Flavonoids of “La Alcarria” honey A study of their botanical origin

Summary The flavonoids present in ten selected samples of La Alcarria honey with different pollen compositions have been HPLC analysed in order to establish if correlations between botanical origin and flavonoid profiles are possible. A common flavonoid pattern is observed in the different samples showing that pollen is not the main source of honey flavonoids. A close correlation between the flavonoid patterns of honey flavonoids and propolis flavonoids has been found suggesting that flavonoid analysis could be more useful in geographical origin determinations than in botanical origin studies.

---

Flavonoide des La-Alcarria-Honigs Eine Studie ihres botanischen Ursprungs

Zusammenfassung Die Flavonoide in Proben in Alcarria-Honig mit unterschiedlicher Pollenzusammensetzung wurden untersucht, um Kortrelationen zwischen dem botanischen Ursprung und den möglichen Flavonoiden zu finden. In den verschiedenen Proben wurde ein Flavonoid-Muster gefunden, wobei der Pollen nicht die Hauptquelle der Honigflavonoide ist. Es wurde jedoch eine enge Korrelation zwischen den Flavonoid-Mustern des Honigs und des Bienenkittharzes gefunden, was für die geographische Herkunft wichtiger ist als die botanische.

     

Fate of Calcium Chloride Dissolved in Concrete Mix Water

The extent to which chloride ion incorporated in portland cement concrete as calcium chloride accelerator at the usual treatment levels remains dissolved in the pore solution was investigated. This was examined by direct analysis of pore solutions expressed from cement pastes. The chloride ion concentration of the pore solution remains high during the first day of hydration and only gradually declines. It appears that appreciable concentrations of chloride ion likely remain in solution indefinitely .     

Turbulent premixed flame model based on a recent dispersion model

A model of turbulent premixed combustion is formulated based on a recent dispersion model and on earlier flame models. The dispersion model accounts for the effect of velocity correlation on turbulent dispersion without using parameters that are explicitly dependent on time or space. The earlier flame models are used as a basis for formulating an appropriate chemical source term. The resulting model is more general than the earlier models.The proposed model and one of the earlier models are validated against various experimental flames. It is shown that the proposed model is more accurate and requires less calibration. Furthermore, the proposed model is tested successfully against general criteria for premixed combustion modeling formulated in earlier works. It is therefore concluded that the dispersion model is a useful tool for premixed combustion modeling.     

Non-Gaussian Model for Ringing Phenomena in Offshore Structures

Significant interest has been shown in identifying the nonlinear mechanisms that induce a ringing type response in offshore structural systems. This high frequency transient type response has been observed in offshore systems, particularly in tension leg platforms (TLPs). Given the implications of this behavior on the fatigue life of TLP tendons, it is essential that ringing be considered in the overall response evaluation. This study presents two non-Gaussian probabilistic models of nonlinear viscous hydrodynamic wave forces that induce ringing. The response of a single-degree-of-freedom system exposed to these non-Gaussian wave force models is then evaluated using analytical and numerical studies based on the It? differentiation rule and the Monte Carlo simulation procedure, respectively. The results demonstrate that the proposed models induce ringing type response in a simplified structure. This study provides a probabilistic framework for modeling ringing type phenomenon which will serve as a building block for more refined hydrodynamic load models.     

SARS-CoV-2 Infection Dysregulates Cilia and Basal Cell Homeostasis in the Respiratory Epithelium of Hamsters

Similar to many other respiratory viruses, SARS-CoV-2 targets the ciliated cells of the respiratory epithelium and compromises mucociliary clearance, thereby facilitating spread to the lungs and paving the way for secondary infections. A detailed understanding of mechanism involved in ciliary loss and subsequent regeneration is crucial to assess the possible long-term consequences of COVID-19. The aim of this study was to characterize the sequence of histological and ultrastructural changes observed in the ciliated epithelium during and after SARS-CoV-2 infection in the golden Syrian hamster model. We show that acute infection induces a severe, transient loss of cilia, which is, at least in part, caused by cilia internalization. Internalized cilia colocalize with membrane invaginations, facilitating virus entry into the cell. Infection also results in a progressive decline in cells expressing the regulator of ciliogenesis FOXJ1, which persists beyond virus clearance and the termination of inflammatory changes. Ciliary loss triggers the mobilization of p73⁺ and CK14⁺ basal cells, which ceases after regeneration of the cilia. Although ciliation is restored after two weeks despite the lack of FOXJ1, an increased frequency of cilia with ultrastructural alterations indicative of secondary ciliary dyskinesia is observed. In summary, the work provides new insights into SARS-CoV-2 pathogenesis and expands our understanding of virally induced damage to defense mechanisms in the conducting airways.     

