Chromatographic performance of monodisperse–macroporous particles produced by “modified seeded polymerization.” I: Effect of monomer/seed latex ratio

In this study, the monodisperse–macroporous particles produced by a relatively new polymerization protocol, the so‐called, “modified seeded polymerization,” were used as column‐packing material in the reversed phase chromatography (RPC) of proteins. The particles were synthesized in the form of styrene‐divinylbenzene copolymer approximately 7.5 μm in size. In the first stage of the synthesis, the monodisperse polystyrene particles 4.4 μm in size were obtained by dispersion polymerization and used as the “seed latex.” The seed particles were swollen by a low‐molecular‐weight organic agent and then by a monomer mixture. The monodisperse–macroporous particles were obtained by the polymerization of monomer mixture in the seed particles. In the proposed polymerization protocol, the number of successive swelling stages was reduced with respect to the present techniques by the use of sufficiently large particles with an appropriate average molecular weight as the seed latex. A series of particles with different porosity properties was obtained by varying the monomer/seed latex ratio. The separation behavior of HPLC columns including the produced particles as packing material was investigated in the RPC mode using a protein mixture including albumin, lysozyme, cytochrome c, and ribonuclease A. The chromatograms were obtained with different flow rates under an acetonitrile–water gradient. The theoretical plate number increased and chromatograms with higher resolutions were obtained with the particles produced by using a lower monomer/seed latex ratio. The separation ability of the column could be protected over a wide range of flow rates (i.e., 0.5–3 mL/min) with most of the materials tested. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 607–618, 2004     

Monodisperse‐porous poly(styrene‐co‐divinylbenzene) beads providing high column efficiency in reversed phase HPLC

A multistage polymerization protocol, the so‐called “modified seeded polymerization,” was developed for the production of monodisperse‐porous poly(styrene‐co‐divinylbenzene) providing high column efficiency as a packing material in reversed phase high performance liquid chromatography (RPLC). In the first stage of the multistage production, uniform polystyrene seed particles, produced by dispersion polymerization, were swollen by an organic agent (i.e., the diluent) and then by a monomer mixture containing styrene and divinylbenzene. The final porous particles were obtained in the monodisperse form by the polymerization of monomer mixture in the seed particles. By the use of a small size seed latex with low molecular weight and by the selection of the appropriate diluent, relatively small monodisperse‐porous particles with suitable pore structure could be achieved. In the reversed phase separation of alkylbenzenes, under isocratic conditions, theoretical plate numbers up to 40,000 plates/m were achieved by using 5.2 μm porous particles, obtained by a toluene‐dibutyl phthalate mixture as the diluent. No significant decrease in the resolution power was observed by the fourfold increase in the mobile phase flow rate. The column efficiency and the resolution observed with 5.2 μm monodisperse‐porous particles were significantly higher with respect to the currently available polymer based packing materials used in the reversed phase HPLC. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1430–1438, 2005     

Reusable water oxidation catalyst with dual active center for enhanced water oxidation: Iridium oxide nanoparticles immobilized on monodisperse-porous Mn5O8 microspheres

A reusable catalyst with dual active center for chemical water oxidation is synthesized for the first time by immobilization of iridium oxide nanoparticles (IrO₂ NPs) on monodisperse-porous manganese oxide microspheres acting both catalytic active center and support. Individual catalytic activity of manganese oxide microspheres is explained by multiple oxidation states of manganese which are capable of forming oxidative oxygen species. Monodisperse-porous microspheres in the form of Mn₅O₈, MnO₂ and Mn₂O₃ are used for synthesis of different catalysts and the highest activity in water oxidation is observed with the catalyst synthesized using Mn₅O₈ microspheres. The catalytic activity is correlated with the total Mn(II) and Mn(III) percentage of manganese oxide type selected for composite catalyst. The oxygen evolution up to 244 μmol is achieved in 30 min with the catalyst synthesized using Mn₅O₈ microspheres. Maximum TON and TOF numbers are obtained as 298 and 557 h^?1 with excellent reusability.     

