Fundamental parameters affecting electrospinning of PAN nanofibers as uniaxially aligned fibers

Electrospinning with a collector consisting of two pieces of electrically conductive substrates separated by a gap has been used to prepare uniaxially aligned PAN nanofibers. Solution of 15 wt % of PAN/DMF was used tentatively for electrospinning. The effects of width of the gap and applied voltage on degree of alignment were investigated using image‐processing technique by Fourier power spectrum method. The electrospinning conditions that gave the best alignment of nanofibers for 10–15 wt % solution concentrations were experimentally obtained. Bundles like multifilament yarns of uniaxially aligned nanofibers were prepared using a new simple method. After‐treatments of these bundles were carried out in boiling water under tension. A comparison was made between the crystallinity and mechanical behavior of posttreated and untreated bundles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4350–4357, 2006     

Preparation and Characterization of Magnetite–Chitosan Nanoparticles and Evaluation of Their Cytotoxicity Effects on MCF7 and Fibroblast Cells

Nowadays, magnetic nanoparticles play a key role in drug treatment. However, if they are uncoated, they might aggregate and cause embolism in drug delivery. To avoid this, they are generally coated with polymers. In this investigation, magnetic nanoparticles (MNPs) were coated with chitosan through in situ co-precipitation process and their properties in addition to their cytotoxicity in MCF7 and fibroblast cells were analyzed. The results showed MNPs–chitosan nanoparticles would contain an average mean diameter of 32 nm and a saturation magnetization (M _S) value of 38.87 emu/g. To characterize the synthesized nanoparticles in terms of structural, morphological and magnetic properties, Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA) and vibrating sample magnetometry (VSM) studies were used. Toxicity test was also done to investigate whether their presence would cause any toxicity in the body; in addition, antibacterial assay was done to analyze if nanoparticles could be used as an antimicrobial agent.     

Surface characterization and biological properties of regular dentin,demineralized dentin,and deproteinized dentin

Bone autografts are often used for reconstruction of bone defects; however, due to the limitations of autografts, researchers have been in search of bone substitutes. Dentin is of particular interest for this purpose due to high similarity to bone. This in vitro study sought to assess the surface characteristics and biological properties of dentin samples prepared with different treatments. This study was conducted on regular (RD), demineralized (DemD), and deproteinized (DepD) dentin samples. X-ray diffraction and Fourier transform infrared spectroscopy were used for surface characterization. Samples were immersed in simulated body fluid, and their bioactivity was evaluated under a scanning electron microscope. The methyl thiazol tetrazolium assay, scanning electron microscope analysis and quantitative real-time polymerase chain reaction were performed, respectively to assess viability/proliferation, adhesion/morphology and osteoblast differentiation of cultured human dental pulp stem cells on dentin powders. Of the three dentin samples, DepD showed the highest and RD showed the lowest rate of formation and deposition of hydroxyapatite crystals. Although, the difference in superficial apatite was not significant among samples, functional groups on the surface, however, were more distinct on DepD. At four weeks, hydroxyapatite deposits were noted as needle-shaped accumulations on DemD sample and numerous hexagonal HA deposit masses were seen, covering the surface of DepD. The methyl thiazol tetrazolium, scanning electron microscope, and quantitative real-time polymerase chain reaction analyses during the 10-day cell culture on dentin powders showed the highest cell adhesion and viability and rapid differentiation in DepD. Based on the parameters evaluated in this in vitro study, DepD showed high rate of formation/deposition of hydroxyapatite crystals and adhesion/viability/osteogenic differentiation of human dental pulp stem cells, which may support its osteoinductive/osteoconductive potential for bone regeneration.     

Homotopy perturbation method for motion of a spherical solid particle in plane couette fluid flow

He’s homotopy perturbation method is applied to obtain exact analytical solutions for the motion of a spherical particle in a plane couette flow. It is demonstrated that the applied analytical method is very straightforward in comparison with existing techniques. Furthermore, it is decidedly effectual in terms of accuracy and rapid convergence. The formulation of the problem is presented in the text as well as the analytical and numerical procedures. The current results can be used in different areas of particulate flows.     

