Synthesis,structure, CO oxidation,and H2 production activities of CaCu3−xMnxTi4−xMnxO12 (x = 0, 0.5, and 1.0)

Synthesis of nanocrystalline pristine and Mn-doped calcium copper titanate quadruple perovskites, CaCu_3?xMn_xTi_4?xMn_xO₁₂ (x = 0, 0.5, and 1.0) by modified citrate solution combustion method has been reported. Powder X-ray diffraction patterns attest the phase purity of the perovskite materials. Average particle sizes of all the materials obtained from the Scherrer's formula are in the range of 55–70 nm. The specific surface areas for all the perovskites obtained from BET isotherms are found to be low as expected for the condensed oxide systems and fall in the range of 13–17 m² g^?1. Transmission electron microscopy studies show a reduction in particle size of CaCu₃Ti₄O₁₂ with increase in Mn doping. Ca and Ti are present in +2 and +4 oxidation states in all the materials as demonstrated by X-ray photoelectron spectroscopy analyses. Cu²⁺ gets reduced in CaCu₃Ti₄O₁₂ with higher Mn content. Mn is observed to be present only in +3 oxidation state. All the materials have been examined to be active in CO oxidation as well as H₂ production from methanol steam reforming. CaCu₃Ti₄O₁₂ with ~14 at.% Mn is found to show best catalytic activities among these materials. A comprehensive analysis of the catalytic activities of these perovskites toward CO oxidation and H₂ production from MSR reveal the cooperative activity of copper-manganese in the doped perovskites and it is more effective at lower manganese content.     

Novel Short-chain Crosslinked Cationomeric Polyurethanes

Summary Novel PUs containing pyridinium moieties were synthesized by chain extending isocyanate endcapped prepolymers with N, N’-bis (2-hydroxyethyl) isonicotinamide. The pyridinium moieties in the PUs were chemically crosslinked using short-chain divalent quaternising agents. The polyurethane cationomers were characterized by spectral, thermal and mechanical analysis. Spectral results confirmed the quaternisation of tertiary nitrogen leading to crosslinking. Compared to conventional PUs, the crosslinked PU networks exhibited improved thermal stability. The damping value (i.e.) tan δ for cationomers were improved over a broad temperature range when compared to conventional PU.     

Development of correlation between potassium hydroxide number and conductivity of concentrated natural rubber latex

Increase in the ion concentration in the medium was found to increase conductivity and potassium hydroxide number (KOH No) in natural rubber latex (NRL). Addition of long chain fatty acids can increase the ion concentration in the medium and stability of NRL. A series of concentrated natural rubber latex samples from three different areas with different soils and climatic conditions were tested for the parameters such as KOH No and conductivity. They have been measured over a period of 62 days, upon addition of soap to natural rubber latex concentrate. The result showed that there was a strong positive linear correlation between conductivity and KOH No. The regression equation to express the relationship between the variables has also been found. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Hardware monitoring of a multiprocessor system

The Testbed for Distributed Processing, or Ted, consists of Intel Corp.'s iSBC 8086 single board computers (SBCs) organized into groups or clusters. Each cluster consists of several SBCs that communicate via a shared memory. Intercluster communication occurs through an Ethernet interface. A hardware monitor designed and implemented to handle the monitoring activities within a cluster in the Ted system is described. By using specified patterns and don't-care masks, the system can detect accesses to selected data, addresses, or blocks of addresses. This function helps monitor events such as the access or usage of a memory location or a group of mailbox addresses. It also determines the amount of time consumed by the performance of specific operations     

Characterization and Catalytic Properties of Combustion Synthesized Au/CeO2 Catalyst

Ceria-supported Au catalyst has been synthesized by the solution combustion method for the first time and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Au is dispersed as Au⁰ as well as Au³⁺ states on CeO₂ surface of 20-30 nm crystallites. On heating the as-prepared 1% Au/CeO₂ in air, the concentration of Au³⁺ ions on CeO₂ increases at the expense of Au⁰. Catalytic activities for CO and hydrocarbon oxidation and NO reduction over the as-prepared and the heat-treated 1% Au/CeO₂ have been carried out using a temperature-programmed reaction technique in a packed bed tubular reactor. The results are compared with nano-sized Au metal particles dispersed on -Al₂O₂ substrate prepared by the same method. All the reactions over heat-treated Au/CeO₂ occur at lower temperature in comparison with the as-prepared Au/CeO₂ and Au/Al₂O₂. The rate of NO + CO reaction over as-prepared and heat-treated 1% Au/CeO₂ are 28.3 and 54.0 mol g^-1 s^-1 at 250 and 300 °C respectively. Activation energy (E _a) values are 106 and 90 kJ mol^-1 for CO + O₂ reaction respectively over as-prepared and heat-treated 1% Au/CeO₂ respectively.     

Saponification kinetic study of mica-acrylonitrile graft copolymers

Kinetics of alkaline hydrolysis of mica-acrylonitrile graft copolymers was studied. The dependence of alkali concentration and the time of hydrolysis on the degree of saponification was determined. Chemical and spectroscopical techniques were used to determine the mechanism of hydrolysis.     

Ultrasonic technique for measuring porosity of plasma-sprayed alumina coatings

Porosity is an important factor in plasma-sprayed coatings, especially ceramic coatings. Excessive poros-ity can adversely affect the performance of the coated component in various ways. An ultrasonic nonde-structive measurement technique has been developed to measure porosity in plasma-sprayed alumina coatings. The technique is generic and can be extended to other ceramic coating systems. To test the tech-nique, freestanding alumina coatings with varying levels of porosity were fabricated via plasma spray. Samples with varying porosity, obtained through innovative fabrication techniques, were used to gener-ate a calibration curve. The ultrasonic velocity in the low-frequency range was found to be dependent on the density of freestanding coatings (measured via Archimedian techniques). This dependence is the basis of the development of a technique to measure the density of coatings.     

Building a Language‐Independent Discourse Parser using Universal Networking Language

Discourse parsing has become an inevitable task to process information in the natural language processing arena. Parsing complex discourse structures beyond the sentence level is a significant challenge. This article proposes a discourse parser that constructs rhetorical structure (RS) trees to identify such complex discourse structures. Unlike previous parsers that construct RS trees using lexical features, syntactic features and cue phrases, the proposed discourse parser constructs RS trees using high‐level semantic features inherited from the Universal Networking Language (UNL). The UNL also adds a language‐independent quality to the parser, because the UNL represents texts in a language‐independent manner. The parser uses a naive Bayes probabilistic classifier to label discourse relations. It has been tested using 500 Tamil‐language documents and the Rhetorical Structure Theory Discourse Treebank, which comprises 21 English‐language documents. The performance of the naive Bayes classifier has been compared with that of the support vector machine (SVM) classifier, which has been used in the earlier approaches to build a discourse parser. It is seen that the naive Bayes probabilistic classifier is better suited for discourse relation labeling when compared with the SVM classifier, in terms of training time, testing time, and accuracy.