Study of Adsorption/Desorption Effect of 2-Mercaptobenzothiazole as Sweet Corrosion Inhibitor on API-5L X60 Steel

Protection of Metals and Physical Chemistry of Surfaces - In this study, the inhibitive performance of 2-mercaptobenzothiazole (2MBT) and 2-aminobenzothiazole (2ABT) were investigated on API-5L X60...     

Prediction of ultrasonic wave velocity in particleboard and fiberboard

Ultrasonic wave velocities were determined at parallel and perpendicular to manufacturing direction and at the interval angles of 15° in clockwise and counterclockwise directions of particleboard and fiberboard. The experimental results were compared with the predicted values using some empirical formulae such as Hankinson and Jacoby equations. The results showed that the ultrasonic wave velocity were the highest in parallel direction in particleboard and fiberboard and decreases with increase of angle and the lowest values occurred in perpendicular direction. The predicted ultrasonic velocity using Hankinson and Jacoby equations are in close agreement with the measured values. Relationship between ultrasonic wave velocities and particles and fibers angle could be successfully presented by cubic and quadratic regression equations as well.     

An adaptive tracking problem for a family of retarded time-delay plants

Most of the existing switching control techniques are developed specifically for finite-dimensional linear time-invariant (LTI) systems. In many practical applications, however, it is essential to take time delay into consideration in the modelling as the control system can be highly sensitive to delay. In this paper, a multi-model switching control algorithm is proposed for retarded time-delay systems. It is assumed that the plant is represented by a family of known multi-input multi-output, observable, LTI models with multiple delays in the states, and that corresponding to each model in the known family, there exists a high-performance finite-dimensional LTI controller. In addition, it is supposed that a bound on the magnitude of the external inputs and disturbances is available. It is then shown that the proposed switching controller can stabilize the uncertain system, and that under some mild conditions, output tracking can be achieved in the given problem setting. Copyright © 2007 John Wiley & Sons, Ltd.     

Robust Stabilizability Verification of Polynomially Uncertain LTI Systems

This paper investigates the stabilizability of uncertain linear time-invariant (LTI) systems via structurally constrained controllers. First, an LTI uncertain system is considered whose state-space matrices depend polynomially on the uncertainty vector, defined over some region. It is shown that if the system is stabilizable by a structurally constrained controller in one point belonging to the region, then it is stabilizable by a controller with the same structure in all points belonging to the region, except for those located on an algebraic variety. Thus, if a system is stabilizable via a constrained controller at the nominal point, then it is almost always stabilizable at any operating point around the nominal model. It is also shown how this algebraic variety (or the dominant subvariety of it) can be computed efficiently. The results obtained in this paper encompass a broad range of the existing results in the literature on robust stability of the LTI systems, in addition to new ones.     

A hermetic glass-silicon micropackage with high-density on-chipfeedthroughs for sensors and actuators

This paper describes the development of a hermetic micropackage with high-density on-chip feedthroughs for sensor and actuator applications. The packaging technique uses low-temperature (320°C) electrostatic bonding of a custom-made glass capsule (Corning 7740, 2×2×8 mm³) to fine grain polysilicon in order to form a hermetically sealed cavity. High-density on-chip multiple polysilicon feedthroughs (200 per millimeter) are used for connecting external sensors and actuators to the electronic circuitry inside the package. A high degree of planarity over feedthrough areas is obtained by using grid-shaped polysilicon feedthrough lines that are covered with phosphosilicate glass (PSG), which is subsequently reflown at 1100°C in steam for 2 h. Saline and DI water soak tests at elevated temperatures (85 and 95°C) were performed to determine the reliability of the package. Preliminary results have shown a mean time to failure (MTTF) of 284 days and 118 days at 85 and 95°C, respectively, in DI water. An Arrhenius diffusion model for moisture penetration yields an expected lifetime of 116 years at body temperature (37°C) for these packages. In vivo tests in guinea pigs and rats for periods ranging from one to two months have shown no sign of infection, inflammation, or tissue abnormality around the implanted package     

