Deposition of carbon films by electrolysis of a water-ethylene glycol solution

An attempt was made to deposit carbon films by electrolysis of a water-ethylene glycol solution. Carbon plate and an n-type silicon substrate were dipped in the solution and a high d.c. potential was negatively applied on the silicon substrate. Some deposits were observed in the region between the boiling point curve and the line approximately 50 °C below and parallel to the boiling point, when electrolysis was carried out at 1 kV for 6 h. For higher potentials of 1.4–2.0 kV and longer electrolysis of 12 h, some samples showed a broad X-ray diffraction peak and Raman peaks, corresponding to graphitic carbon.     

Exact and heuristic algorithms for the aerial refueling parallel machine scheduling problem with due date-to-deadline window and ready times

The Aerial Refueling Scheduling Problem (ARSP) can be defined as determining the refueling completion times for fighter aircrafts (jobs) on multiple tankers (machines) to minimize the total weighted tardiness. ARSP can be modeled as a parallel machine scheduling with ready times and due date-to-deadline window to minimize total weighted tardiness. ARSP assumes that the jobs have different ready times and a due date-to-deadline window between refueling due date and a deadline to return without refueling. In this paper, we first formulate the ARSP as a mixed integer programming model. The objective function is a piece-wise tardiness cost that takes into account due date-to-deadline windows and job priorities. Since ARSP is NP-hard, two heuristics are proposed to obtain solutions in reasonable computation times, namely (1) modified ATC rule (MATC), (2) a simulated annealing method (SA). The proposed heuristic algorithms are tested in terms of solution quality and CPU time through computational experiments with data randomly generated to represent aerial refueling operations of an in-theater air operation. Solutions provided by both algorithms were compared to optimal solutions for problems with up to 12 jobs and to each other for larger problems with up to 60 jobs. The results show that, MATC is more likely to outperform SA especially when the problem size increases, although it has significantly worse performance than SA in terms of deviation from optimal solution for small size problems. Moreover CPU time performance of MATC is significantly better than SA in both cases.     

A heuristic algorithm for the just-in-time single machine scheduling problem with setups: a comparison with simulated annealing

This paper addresses the single machine early/tardy problem with unrestricted common due date and sequence-dependent setup times. Two algorithms are introduced to reach near-optimum solutions: the SAPT, a heuristic tailored for the problem, and a simulated annealing (SA) algorithm. It will be shown that SA provides solutions with slightly better quality; however, SAPT requires much less computational time. SAPT-SA is a hybrid heuristic that combines both approaches to obtain high quality solutions with low computational cost. Solutions provided by the three algorithms were compared to optimal solutions for problems with up to 25 jobs and to each other for larger problems.     

Hybrid elitist-ant system for a symmetric traveling salesman problem: case of Jordan

This work investigates the performance of a hybrid population-based meta-heuristic with an external memory structure of a hybrid elitist-ant system (elitist-AS). This memory is known as an elite pool, which contains high quality and diverse solutions to maintain a balance between diversity and quality of the search. This may guarantee the effectiveness and efficiency of the search, which could enhance the performance of the algorithm across different instances. A very well known and intensively studied NP-hard optimization problem has been selected to test the performance of the hybrid elitist-AS via its consistency, effectiveness and efficiency. This famous problem is the symmetric traveling salesman problem. The elitist-AS is a class of ant colony optimization techniques which are known to be outstanding for the traveling salesman problem where they have the ability to find the shortest tours guided by the heuristic and the pheromone trail information. An iterated local search is combined with elitist-AS to intensify the search around elite solution and maintains the solution’s exploitation mechanism. Experimental results showed that the performance, compared to the best known results, is optimal for many instances. This finding indicates the effectiveness, efficiency and consistency in diversifying the search while intensifying high-quality solutions. This outstanding performance is due to the utilization of an elite pool along with diversification and intensification mechanisms. In addition, this work proposes two instances that consist of 26 Jordanian cities and 1094 Jordanian locations which have been generated based on coordinates and distances similar to the format of the selected symmetric traveling salesman problem. This step is meant to contribute to finding a solution for a real-world problem and further test the performance of the hybrid elitist-AS.

     

CONSENSUS FUNCTIONS FOR CLUSTER ENSEMBLES

The major task of clustering is to group an heterogeneous population into unknown groups based on a similarity measure. In order to enhance the robustness and the stability of unsupervised classification solutions, clustering ensembles are used; they are considered to be a powerful tool to deal with this issue. Individual clusterers consolidate the process of decision making through the concept of weighting. The aim is to determine an effective combination method that makes use of the benefits of each clusterer while avoiding its weaknesses. In this paper, we study the problem of combining multiple partitioning without accessing the original features. A genetic algorithm is proposed using three different fitness scores. Following three scenarios: Object Distributed Clustering, Feature Distributed Clustering, and Robust Centralized Clustering, the proposed consensus functions algorithm outperforms three existing ones: Cluster-based Similarity Partitioning Algorithm, HyperGraph Partitioning Algorithm and Meta-Clustering Algorithm.     

