A cost effective approach to design of energy efficient residential buildings

The objective of this study is to identify cost-optimal efficiency packages at several levels of building energy savings.A two-story residential building locate...     

Trans-differentiation of human adipose-derived mesenchymal stem cells into cardiomyocyte-like cells on decellularized bovine myocardial extracellular matrix-based films

In this study, we aimed at fabricating decellularized bovine myocardial extracellular matrix-based films (dMEbF) for cardiac tissue engineering (CTE). The decellularization process was carried out utilizing four consecutive stages including hypotonic treatment, detergent treatment, enzymatic digestion and decontamination, respectively. In order to fabricate the dMEbF, dBM were digested with pepsin and gelation process was conducted. dMEbF were then crosslinked with N-hydroxysuccinimide/1-Ethyl-3-(3-dimethylaminopropyl)-carbodiimide (NHS/EDC) to increase their durability. Nuclear contents of native BM and decellularized BM (dBM) tissues were determined with DNA content analysis and agarose-gel electrophoresis. Cell viability on dMEbF for 3rd, 7th, and 14th days was assessed by MTT assay. Cell attachment on dMEbF was also studied by scanning electron microscopy. Trans-differentiation capacity of human adipose-derived mesenchymal stem cells (hAMSCs) into cardiomyocyte-like cells on dMEbF were also evaluated by histochemical and immunohistochemical analyses. DNA contents for native and dBM were, respectively, found as 886.11?±?164.85 and 47.66?±?0.09?ng/mg dry weight, indicating a successful decellularization process. The results of glycosaminoglycan and hydroxyproline assay, and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), performed in order to characterize the extracellular matrix (ECM) composition of native and dBM tissue, showed that the BM matrix was not damaged during the proposed method. Lastly, regarding the histological study, dMEbF not only mimics native ECM, but also induces the stem cells into cardiomyocyte-like cells phenotype which brings it the potential of use in CTE.     

Preparation of N‐doped graphene powders by cyclic voltammetry and a potential application of them: Anode materials of Li‐ion batteries

Nowadays, doped graphenes are attracting much interest in the field of Li‐ion batteries since it shows higher specific capacity than widely used graphite. However, synthesis methods of doped graphenes have secondary processes that requires much energy. In this study, in situ synthesis of N‐doped graphene powders by using of cyclic voltammetric method from starting a graphite rod in nitric acid solution has been discussed for the first time in the literature. The N‐including functional groups such as nitro groups, pyrrolic N, and pyridinic N have been selectively prepared as changing scanned potential ranges in cyclic voltammetry. The electrochemical performance as anode material in Li‐ion batteries has also been covered within this study. N‐doped graphene powders have been characterized by electrochemical, spectroscopic, and microscopic methods. According to the X‐ray photoelectron spectroscopy and Raman results, N‐doped graphene powders have approximately 16 to 18 graphene rings in their main structure. The electrochemical analysis of graphene powders synthesized at different potential ranges showed that the highest capacity was obtained 438 mAh/g after 10 cycles by using current density of 50 mA/g at N‐GP4. Furthermore, the sample having higher defect size shows better specific capacity. However, the more stable structure due to oxygen content and less defect size improves the rate capabilities, and thus, the results obtained at high current density indicated that the remaining capacity of N‐GP1 was higher than the others.     

Structural,Electrical and Photoresponse Properties of Si-based Diode with Organic Interfacial Layer Containing Novel Cyclotriphosphazene Compound

The electrical and photoresponse properties of Al/p-Si/organic layer/Al diode were investigated. Organic layer containing novel 2,2-bis[spiro(7,8-dioxy- 4-methylcoumarin)]-4,4,6,6-bis[spiro(2’,2”-dioxy-1’,1”- biphenylyl)]cyclotriphosphazene compound was coated by drop casting method on p-Si having ohmic contact. The structural characterization of novel cyclotriphosphazene compound was confirmed by using ¹H, ¹³C and ³¹P-NMR, elemental analysis and FT-IR spectroscopic techniques. The diode exhibits a photoconducting and photodiode behavior under solar light illumination. The electrical parameters such as ideality factor, barrier height and series resistance of the diode were determined from I-V characteristics. It is seen that the photocurrent of the diode under illumination is higher than dark current. Also, the frequency dependence of capacitance (C) and conductance (G) was explained on the basis of interface states. It is evaluated that the hybrid photodiode can be used as a photosensor in organic photodetector applications.     