A potential trackable bone filler: Preparation and characterization

This study reported the synthesis of fluorescent hydroxyapatite/alginate/carbon quantum dots (HA/Alg/CQDs) nanocomposites via the co-precipitation technique. The N-doped CQDs as a new class of fluorescent materials were prepared by the citric acid pyrolysis method, with an average size around 4 nm. Physical, chemical, and optical properties of the synthesized nanocomposites were investigated by X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FTIR), atomic force microscopy (AFM), field-emission scanning electron microscopy (FESEM), UV–visible spectroscopy, and photoluminescence (PL) spectroscopy, respectively. The PL spectroscopy data verified the favorable in vitro luminescent emission of the HA/Alg/CQDs nanocomposites in comparison with HA/Alg and HA samples. The XRD patterns of the prepared samples confirmed the formation of crystalline HA in all composites, possessing a Ca/P ratio around 1.5 as obtained by EDX elemental analysis. The FESEM analysis exhibited HA nanoplates that homogeneously distributed throughout the alginate matrix. Therefore, the synthesized nanocomposites could be regarded as potential trackable drug carriers for hard tissue engineering applications.     

Long‐term water uptake behavior of natural fiber/polypropylene composites

Composites of different natural fibers and polypropylene were prepared and their long‐term water absorption behaviors were studied. Wood flour, rice hulls, newsprint fibers, and kenaf fibers (at 25 and 50% by weight contents) were mixed with polypropylene and 1 and 2% compatibilizer, respectively. Water absorption tests were carried out on injection‐molded specimens at room temperature for 5 weeks. Measurements were made every week and water absorption was calculated. Water diffusion coefficients were also calculated by evaluating the water absorption isotherms. Results indicated a significant difference among different natural fibers, with kenaf fibers and newsprint fibers exhibiting the highest and wood flour and rice hulls the lowest water absorption values, respectively. The difference between 25 and 50% fiber contents for all composite formulations increased at longer immersion times. Water diffusion coefficients of the composites were found to be about 3 orders of magnitude higher than that of pure PP. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Numerical and Experimental Study of an Under-Ground Water Reservoir,Cistern

This article presents experimental and numerical study of an under-ground water reservoir (cistern) during six months operation in a semi-arid region. The cistern with one dome, four windcatchers and a water reservoir is located in Lar, a hot arid city at south of Iran. Outdoor and indoor air temperature and humidity, water temperature in three depths and dome surface temperature were measured using a data logging system. The results show that the average air humidity inside the cistern was almost constant during the experiments but its slight variation during a day follows inside air temperature changes. The inside air temperature was always lower than the ambient temperature and inside and outside average air temperature difference was about 6 °C. The difference was slightly higher in the hot seasons. The water reservoir was also modeled in 2D, axisymmetric and quasi steady numerical simulation for six months of operation. Highly stratified water temperature distribution was observed in the numerical results as well as the experimental measurements.     

Mechanical properties of composites from sawdust and recycled plastics

Mechanical properties of wood plastic composites (WPCs) manufactured from sawdust and virgin and/or recycled plastics, namely high density polyethylene (HDPE) and polypropylene (PP), were studied. Sawdust was prepared from beech industrial sawdust by screening to the desired particle size and was mixed with different virgin or recycled plastics at 50% by weight fiber loading. The mixed materials were then compression molded into panels. Flexural and tensile properties and impact strength of the manufactured WPCs were determined according to the relevant standard specifications. Although composites containing PP (virgin and recycled) exhibited higher stiffness and strength than those made from HDPE (virgin and recycled), they had lower unnotched impact strengths. Mechanical properties of specimens containing recycled plastics (HDPE and PP) were statistically similar and comparable to those of composites made from virgin plastics. This was considered as a possibility to expand the use of recycled plastics in the manufacture of WPCs. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3641–3645, 2006