Geopolymer assembly by emulsion templating: Emulsion stability and hardening mechanisms

This work investigates emulsion templating to synthesize hexadecane oil/geopolymer composites. In a system with hexadecane as the internal (dispersed) phase and an alkali activated continuous phase without added surfactant, adding aluminosilicate clay particles does not increase resistance against creaming or coalescence, while adding a surfactant (L35 or CTAB) stabilizes the solid-liquid interface. Infrared studies and rheological studies of the associated geopolymerization determined that the presence of the organic phase or surfactant has no significant effect on the geopolymerization kinetics, as determined by the change in time of the Si-O-T IR stretching frequency and the rheological moduli involved during the process. The stabilization of the organic template is reminiscent of Pickering emulsion even though we employ a much greater amount of inorganic material for geopolymer formation. Although the addition of surfactant has a significant effect on the behavior of the paste, the percolation of the network remains unmodified, highlighting the fact that the phenomenon is not dependent on viscosity. Finally, rheological measurements were used to obtain the mass fractal dimension of the as-made gel network, which is able to differentiate the interfacial effect between surfactant molecules with a slightly denser interphase when a cationic surfactant is used.     

Making polyurethane foams from microemulsions

A remarkable correlation exists between the degree of expansion of polyurethane foams and the structure of the reacting premixes. Polyurethane foams obtained from reacting premixes containing microemulsions are highly expanded. The expansion rate is proportional to the volume fraction of microemulsion in the premix. The stability of premixes with and without microemulsion is completely different suggesting distinct creaming mechanisms. We apply this idea to synthesize polyurethane foams from microemulsions successfully. This approach can be used to rationalize the design of polyurethane formulations leading to highly expanded foams.     

Molecular structure and stereoelectronic properties of sarmazenil--a weak inverse agonist at the omega modulatory sites (benzodiazepine receptors): comparison with bretazenil and flumazenil

X-ray diffraction and ab initio MO theoretical calculations were used in order to investigate the structural and electronic properties of sarmazenil, a weak inverse agonist at the omega modulatory sites (benzodiazepine receptors). This compound was compared to bretazenil, a partial agonist, and to the antagonist flumazenil on the basis of structural and electronic data. The conformational and theoretical properties (interatomic pi overlap populations, molecular electrostatic potential (MEP), the topology of frontier orbitals, and proton affinity) of these three imidazobenzodiazepinones were determined in order to analyse the stereoelectronic properties in relation with their distinct intrinsic efficacies at the omega modulatory sites.     

Peritoneal healing after fibrin glue application: a comparative study in a rat model

The influence of fibrin glue on adhesion formation and peritoneal healing is evaluated in a prospective, randomized, controlled study. In all, 20 Wistar rats underwent microsurgical suturing of two silicone sheets, one covered with a fibrin glue barrier, to the anterior peritoneum. Each animal thus served as its own control. After 10 days, adhesions and peritoneal healing were evaluated by a blinded observer through a second-look laparotomy. Adhesions were scored using a modification of the classification of Diamond. Tissue around the silicone sheet was examined histologically and by scanning electron microscopy to evaluate the inflammatory reaction and peritoneal healing (ingrowth of blood vessels and quality of peritoneal cells). Adhesion scores for treated and control sides were (mean +/- SD) 2.89 +/- 4.68 and 6.79 +/- 9.09 (P = 0.181) respectively, and the percentage of the sheet covered by peritoneum was 26.25 +/- 31.50 and 29.21 +/- 40.21 (P = 0.226) respectively. Using the paired Wilcoxon rank test, the P values for the ingrowth of blood vessels and peritoneal healing evaluated by histology and scanning electron microscopy were 0.842, 0.692 and 0.695 respectively. We conclude that although the mean adhesion score was reduced by > 50% by fibrin glue, there is no statistically significant difference concerning adhesion formation or peritoneal healing with the use of fibrin glue.     

Jitter in ATM networks and its impact on peak rate enforcement

Cells arriving to an ATM network experience random delays due to queueing in upstream multiplexing stages, notably in customer premises. This is the phenomenon of jitter and the aim of the present paper is to study its influence on peak rate enforcement. We first introduce some general characterizations of jitter and then, describe two models of jittered flows based on simple queueing systems. We discuss the objectives of peak rate enforcement and study the impact of jitter on the dimensioning of jumping window and leaky bucket mechanisms. A useful synthetic characterization of jitter appears to be a remote quantile of the cell delay distribution expressed in units of the initial inter-cell interval.     