Improved thermal stability,properties, and electrocatalytic activity of sol-gel silica modified carbon supported Pt catalysts

An improvement in the thermal properties of catalysts used in PEM type fuel cells was achieved by siliceous additions. A sol-gel method was developed to deposit controlled amounts of a siliceous composition on Vulcan XC72 carbon (VC). The catalysts designated as Pt/(VC–SiO₂) were obtained by reduction of H₂PtCl₆ in an aqueous solution with NaBH₄. A nanoscale Pt particle formation was observed on the support materials having a range 2.7–5.1 nm. The thermal stability study for Pt/(VC–SiO₂) catalysts demonstrated that the presence of a siliceous phase conferred an increased resistance to Pt nanoparticle agglomeration at 600 °C. In addition, a decrease in low temperature mass loss was observed. Electrochemical properties evaluated by cyclic voltammetry coupled with a rotating disk electrode (RDE) showed improvements with moderate SiO₂ addition. The synthesized catalysts performance was as good as the performance of the control catalyst (46 wt% Pt/VC, Tanaka). Unfortunately, fuel cell performance experiments showed an unwanted hydrophillic behavior of carbon-silica composite aerogel supports at high current density values. The C–SiO₂ aerogel composite catalyst support seems suitable for low current applications.     

Monotonic torsional resistance and fatigue resistance of novel SCOPE RS instruments

To evaluate monotonic torsional resistance and fatigue resistance of novel SCOPE RS instruments and to compare ROTATE, Hyflex CM, OneCurve, and ProTaper Next instruments as a counterpart. The instrument groups were as follows: SCOPE RS; ROTATE; HyflexCM; OneCurve; ProTaperNext. The cyclic fatigue resistance of unused instruments was tested at both room and body temperatures (n = 10). The time to fracture, the mean number of cycles until failure, and the length of the fractured fragments were analyzed. The monotonic torsional resistance of new instruments was measured in accordingly American National Standards/American Dental Association No. 28 and International Organization for Standardization 3630–1:2008 specifications (n = 10). The maximum torque and angular deflection at break were recorded. The fractographic examination was performed by scanning electron microscope. Energy‐dispersive X‐ray spectroscopy was used to investigate the microstructure of NiTi instruments. One‐way ANOVA with Games‐Howell Post Hoc multiple comparisons tests were used (p < .05). The ROTATE had superior cyclic fatigue resistance than other groups in both temperature conditions (p < .01). However, it exhibited lower torsional resistance than SCOPE RS (p < .01). SCOPE RS had superior torsional resistance than other groups (p < .01). Micrographs revealed typical features of fatigue behaviors in all groups. Weight percentages of the Ni and Ti revealed similarity for all instruments. The novel SCOPE RS instruments presented superior monotonic torsional resistance but failed to show any improvement in the cyclic fatigue resistance compared with its counterparts, ROTATE, HyflexCM, and OneCurve.     

The Comparison of Power and Optimization Algorithms on Unit Root Testing with Smooth Transition

The aim of this study is to search for a better optimization algorithm in applying unit root tests that inherit nonlinear models in the testing process. The algorithms analyzed include Broyden, Fletcher, Goldfarb and Shanno (BFGS), Gauss–Jordan, Simplex, Genetic, sequential quadratic programming and extensive grid-search. The simulation results indicate that the derivative free methods, such as Genetic and Simplex, have advantages over hill climbing methods, such as BFGS and Gauss–Jordan, in obtaining accurate critical values for the Leybourne et al. (J Time Ser Anal 19:83–97, 1998) (LNV) and Sollis (J Time Ser Anal 25:409–417, 2004) unit root tests. Besides, we extend our analysis by including exponential smooth transition type of trend function in to unit root testing which is not used in the previous literature. The same result also holds true for our newly proposed unit root test with exponential smooth transition function type of trend model. Furthermore, we realize that there is a gap in the unit root studies that the newly proposed tests are not analyzed between each other’s data generating process (DGP). Hence, we investigate the power comparison of different nonlinear unit root test under various DGP including nonlinear unit root tests and find interesting results such as LNV type unit root test can manage to capture state dependent nonlinearity when the transition speed is high. Finally, we have used the Australian real interest rate parity hypothesis to empirically verify the results that we have obtained in the simulation studies.