Hot carrier analysis in low-temperature poly-Si thin-film transistors using pico-second time-resolved emission microscope

We have analyzed degradation of N-channel thin-film-transistor (TFT) under dynamic stress using a pico-second time-resolved emission microscope. We have successfully detected emission at pulse fall edge for the first time. Emission intensity increased with the decrease of pulse fall time. As the degradation depended on the pulse fall time, this dependence clearly illustrates that hot electrons are the dominant cause of the degradation under dynamic stress. Based on these dependences, we proposed a model considering electron traps in the poly-Si.     

Effect of load ratio on the deformation behaviour of fatigue crack tips

To investigate the change in the manner of plastic deformation at a fatigue crack tip under different loading conditions, the fresh surface area which is produced in one fatigue cycle at the crack tip was measured by an electrochemical method under various load ratios. The fresh surface area produced in each fatigue cycle is in proportion to the crack propagation rate in the Paris regime. This indicates that the crack tip geometry at K_max maintains a similar profile through the Paris regime. Furthermore, the fresh surface area is independent of load ratio at a given da/dN in the Paris regime. This suggests that the shape of the fatigue crack tip at K_max should be independent of load ratio at a given da/dN, and that the shape at K_min is also independent of load ratio, whereas the size of the deformed region at the crack tip is in proportion to da/dN.     

Bright-field scanning confocal electron microscopy using a double aberration-corrected transmission electron microscope

Scanning confocal electron microscopy (SCEM) offers a mechanism for three-dimensional imaging of materials, which makes use of the reduced depth of field in an aberration-corrected transmission electron microscope. The simplest configuration of SCEM is the bright-field mode. In this paper we present experimental data and simulations showing the form of bright-field SCEM images. We show that the depth dependence of the three-dimensional image can be explained in terms of two-dimensional images formed in the detector plane. For a crystalline sample, this so-called probe image is shown to be similar to a conventional diffraction pattern. Experimental results and simulations show how the diffracted probes in this image are elongated in thicker crystals and the use of this elongation to estimate sample thickness is explored.     

Electron beam-induced formation of nanosized α-Fe crystals

Focused electron beam induced chemical vapor deposition was performed in a scanning electron microscope with a field emission gun using a precursor of iron carbonyl. Due to the longer deposition time and higher gas pressure than those of our previous electron beam-induced deposition method, a new type of deposition occurred. A large amount of nanosized crystals were produced around the focused beam irradiation point on a carbon substrate at room temperature. The nanocrystals were systematically characterized using transmission electron microscopy with electron energy loss spectroscopy (EELS), and were identified to be single crystals of α-Fe.     

Fabrication and characterization of potassium-sodium niobate piezoelectric ceramics by spark-plasma-sintering method

High density (Na_1−xK_x)NbO₃ (x = 0.5, 0.6, and 0.7) ceramics were successfully prepared by spark-plasma-sintering (SPS) method. The dielectric and piezoelectric properties of the SPS samples were investigated and compared to that of hot-pressed samples. It is found that, the SPS-sintered (Na_1−xK_x)NbO₃ samples show higher room temperature dielectric constant, higher coercive fields, lower remnant polarizations and lower electromechanical coefficients than that of the hot-pressed (Na_1−xK_x)NbO₃ samples. The dielectric and piezoelectric property differences between the SPS-sintered and hot-pressed samples have been attributed to grain size effects.     

基于同时发射声纳环移动机器人导航系统

开发了一种能在未知环境下实现快速障碍检测与障碍回避的基于同时发射声纳环移动机器人导航系统。为了消除由于同时发射造成的串话干扰,提出了一种基于神经网络模式识别的过滤方法;并制作了由24个声纳传感器组成的声纳环安装到实际的移动机器人上,实现了扫描频率最大可达到66 Hz的全景检测。系统中应用了动态窗口法来完成快速障碍回避的运动规划。实际的导航实验表明,系统可用于室内未知环境中的移动机器人快速导航。     

Effect of the addition of silver compounds during the pyrolysis of manganese nitrate on tantalum anodic oxide film

A study of the pyrolysis of an aqueous solution of manganese nitrate in the presence of silver compounds has been carried out. Thermal analysis showed that the MnO₂ formation temperature and the transformation temperature from MnO₂ to Mn₂O₃ shifted towards a lower temperature in the presence of silver acetate. A large particle-size and high crystallinity MnO₂ was formed; this may be a useful method of making an excellent tantalum capacitor with high capacitance.     

Experimental examination of the characteristics of bright-field scanning confocal electron microscopy images

We experimentally examined the characteristics of bright-field (BF) scanning confocal electron microscopy (SCEM) images by changing the observation conditions and comparing the images with those obtained by BF transmission electron microscopy (TEM) and BF scanning TEM (STEM) modes. The observation of 5-nm-diameter Au nanoparticles demonstrated that BF-SCEM produces object elongation of more than 2000?nm along the optical axis, as do BF-TEM and BF-STEM. We demonstrated the relationship between elongation length and geometric effects such as convergence and collection angles of a probe and the lateral size of an object; the relationship is consistent with previous theoretical prediction. Further, we observed interesting features that are seen only in the BF-SCEM images; the film contrast was strongly enhanced, compared with that of BF-STEM. In addition, a bright contrast appeared around the object position in the elongated images. Using this characteristic, we could determine the object position and structure.     

Solvent extraction and stripping of silver ions in room-temperature ionic liquids containing calixarenes

We found that a calix[4]arene-bearing pyridine is soluble in a typical room-temperature ionic liquid (RTIL), 1-alkyl-3-methylimidazolium hexafluorophosphate. Pyridinocalix[4]arene showed a high extraction ability and selectivity for silver ions. The extraction performance of the calix[4]arene was greatly enhanced by dissolution in RTILs compared to in chloroform. In a competitive extraction test using five different metal ions (Ag+, Cu2+, Zn2+, Co2+, Ni2+), only silver ions were transferred by the calix[4]arene from the aqueous feed phase into the RTILs, through a cation-exchange mechanism. The pyridinocalix[4]arene was found to form a stable 1:1 complex with silver ions, both by slope analysis and by Job's method. Since it is easy to strip silver ions from RTILs by controlling the aqueous-phase pH, the extraction performance of calix[4]arene in RTILs was maintained after five repeated uses.     

Sphingolipid base metabolism. Sphinganine-1-phosphate lyase: identification of ethanolamine 1-phosphate as product

Ethanolamine 1-phosphate has been characterized as a product of the action of rat liver microsomal sphinganine 1-phosphate lyase on erythro-sphinganine 1-phosphate. The product was characterized by various forms of chromatography, gas-liquid chromatography-mass spectral analysis of appropriate derivatives, and by conversion to ethanolamine. The results of detailed studies of the mass spectral fragmentation of the tetra-trimethylsilyl derivative of ethanolamine 1-phosphate are also reported.