Preparation of ultra‐low‐density microcellular materials

Microcellular polymeric materials can be obtained by the polymerization of a high‐internal‐phase emulsion. These materials are good candidates as targets toward inertial confinement fusion. This application requires severe specifications, including a very low density and a small cell size. In this study, we examined the influence of parameters such as emulsification conditions, surfactant nature, and the presence of a porogen on the obtainment of those requirements. It was possible to obtain microcellular polymeric foams with apparent densities as low as 0.0126 g/cm³. However, it was difficult to obtain very low material density and still maintain a small average pore size. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2053–2063, 2005     

Relationship between seizure frequency and costs and quality of life of outpatients with partial epilepsy in France, Germany, and the United Kingdom

PURPOSE: The relationship between seizure frequency and both health care costs and quality of life (QOL) was investigated in a retrospective, cross-sectional, multicenter study in France, Germany, and the United Kingdom. METHODS: Three hundred outpatients with stable partial epilepsy were approximately evenly distributed among five seizure-frequency groups, ranging from seizure-free in the last 3 months (group 1) to daily seizures (group 5). Economic data, obtained through patient interviews and record abstraction, comprised direct medical costs, direct nonmedical costs, and indirect costs for the preceding 3 months. Total societal costs in the three countries were pooled and converted to United States dollar equivalents. QOL was assessed through a self-administered questionnaire, the Functional Status Questionnaire (FSQ). RESULTS: Mean total costs increased from $780 in group 1 to $2,171 in group 5 (p = 0.0001), with significant increases in each cost category as seizure frequency increased. Greater seizure frequency also significantly (p = 0.0270) correlated with lower employment rates, which ranged from 57% in group 1 to 30% in group 5. QOL declined as seizure frequency increased. Particularly affected were basic and intermediate activities of daily living (ADL), mental health, social activity, and feeling about health. CONCLUSIONS: The study results show that higher seizure frequencies are associated with higher direct and indirect costs and with reduced QOL for patients with epilepsy.     

Size, diffusibility and transfection performance of linear PEI/DNA complexes in the mouse central nervous system

Currently in vivo gene delivery by synthetic vectors is hindered by the limited diffusibility of complexes in extra-cellular fluids and matrices. Here we show that certain formulations of plasmid DNA with linear polyethylenimine (22 kDa PEI, ExGene 500) can produce complexes that are sufficiently small and stable in physiological fluids so as to provide high diffusibility. When plasmid DNA was formulated with 22 kDa PEI in 5% glucose, it produced a homogeneous population of complexes with mean diameters ranging from 30 to 100 nm according to the amount of PEI used. In contrast, formulation in physiological saline produced complexes an order of magnitude greater (> or = 1 micron). Intraventricular injection of complexes formulated in glu-cose showed the complexes to be highly diffusible in the cerebrospinal fluid of newborn and adult mice, diffusing from a single site of injection throughout the entire brain ventricular spaces. Transfection efficiency was followed by histochemistry of beta-galactosidase activity and double immunocytochemistry was used to identify the cells transfected. Transgene expression was found in both neurons and glia adjacent to ventricular spaces. Thus, this method of formulation is promising for in vivo work and may well be adaptable to other vectors and physiological models.     

Validation of the three-dimensional acquisition mode in positron emission tomography for the quantitation of [18F]fluoro-DOPA uptake in the human striata

Three-dimensional (3D) positron emission tomography (PET) is attractive for [18F]fluoro-DOPA studies, since the sensitivity improvement is maximal for radioactive sources located in central planes, which is usually the case for the human striata. However, the image quantitation in that mode must be assessed because of the nearly threefold increase in scattered coincidences. We report the results of [18F]fluoro-DOPA studies performed on six normal volunteers. Each one was scanned in the 3D and two-dimensional (2D) modes on the same tomograph. The quantitation in the 3D and 2D modes was compared for a Patlak graphical analysis with the occipital counts as the input function (Ki) and a striatooccipital ratio analysis. We find that, in 3D PET, a scatter correction is required to preserve the same quantitation as in 2D PET. When the 3D data sets are corrected for scatter, the quantitation of the [18F]fluoro-DOPA uptake, using the Patlak analysis, is similar in the 2D and 3D acquisition modes. Conversely, analysis of the striatooccipital ratio leads to higher values in 3D PET because of a better in-plane resolution. Finally, using the 3D mode, the dose injected to the subjects can be reduced by a factor greater than 1.5 without any loss in accuracy compared to the 2D mode.     