Primary Aldosteronism and Resistant Hypertension: A Pathophysiological Insight

Primary aldosteronism (PA) is a pathological condition characterized by an excessive aldosterone secretion; once thought to be rare, PA is now recognized as the most common cause of secondary hypertension. Its prevalence increases with the severity of hypertension, reaching up to 29.1% in patients with resistant hypertension (RH). Both PA and RH are “high-risk phenotypes”, associated with increased cardiovascular morbidity and mortality compared to non-PA and non-RH patients. Aldosterone excess, as occurs in PA, can contribute to the development of a RH phenotype through several mechanisms. First, inappropriate aldosterone levels with respect to the hydro-electrolytic status of the individual can cause salt retention and volume expansion by inducing sodium and water reabsorption in the kidney. Moreover, a growing body of evidence has highlighted the detrimental consequences of “non-classical” effects of aldosterone in several target tissues. Aldosterone-induced vascular remodeling, sympathetic overactivity, insulin resistance, and adipose tissue dysfunction can further contribute to the worsening of arterial hypertension and to the development of drug-resistance. In addition, the pro-oxidative, pro-fibrotic, and pro-inflammatory effects of aldosterone may aggravate end-organ damage, thereby perpetuating a vicious cycle that eventually leads to a more severe hypertensive phenotype. Finally, neither the pathophysiological mechanisms mediating aldosterone-driven blood pressure rise, nor those mediating aldosterone-driven end-organ damage, are specifically blocked by standard first-line anti-hypertensive drugs, which might further account for the drug-resistant phenotype that frequently characterizes PA patients.     

Highly Stable Colloidal “Giant” Quantum Dots Sensitized Solar Cells

Colloidal quantum dots (QDs) are widely studied due to their promising optoelectronic properties. This study explores the application of specially designed and synthesized “giant” core/shell CdSe/(CdS)_x QDs with variable CdS shell thickness, while keeping the core size at 1.65 nm, as a highly efficient and stable light harvester for QD sensitized solar cells (QDSCs). The comparative study demonstrates that the photovoltaic performance of QDSCs can be significantly enhanced by optimizing the CdS shell thickness. The highest photoconversion efficiency (PCE) of 3.01% is obtained at optimum CdS shell thickness ≈1.96 nm. To further improve the PCE and fully highlight the effect of core/shell QDs interface engineering, a CdSe_x S_1?x interfacial alloyed layer is introduced between CdSe core and CdS shell. The resulting alloyed CdSe/(CdSe_x S_1?x )₅/(CdS)₁ core/shell QD‐based QDSCs yield a maximum PCE of 6.86%, thanks to favorable stepwise electronic band alignment and improved electron transfer rate with the incorporation of CdSe_x S_1?x interfacial layer with respect to CdSe/(CdS)₆ core/shell. In addition, QDSCs based on “giant” core/CdS‐shell or alloyed core/shell QDs exhibit excellent long‐term stability with respect to bare CdSe‐based QDSCs. The giant core/shell QDs interface engineering methodology offers a new path to improve PCE and the long‐term stability of liquid junction QDSCs.     

A New Design Paradigm for Smart Windows: Photocurable Polymers for Quasi‐Solid Photoelectrochromic Devices with Excellent Long‐Term Stability under Real Outdoor Operating Conditions

A new photoelectrochromic device (PECD) is presented in this work proposing the combination of a WO₃‐based electrochromic device (ECD) and a polymer‐based dye‐sensitized solar cell (DSSC). In the newly designed architecture, a photocurable polymeric membrane is employed as quasi‐solid electrolyte for both the ECD and the DSSC. In addition, a photocurable fluoropolymeric system is incorporated as solution‐processable external protective thin coating film with easy‐cleaning and UV‐shielding functionalities. Such new polymer‐based device assembly is characterized by excellent device operation with improved photocoloration efficiency and switching ability compared with analogous PECDs based on standard liquid electrolyte systems. In addition, long‐term (>2100 h) stability tests under continuous exposure to real outdoor conditions reveal the remarkable performance stability of this new quasi‐solid PECD system, attributed to the protective action of the photocurable fluorinated coating that effectively prevents photochemical and physical degradation of the PECD components during operation. This first example of quasi‐solid PECD systems paves the way for a new generation of thermally, electrochemically, and photochemically stable polymer‐based PECDs, and provides for the first time a clear demonstration of their true potential as readily upscalable smart window components for energy‐saving buildings.