Changes in Fatty Acid, Tocopherol and Xanthophyll Contents During the Development of Tunisian-Grown Pecan Nuts

Among oil compounds, fatty acids, tocopherols and xanthophylls (lutein and zeaxanthin) are of special interest due to their nutritional properties. The identification and quantification of these compounds in pecan nuts (Carya illinoinensis) could therefore be very useful to produce functional foods rich in compounds of this type. This paper reports studies on their accumulation and the effect of ripening on the content of these high value-added compounds. The total lipid content increased during the ripening. Saturated and polyunsaturated fatty acids decreased significantly, whereas, monounsaturated fatty acids increased during the ripening of pecan nut fruit. Maximum levels of total tocopherol (279.53 mg/kg oil) and xanthophyll (6.18 mg/kg oil) were detected at 20th weeks after the flowering date. These amounts decreased gradually as ripening advances. The early stages of pecan ripening seem to have nutritional and pharmaceutical interests. These results may be useful for evaluating the pecan nut quality and determining the optimal period when the pecans accumulated the maximum of these nutritional and healthy compounds.     

Amorphous-silicon field-effect device and possible application

The characteristics of an insulated-gate field-effect transistor made from amorphous silicon (a-Si) deposited in a glow discharge are discussed. It is suggested that the a-Si device could be applied with advantage in an addressable matrix of a liquid-crystal display panel.     

Fabrication of electrically conductive membrane electrode of gelatin-tin (IV) phosphate nanocomposite for the detection of cobalt (II) ions

Gelatin-tin (IV) phosphate nanocomposite (GT/TPNC) ion exchanger was synthesized by mixing gelatin gel into the precipitates of tin (IV) phosphate using sol–gel method. GT/TPNC was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The ion exchange capacity of GT/TPNC was reported to be1.44?meq/g. The material was found monofunctional as indicated from pH titration curves. The distribution coefficient of different metal ions such as Zn²⁺ (42.10), Cd²⁺ (37.93), Mg²⁺ (33.33), Cu²⁺ (33.21), Al³⁺ (14.28), Pb²⁺ (6.06), Ni²⁺ (12.50) and Co²⁺ (50.0) was studied using GT/TPNC ion exchanger. The distribution studies confirmed the selectivity of GT/TPNC for Co (II). The photocatalytical degradation of MB was found to be 78% within 5 h of solar illumination using GT/TPNC. Some binary separations such as Co²⁺–Pb²⁺, Cd²⁺–Ni²⁺, Co²⁺–Mg²⁺, Mg²⁺–Zn²⁺, Pb²⁺–Zn²⁺, Cu²⁺–Al³⁺, Al³⁺–Cd²⁺, Ni²⁺–Cu²⁺ were attempted using GT/TPNC ion exchanger. GT/TPNC was explored for the fabrication of ion-sensitive membrane electrode for the determination of Co (II) in the water system. The membrane electrode was found mechanically more stable with quick response time (30?s) and a wide pH working range (4.0–7.0).     

Influence of the design materials on the mechanical and physical properties of repair mortars of historic buildings

Historic buildings are subjected to deterioration by natural weathering or by corrosion due to polluted atmosphere and the materials more susceptible are the mortars used. This study examines the influence of the type and quantity of design materials on compressive strength, creep, water absorption and length change of repair mortars produced. The design materials used were lime, natural pozzolan, sand and brick fragments in order to obtain the compatibility required between historic and repair mortars; different quantities of Portland cement were also used in order to quantify his influence. Nine mixtures were then designed and produced considering as parameters two binder: aggregates ratios, three pozzolan: cement ratios and three sand: brick fragments ratios. The experimental measurements continued until the age of 3 years or the stabilization of the test values. The results indicate that compressive strength is strongly affected by cement content and aggregates dosage and type. It appears that the increase of cement as well as brick fragments leads to confinement of creep deformation, while the mixtures with high pozzolan and sand content experience considerably high creep values. Water absorption reaches higher values when pozzolan or aggregate dosage arises and brick is in excess. Shrinkage increases when binder or brick quantity arise and is considerably influenced by cement content.     

Formal Methods Based Synthesis of Single Event Transient Tolerant Combinational Circuits

Recent radiation ground testing campaigns of digital designs have demonstrated that the probability for Single Event Transient (SET) propagation is increasing in advanced technologies. This paper presents a hierarchical reliability-aware synthesis framework to design combinational circuits at gate level with minimal area overhead. This framework starts by estimating the vulnerability of the circuit to SETs. This is done by modeling the SET propagation as a Satisfiability problem by utilizing Satisfiability Modulo Theories (SMTs). An all-solution SMT solver is adapted to estimate the soft error rate due to SETs. Different strategies to mitigate SETs are integrated in the proposed framework to selectively harden vulnerable nodes in the design. Both logical and temporal masking factors of the target circuit are improved to harden sensitive paths or sub-circuits, whose SET propagation probability is relatively high. This process is repeated until the desired soft error rate is achieved or a given area overhead constraint is met. The proposed framework was implemented on different combinational designs. The reliability of a circuit can be improved by 64% with less than 20% area overhead.