Recovering the observable part of the initial data of an infinite-dimensional linear system with skew-adjoint generator

We consider the problem of recovering the initial data (or initial state) of infinite-dimensional linear systems with unitary semigroups. It is well-known that this inverse problem is well posed if the system is exactly observable, but this assumption may be very restrictive in some applications. In this paper we are interested in systems which are not exactly observable, and in particular, where we cannot expect a full reconstruction. We propose to use the algorithm studied by Ramdani et al. in (Automatica 46:1616–1625, 2010) and prove that it always converges towards the observable part of the initial state. We give necessary and sufficient condition to have an exponential rate of convergence. Numerical simulations are presented to illustrate the theoretical results.     

The Sanaga discharge at the Edea Catchment outlet (Cameroon): An example of hydrologic responses of a tropical rain‐fed river system to changes in precipitation and groundwater inputs and to flow regulation

The Sanaga River is one of Sub‐Saharan Africa's largest and greatly regulated rivers. Available flow data for this hydrosystem largely cover the pre‐ and post‐regulation periods. From comparisons between unregulated (hypothetical) and observed scenarios, it has been possible to separate and to quantify hydro‐climatic (groundwater + rainfall) change effects from anthropogenic impacts (especially dam‐related alterations). To appreciate shifts in the river regime, discontinuity detection tests and the IHA model were applied to discharge data series reflecting average and extreme flow conditions, respectively. Results obtained principally from the Hubert segmentation method reveal that a major discontinuity occurred in 1970–1971 separating a surplus phase between 1945–1946 and 1969–1970, and a deficient and much contrasted one, from 1971/1972. This implies that the Sanaga catchment is dominantly affected by hydro‐climatic changes. However, wide land cover/land use changes experienced here since 1988 have resulted in an increase in surface runoff. Additional quickflows linked to these changes may have partly compensated for the substantial decline in the dry season rainfall and groundwater inputs observed from this date. Although at the monthly scale, dam‐related impacts on average flows increase with stage of regulation, the seasonal variability of the river regime remains generally unaffected. A comparison of the IHA statistics, calculated from unregulated and observed streamflow data, show that hydrologic shifts occurring in maximum and minimum discharges are mostly significant from 1971/1972 and are mainly due to the action of dams. Minimum flows appear, however, widely impacted, thus reflecting the prime objective assigned to the existing reservoirs, constructed to supplement flows for hydroelectricity production during the dry season. Copyright © 2010 John Wiley & Sons, Ltd.     

Application of neural-fuzzy controller for streaming video over Bluetooth 1.2

This paper is to introduce an application of Computational Intelligence (CI) to Moving Picture Expert Group-4 (MPEG-4) video compression over IEEE.802.15.1 wireless communication, known as Bluetooth 1.2, in order to improve picture quality. The 2.4 GHz Industrial, Scientific and Medical frequency band is used for the IEEE.802.15.1 standard. IEEE.802.15.1 can be affected by noise and interference due to other neighboring wireless devices sharing the same frequency carrier. The noise and interference create difficulties in ascertaining an accurate real-time transmission rate at the receiving end. Furthermore, the MPEG-4 codec is an object-oriented compression system and demands a high bandwidth. It is therefore difficult to avoid excessive delay, image quality degradation and/or data loss during MPEG-4 video transmission over standard systems. A new buffer entitled ‘buffer added’ has been introduced at the input of the Bluetooth 1.2 device. This buffer is controlled by a Rule-Based Fuzzy (RBF) logic controller at the input and a neural-fuzzy controller (NFC) at the output. The two new fuzzy rules manipulate and supervise the flow of video over the Bluetooth 1.2 standard. The computer simulation results illustrate the comparison between a non-CI video transmission over Bluetooth 1.2 and the proposed design, confirming that the applications of RBF and NFC do improve the image quality, reduce data loss and reduce time delay.     

Energy analysis of conventional and source-separation systems for urban wastewater management using Life Cycle Assessment

This study investigates the cumulative energy demand (CED) of different systems for the management of urban wastewater, following the methodology of Life Cycle Assessment. In a hypothetical case study for an urban area (5,000 inhabitants), all relevant processes for wastewater collection and treatment and the construction of infrastructure are described in a substance flow model. The conventional system requires 1,250 MJ/(pe*a), with the operation contributing 45%, the infrastructure 7%, and the system expansion (production of mineral fertilizer and electricity) 48% to the total CED. The separation systems have a CED of 930-1,182 MJ/(pe*a) depending on their configuration. Results of the impact assessment show that recovering energy from the organic matter of toilet wastewater and household biowaste in a digestion process can decrease the cumulative energy demand by 13-26%. Energetic benefits of mineral fertilizer substitution are relatively small compared to the energy recovered from organic matter. Decisive parameters for the energy analysis are the amount of biowaste which is co-digested with toilet wastewater and the energy demand of the vacuum plant.