Global optimization method for controlling a plant

A control system that contains a generic plant has been built. Its controller parameters have been designed by using a global search algorithm for a given plant, and its performance has been evaluated for the heat control of a thermal system, and the speed control of a DC motor. This paper explains this control system with a DC motor as its plant, the speed of which is controlled by the controller.     

A fast recursive solution for induction motor transients

A fast and accurate algorithm for determining induction-motor transient behavior is presented. The fast components of the stator transients are decoupled from the machine flux linkage equations by a linear transformation. The resulting differential equations are then solved by using recursive algebraic equations, which require considerably less computational effort than existing methods. An example shows that the method is very accurate and yet uses less than 40% of the CPU time required by the exact model. The method could be useful in studies that involve simultaneous responses of many machines, such as power system stability studies, where optimal computational efficiency is desirable     

Zero-Error Source–Channel Coding With Side Information

This correspondence presents a novel application of the theta function defined by Lovasz. The problem of coding for transmission of a source through a channel without error when the receiver has side information about the source is analyzed. Using properties of the Lovasz theta function, it is shown that separate source and channel coding is asymptotically suboptimal in general. By contrast, in the case of vanishingly small probability of error, separate source and channel coding is known to be asymptotically optimal. For the zero-error case, it is further shown that the joint coding gain can in fact be unbounded. Since separate coding simplifies code design and use, conditions on sources and channels for the optimality of separate coding are also derived     

Monodisperse poly(p-chloromethylstyrene) microbeads by dispersion polymerization

In this study, an alternative dispersion polymerization method for the para isomer of chloromethylstyrene was proposed. Highly monodisperse poly(p-chloro-methylstyrene) (PCMS) particles in the size range of 1.67–3.75 μm were obtained. The monodispersity and the isolation yield of PCMS particles were significantly improved relative to the methods available in the literature. Azobisisobutyronitrile and polyacrylic acid were selected as the initiator and the steric stabilizer, respectively, in the dispersion medium composed of ethanol and methoxyethanol. The results indicated that the particle size increased with increasing initiator concentration. An increase in the stabilizer concentration led to a decrease in the particle size. The methoxyethanol/ethanol ratio was found as one of the most important parameters controlling the average size and the size distribution. Contrary to the tendencies noted in the literature, the particle size decreased with increasing polymerization temperature.     

Supramolecular Assemblies Constructed by Cucurbituril-Catalyzed Click Reaction

Cucurbituril homologues are multi-functional macrocycles that can find applications in many areas and have numerous interesting features setting them apart from the other macrocycles. Among them, the ability of one of the cucurbituril homologues, cucurbit[6]uril (CB6), to catalyze 1,3-dipolar cycloaddition in a regiospecific fashion is truly exceptional. Using this feature, small molecules can be clicked together to form complex structures in a very efficient way. Accordingly, in this article we review recent research involving the use of CB6-catalyzed 1,3-dipolar cycloaddition or the click reaction of CB6 in the construction of supramolecular assemblies including rotaxanes, pseudorotaxanes, polyrotaxanes, polypseudorotaxanes, molecular switches, machines, and nanovalves.     

On error exponents in hypothesis testing

The classical result of Blahut, which characterizes achievable error exponents in binary hypothesis testing, is generalized in two different directions. First, in M-ary hypothesis testing, the tradeoff of all M(M-1) types of error exponents and corresponding optimal decision schemes are explored. Then, motivated by a power-constrained distributed detection scenario, binary hypothesis testing is revisited, and the tradeoff of power consumption versus error exponents is fully characterized. In the latter scenario, sensors are allowed to make random decisions as to whether they should remain silent and save power, or transmit and improve detection quality. It is then shown by an example that optimal sensor decisions may indeed be random