Modeling the hollow cylindrical piezo-ceramics with axial polarization using equivalent electro-mechanical admittance matrix

Modeling a piezo-ceramics as an electro-mechanical element is usually done using the laws of electricity. Due to complexity of the derived circuits, this kind of modeling usually results in some simplifications. In this paper using the force–velocity boundary conditions and equalizing the mechanical elements to the electrical ones, the governing equations of a hollow cylindrical piezo-ceramics with axial polarization are solved. Then the equivalent electro-mechanical impedance is represented via matrix notation. Using the matrix algebra the resonance and anti-resonance frequencies are calculated and then compared to the experimental results. The proposed method does not need to any simplification in circuit analysis, and provides the capability of modeling the various layers of piezo-ceramics and metals together in electro-acoustical transducers.     

An optical solution to the 3-SAT problem using wavelength based selectors

In this paper, an optical wavelength-based method to solve a well-known NP-complete problem 3-SAT is provided. In the 3-SAT problem, a formula F in the form of conjunction of some clauses over Boolean variables is given and the question is to find if F is satisfiable or not. The provided method uses exponential number of different wavelengths in a light ray and considers each group of wavelengths as a possible value-assignment for the variables. It then uses optical devices to drop wavelengths not satisfying F from the light ray. At the end, remaining wavelengths indicate satisfiability of the formula. The method provides two ways to arrange the optical devices to select satisfying wavelengths for a given clause: simple clause selectors and combined clause selectors, both requiring exponential preprocessing time. After preprocessing phase, the provided method requires polynomial time and optical devices to solve each problem instance.     

Design of a low cross‐talk micro‐coil array for micro‐scale MRI

Design of magnetic resonance micro‐coil arrays with low cross‐talk among the coils can be the main challenge to improve the effectiveness of magnetic resonance micro‐imaging because the electrical cross‐talk which is mainly due to the inductive coupling perturbs the sensitivity profile of the array and causes image artifacts. In this work, a capacitive decoupling network with N(M ? 1) + (N ? 1)(M ? 2) capacitors is proposed to reduce the inductive coupling in an N × M array. A 3 × 3 array of optimized micro‐coils is designed using the finite element simulations and all the needed elements for the array equivalent circuit are extracted in order to evaluate the effectiveness of the proposed decoupling method by assessing the reduction of the coupled signals after employing the capacitive network on the circuit. The achieved results for the designed array show that the high cross‐talk level is reduced by the factor of 2.2–3.4 after employing the capacitive network. By employing this method of decoupling, the adjacent coils in each row and inner columns can be decoupled properly while the minimum decoupling belongs to the outer columns because of the lack of all necessary decoupling capacitances for these columns. The main advantages of the proposed decoupling method are its efficiency and design easiness which facilitates the design of dense arrays with the properly decoupled coils, especially the inner coils which are more coupled due to their neighbors. © 2013 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 23, 353–359, 2013     

Hydrophilicity improvement of silicone rubber by interpenetrating polymer network formation in the proximal layer of polymer surface

A novel method composed of an interpenetrating polymer network (IPN) formation reaction in aqueous solution was developed to improve the hydrophilicity of silicone rubber (SR) substrate. This solution phase method is compatible, simple, and convenient for some sensitive biomedical applications of SR devices because of using water as reaction solvent instead of harmful chemicals. In this work, a sequential interpenetrating polymer network formation in the proximal layer of SR surface, using poly(2-hydroxyethyl methacrylate) (PHEMA), as the second network was conducted so that led to actually surface modification resulting in an improved hydrophilicity. The modified surfaces were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), contact angle measurement, atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS) to assess the wettability, chemical composition and morphology of the surface modified PDMS. The results indicated that the surface modification method offered a novel and facile approach to improve the hydrophilicity of SR without altering its bulk properties. This method could be suitable for biomedical applications because of using water as a monomer solvent and polymerization medium.