Control strategies for reactive batch distillation

A batch reactor may be combined directly with a distillation column by distilling off the light component product in order to increase the reactor temperature or to improve the product yield of an equilibrium reaction. The same amount of the light product should be removed as the amount being formed by the reaction at any time. A linearized model has been developed which describes the process behaviour satisfactorily for control analysis purposes. The controllability of a combined batch reactor/batch distillation column is found to depend strongly on the operating conditions and on the time during the run. In general, controlling only the reactor temperature (one-point bottom control) is difficult since the set-point has to be specified below a maximum value in order to avoid break-through of an intermediate component in the ditillate. This maximum value may be difficult to know a priori. For the example considered in this study, control of both reactor temperature and distillate composition (two-point control) is also found to be difficult due to large interactions in the column. As with one-point bottom control, the reactor temperature has to be specified below a maximum value. However, energy can be saved since the heat duty can be decreased with time. Controlling the temperature on a tray in the column (one-point column control) is found to give good performance for the given process with no loss of reactant and a high reactor temperature, although no direct control of the reactor temperature is obtained.     

Age-related changes in cognitive ERPs of attenuation

The purpose of this article is to deliberate the moral and legal dilemma entailed in the weapon of the labour strike as a pressure tactic on the Israeli Finance Ministry regarding job slots, budgets and, in effect, violating the collective agreement signed by the nurses and impairing patients' treatment, as opposed to refraining from striking and suffering the heavy burden of work, the lack of trained personnel, low wages, and the inability to give patients proper, high quality treatment.     

Recovering spectral data from natural scenes with an RGB digital camera and colored filters

Many spectral‐recovery methods using RGB digital cameras assume the underlying smoothness of illuminant and reflectance spectra, and apply low‐dimensional linear models. The aim of the present work was to test whether a direct‐mapping method could be used instead of a linear‐models approach to recover spectral radiances and reflectances from natural scenes with an RGB digital camera and colored filters. In computer simulations, a conventional RGB digital camera with up to three colored filters was used to image scenes drawn from a hyperspectral image database. Three measures were used to evaluate recovery with the direct‐mapping method: goodness‐of‐fit, root‐mean‐square error, and a color‐difference metric. It was found that with two and three filters both spectral radiances and reflectances could be recovered sufficiently accurately for many practical applications. With little increase in computational complexity, an RGB camera and a few colored filters can provide significantly better recovery of natural scenes than an RGB camera alone. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 352–360, 2007     

Strawberry juice colour: The effect of some processing variables on the stability of anthocyanins

The colour stability of juice and purées made from a mixture of two strawberry varieties, stored at + 20°C or at –20°C under aerobic and anaerobic conditions, was studied. High-performance liquid chromatography and spectrophotometric analysis were used to monitor the changes in colour during storage. Pelargonidin 3-glucoside comprised 80% of the total anthocyanin content. Four other pelargonidin-based peaks were found, being 10.4%, 3.5%, 0.7% and 0.3% of the total and two cyanidin peaks were present, being 3.3% and 0.4% of the total. Clarification before storage caused considerable losses in the initial anthocyanin concentrations. Storage conditions (air versus nitrogen) did not influence the rate of loss of anthocyanins during storage or the formation of polymeric pigments. There were no losses in anthocyanins and no increase in the amount of colour measured at 510 nm due to polymers in samples stored at–20°C. Polymerisation occurred in the samples stored at + 20°C, especially in the clarified samples.     

Positive and Negative Emotional Feelings and Behaviors in Mother-Daughter Ties in Late Life.

Behaviors and emotions during specific visits may reveal the interpersonal processes of mother-daughter ties, yet most research uses global assessments of these ties. Forty-eight mother-daughter pairs participated in audiotaped conversations and completed surveys. All mothers were over age 70 and in good health. Daughters tended to take a central role in structuring the conversations. Conversations were characterized by high levels of felt and expressed positive emotions and behaviors for mothers and daughters. Nevertheless, mothers reported more positive and fewer negative emotions, whereas daughters expressed more positive behaviors than did mothers. Mothers' positive feelings and behaviors were associated with daughters'. Finally, mothers' and daughters' emotions and behaviors were associated with their destructive responses to being upset with each other, providing support for the ambivalence perspective of parent-offspring relationships. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Performance evaluation of a biotrickling filter degrading mixtures of hydrophobic and hydrophilic compounds

The removal of a mixture of painting solvents from waste air using a biofiltration process was evaluated in this project. The pollutants removed included hydrophobic (aromatic hydrocarbons) and hydrophilic (water soluble ketones and esters) compounds. A trickle bed reactor with a defined immobilized mixed culture on polyethylene Pall rings was utilized in this biodegradation study. The removal efficiencies (RE) of the individual groups of pollutants during loading experiments were determined. An increase of the aromatic hydrocarbons loading resulted in a drop of their RE_AROM with no effect on the RE value of ketones. The overloading of ketones caused a rapid drop in RE_AROM and a small drop in RE_KET. To achieve a restoration of the biocatalyst degradation properties after the increase in loading, an addition of phosphate to the aqueous medium was implemented which successfully restored the removal efficiency.     

Product and by-product formation in laboratory studies on disinfection electrolysis of water using boron-doped diamond anodes

Boron-doped diamond (BDD) electrodes were studied with respect to the formation of inorganic by-products in water electrolysis. Experiments in non-divided cells were performed with systems containing sulphate, chloride, chlorite, chlorate and nitrate ions. Discontinuous experiments in thermostated cells with rotating disk diamond anodes and expanded mesh IrO₂ cathodes were carried out at 20 °C. Current density was varied between 50 and 300 A m⁻². Ion chromatography was mainly used for species detection.

It was not possible to demonstrate the decomposition of sulphate although a slight tendency seems to exist in some experiments. Hydrogen peroxide is one of the anodic and cathodic by-products. Active chlorine is detectable at higher chloride concentrations compared with the use of mixed oxide anodes (MIO). One reason for this is the reaction of formed chlorine with ozone or hydrogen peroxide. Chlorate can be formed electrolysing chloride, hypochlorite and chlorite solutions. Perchlorate formation was detected. Cathodic processes are responsible for the formation of nitrite ions and ammonia. If chlorine is present, the formation of monochloramine is one possible side reaction. Results show that the processes are very complex. Reaction spectra may vary from case to case. Perchlorate formation is a high risk in drinking water treatment.     

FE3 EPR investigation of PLZT 1/65/35 and 8/65/35

X-band EPR spectra of PLZT 1/65/35 and PLZT 8/65/35 doped with 1% FE³⁺ were recorded at temperature range -175°C to 200°C. Three types of paramagnetic centers were found. Two of them are in strong axial and rhombic crystal field due to neighboring oxygen and lead vacancies. The other center has symmetry determined by polarization and oxygen octahedra tilt. EPR spectra of PLZT 8/65/35 are in agreement with its glassy behavior.     

Twinning of YBa2Cu3O7 thin films on different substrates

The twinning of YBa₂Cu₃O₇ (YBCO) thin films with c-axis orientation on (001) MgO, (001) SrTiO₃, (012) LaAlO₃, (110) NdGaO₃ and (001) NdGaO₃ substrates, prepared by laser ablation, has been examined using a combination of and θ/2θ scans at a four-circle diffractometer. On all substrates, except for (001) NdGaO₃, the tetragonal to orthorhombal phase transition results in four different orientations of YBCO twins relating to the substrate. On (001) NdGaO₃ only two different twin orientations, accompanied by a slight lattice monoclinization, has been observed.