Shear mode coupling and tilted grain growth of A1N thin films in BAW resonators.

Polycrystalline A1N thin films were deposited by RF reactive magnetron sputtering on Pt(111)/Ti electrode films. The substrates were tilted by an angle ranging from 40 degrees to 70 degrees with respect to the target normal. A low deposition temperature and a high sputter gas pressure were found ideal for tilted growth. The resulting grain tilt angle amounts to about half the substrate tilt angle. For coupling evaluation, 5 GHz solidly mounted resonator structures have been realized. The tilted grain A1N films exhibited a permittivity in the 9.5-10.5 range and loss tangent of 0.3%. Two shear modes as well as the longitudinal mode could be clearly identified. The coupling coefficient k2(eff) of the fundamental thickness shear mode (TS0) was found to be about 0.5%, which is compatible with a c-axis tilt of about 6 degrees.     

Clinical case of the month. Metastatic endocarditis: clinical observation and review of the literature

The authors describe a case of metastatic endocarditis associated with a gastric carcinoma. The diagnosis was made early and the treatment by surgery and chemotherapy allowed a survival of 18 months, which is unusually long. The differential diagnosis is discussed and includes nonbacterial thrombotic endocarditis, infectious endocarditis and primary tumors of the heart.     

Fabrication of a biocompatible flexible electroosmosis micropump

In in-vivo microsystems, one of the components is a biocompatible micropump in order to produce the necessary force to deliver the fluid from the inlet to the outlet. In this contribution, a flexible micropump is fabricated which is aimed to be suitable in drug delivery applications. It provides high degree of biocompatibility, since the only employed materials are implantation grade polydimethylsiloxane elastomer and gold for the electrical interconnects. The working principle of the micropump is based on transverse DC electroosmosis which is a new variant of conventionally applied high voltage DC electroosmosis. This new technique is based on topography irregularities introduced in the channel resulting in a non-uniform charge distribution. The advantage is to drive the micropump using a relatively low DC voltage of 10 V while getting an effective flow speed of 60 μm/s. In order to characterize the flow speed, dyed 3 μm beads are dispersed in the working fluid and their speed is measured by the line scanning technique using a confocal microscope. It is also observed that the flow has a helical profile which is an attractive feature for an efficient micro-mixer in active microfluidics and μ-TAS applications.     

P2Y11 Agonism Prevents Hypoxia/Reoxygenation- and Angiotensin II-Induced Vascular Dysfunction and Intimal Hyperplasia Development

Vascular dysfunction in cardiovascular diseases includes vasomotor response impairments, endothelial cells (ECs) activation, and smooth muscle cells (SMCs) proliferation and migration to the intima. This results in intimal hyperplasia and vessel failure. We previously reported that activation of the P2Y11 receptor (P2Y11R) in human dendritic cells, cardiofibroblasts and cardiomyocytes was protective against hypoxia/reoxygenation (HR) lesions. In this study, we investigated the role of P2Y11R signaling in vascular dysfunction. P2Y11R activity was modulated using its pharmacological agonist NF546 and antagonist NF340. Rat aortic rings were exposed to angiotensin II (AngII) and evaluated for their vasomotor response. The P2Y11R agonist NF546 reduced AngII-induced vascular dysfunction by promoting EC-dependent vasorelaxation, through an increased nitric oxide (NO) bioavailability and reduced AngII-induced H₂O₂ release; these effects were prevented by the use of the P2Y11R antagonist NF340. Human vascular SMCs and ECs were subjected to AngII or H/R simulation in vitro. P2Y11R agonist modulated vasoactive factors in human ECs, that is, endothelial nitric oxide synthase (eNOS) and endothelin-1, reduced SMC proliferation and prevented the switch towards a synthetic phenotype. H/R and AngII increased ECs secretome-induced SMC proliferation, an effect prevented by P2Y11R activation. Thus, our data suggest that P2Y11R activation may protect blood vessels from HR-/AngII-induced injury and reduce vascular dysfunctions. These results open the way for new vasculoprotective interventions.