?x (YbBCO) thick films were grown on buffered, cube-textured Nickel tapes by sol–gel dip-coating method. Yb-123 films were prepared using solutions of Yb, Ba, and Cu organometallic compounds. A solution-based Gd₂O₃ buffer layer was deposited by dip-coating process with excellent texture and uniformity. The texture development and surface morphology of the buffer-layer films were examined by X-ray diffraction, pole figures, and ESEM analysis. Microstructure and characterization of Yb-123 films were done by ESEM, EDS, and XRD analysis. T _c and J _c were conducted by four-wire measurement method     

3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview

Recently, polyvinylidene fluoride (PVDF) based nanocomposites have attracted much attention for next-generation wearable applications such as promising piezoelectric energy harvesters (nanogenerators), energy storage devices, sensing devices, and biomedical devices due to their high flexibility, and high dielectric and piezoelectric properties. 3D printing technology, PVDF based piezoelectric nanocomposites, the studies based on 3D printing of PVDF based piezoelectric nanocomposites by inkjet printing and fused deposition modeling, and enhancements of energy harvesting and storage performance of nanocomposites by structural design are comprehensively overviewed here. An insight is provided into 3D printing techniques, structure and properties of PVDF based polymers, various nanofillers and production methods for nanocomposites, solutions to enhance β phase (crystallinity) of PVDF, and improvements of nanocomposites’ breakdown strength, discharged energy density, and piezoelectric power output by mentoring structural design.     

Maximization of total surface area of Pt-SnO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst by the Taguchi method

The maximization of the total surface area of Pt-SnO₂/Al₂O₃ catalyst was studied by using the Taguchi method of experimental design. The catalysts were prepared by sol-gel method. The effects of HNO₃, H₂O and aluminum nitrate concentrations and the stirring rate on the total surface area were studied at three levels of each. L₉ orthogonal array leading nine experiments was used in the experimental design. The parameter levels that give maximum total surface area were determined and experimentally verified. In the range of conditions studied it was found that, medium levels of HNO₃ and H₂O concentration and lower levels of aluminum nitrate concentration and stirring rate maximize the total surface area.     

Use of ultrasonic energy in reactive dyeing of cellulosic fabrics

The use of ultrasonic energy in dyeing cotton fabrics with monochlorotriazine and vinylsulphone reactive dyes has been studied spectrophotometrically. The dyeings carried out conventionally and by the use of ultrasonic techniques were compared in terms of percentage exhaustion, total amount of dye transferred to the washing bath after dyeing, fastness properties and colour values of the dyed materials. Overall results have shown that the use of ultrasound in reactive dyeing of cellulosic fabrics can result in energy savings, less water consumption, increased depth of colour and better process conditions.     

Friction and adsorption properties of normal and high-oleic soybean oils

The steel/steel boundary friction properties of soybean oil (SBO) and high-oleic soybean oil (HOSBO) are compared. HOSBO is significantly more saturated than SBO and more oxidatively stable. Changes in degree of unsaturation affect lateral interactions of adsorbate molecules, which in turn affects their adsorption and, hence, their boundary lubrication properties. To investigate this possibility, the free energies of adsorption (ΔG _ads) of SBO, HOSBO, and methyl laurate (ML) were determined from the analysis of friction-derived adsorption isotherms using the Langmuir and Temkin adsorption models. The results showed a stronger adsorption for the vegetable oils than for ML, an indication of multiple interactions between the ester groups of the triglycerides and the steel surface. The result also showed no difference in the ΔG _ads values of SBO and HOSBO obtained using either the Langmuir or Temkin models. This was interpreted as an indication of the lack of appreciable net lateral interaction between triglyceride adsorbates.     

πSynthesis and evaluation of a series of α-hydroxy ethers derived from isopropyl oleate

Several fatty derivatives with bulky moieties were prepared by treatment of epoxidized isopropyl oleate with a number of alcohols in the presence of sulfuric acid catalyst to provide a series of α-hydroxy ethers in good yield. The materials were analyzed for cold flow performance through cloud point and pour point determinations. The most promising α-hydroxy ether produced in this study, with respect to both low temperature behavior and economic criteria, was isopropyl 9(10)-(2-ethylhexoxy) 10(9)-hydroxystearate, which has a cloud point of −23°C and pour point of −24°C.