Effects of Prior Annealing on the Spark Plasma Sintering of Nanostructured Y2O3 Powders

The effects produced by annealing Y₂O₃ nanopowders on their spark plasma sintering (SPS) behavior are systematically investigated in this work. It is found that the annealed powders display higher sinterability with respect to the as‐received ones. Indeed, the maximum densification level reached from pristine powders is about 97.5%, whereas density decreases when further increasing either the sintering temperature or the dwell time. In contrast, the density of SPS products obtained from pretreated powder monotonically increases with temperature and processing time, thus leading to fully dense materials in 30 min at 1050°C and 60 MPa. Correspondingly, it is found that the annealing treatment markedly inhibits grain coarsening during SPS. Thus, dense translucent samples with grain size below 100 nm can be attained from annealed powders. On the other hand, white‐opaque specimens with significantly coarser microstructures (up to 1‐μm‐sized grains) are obtained when pristine powders are directly processed under the same sintering conditions. Furthermore, it is observed that the annealing treatment of SPS samples in air allows for graphite contamination removal, whereas no improvement in term of light transmittance is produced.     

Vibrational analysis of functionalized polyolefins/poly(vinylchloride) blends

Polyolefins functionalized with diethylmaleate were mixed with poly(vinylchloride) (PVC) in different compositions. Intermolecular interactions involving the carbonyl groups of the side chains of the functionalized polyolefins and methine hydrogens of PVC were investigated by means of infrared spectroscopy. The major flexibility of the ester groups attached to the backbone chains, with respect to polyesters, seems to increase the capability of such groups to interact with groups of more polar polymers, thus allowing prediction of easier miscibility, which however also depends on the starting polyolefin structure and function-alization degree.     

Fault-accommodation with intelligent sensors

Optimal sensor fault-accommodation is considered for faults modelled by an increase in measurement noise. This noise is taken to be bounded and its probabilistic properties unknown. It is assumed that intelligent (e.g. self-validating) instrumentation is in use and estimates of the noise bounds are available. The fault-tolerant controller is designed to optimize a noise rejection and a nominal reference tracking index and leads to a mixed norm minimization problem (l₁/l₂). We exploit known results and a particular feedback configuration to show that it is possible to optimize simultaneously without a trade-off the two performance indices. The results are applied to systems where the presence of auxiliary measurements allows for an optimal fault-accommodation strategy. Using properties of the optimal solution, we define a factorization for the optimal controller alternative to the Youla parametrization, leading to an algorithm which is optimal, transparent and efficient.     

Resilience to Loss in Bereaved Spouses, Bereaved Parents, and Bereaved Gay Men.

Recent research has indicated that many people faced with highly aversive events suffer only minor, transient disruptions in functioning and retain a capacity for positive affect and experiences. This article reports 2 studies that replicate and extend these findings among bereaved parents, spouses, and caregivers of a chronically ill life partner using a range of self-report and objective measures of adjustment. Resilience was evidenced in half of each bereaved sample when compared with matched, nonbereaved counterparts and 36% of the caregiver sample in a more conservative, repeated-measures ipsative comparison. Resilient individuals were not distinguished by the quality of their relationship with spouse/partner or caregiver burden but were rated more positively and as better adjusted by close friends. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Simultaneous Spark Plasma Synthesis and Densification of TiC–TiB2 Composites

The simultaneous synthesis and densification of dense TiC–TiB₂ composite has been investigated starting from Ti, B₄C, and C as reactants, and using the spark plasma sintering (SPS) technique. The optimal conditions for complete conversion of the reactants to the composite were determined for different applied DC current levels. A kinetic investigation performed allows us to conclude that solid-state diffusion is the mechanism governing the synthesis process. It is seen that TiC is the first phase formed, while TiB₂ formation occurs afterward. Two intermediate boride phases, i.e. TiB and Ti₃B₄, are also formed but, as the SPS holding time was augmented, they were gradually and completely converted to TiB₂. Moreover, it is found that in order to reach relatively high dense products, an electric current needs to be applied for time intervals longer than those required for obtaining complete conversion. A pure dense product (relative density ∼98%) was obtained when an electric pulsed current of 1100 A and a mechanical pressure of 20 MPa were applied for about 4 min.     

Thoracoscopic pleural tent

Lung volume reduction has been performed in patients with advanced emphysema to relieve dyspnea and improve exercise tolerance. Median sternotomy and video-assisted thoracoscopy have been proposed as equally adequate approaches; however, prolonged postoperative air leakage is the most prevalent complication in all series. For this reason, on the basis of the experience achieved with the median sternotomy approach, buttressing of the suture line with different materials and techniques for space reduction have been proposed. We describe a technique to create a pleural tent after thoracoscopic volume reduction. The thoracoscopic creation of a pleural tent is feasible and results in a duration of postoperative air leaks and hospital stays similar to that achieved with stapler line buttressing.     

Reevaluation of Cl-/HCO3- exchange in cultured bovine corneal endothelial cells

PURPOSE: To determine the apical versus basolateral polarity of the putative anion exchanger in cultured bovine corneal endothelial cells (BCECs) and to examine the influence of Cl--dependent membrane potential (Em) changes on HCO3- transport. METHODS: BCECs grown on permeable supports were used for independent perfusion of apical and basolateral surfaces. Intracellular pH (pHi) was measured using the fluorescent dye BCECF. Relative changes in Em were measured using the fluorescent dye bis-oxonol. Western blot analysis was used to detect immunoreactivity against the anion exchanger (AE1 or AE2). RESULTS: Cl- removal from apical and basolateral surfaces produced cellular alkalinization (apical side, 0.07 pH units; basolateral side, 0.06 pH units; both sides, 0.20 pH units). Application of 100 microM H2-4,4'-diisothiocyanatodihydrostilbene-2,2'-disulfonic acid (DIDS), an anion exchange inhibitor, on the apical side produced an alkalinization (0.02 pH units) followed by acidification (-0.05 pH units), whereas basolateral H2DIDS caused a substantial acidification (-0.16 pH units). In the absence of Na+, Cl- removal from the apical side caused a transient alkalinization (0.03 pH units) followed by a return to baseline; Cl- removal from the basolateral side caused a small (-0.03) acidification. In Na+-free Ringer, apical H2DIDS produced a transient alkalinization (0.02 pH units), whereas basolateral exposure had no effect. 5-Nitro-2-(3-phenylpropylamino)benzoic acid (NPPB), N-phenylanthranilic acid (DPC), and niflumic acid (50-200 microM), known Cl- channel blockers, produced cellular acidification in control Ringer. Niflumic acid hyperpolarized Em and inhibited depolarization after Cl- removal. Western blot analysis failed to detect AE2 expression in cultured BCECs. However, fresh BCECs produced a trace response. CONCLUSIONS: Physiological activity of an apical anion exchanger is weak in cultured BCECs. Cultured BCECs have significant Cl- conductance. Thus, cellular alkalinization after Cl- removal is caused primarily by depolarization of Em, which drives HCO3- influx through the basolateral electrogenic Na+:nHCO3- cotransporter. In contrast with cultured BCECs, AE2 may be present in fresh cells.     

Molecular Aspects and Prognostic Significance of Microcalcifications in Human Pathology: A Narrative Review

The presence of calcium deposits in human lesions is largely used as imaging biomarkers of human diseases such as breast cancer. Indeed, the presence of micro- or macrocalcifications is frequently associated with the development of both benign and malignant lesions. Nevertheless, the molecular mechanisms involved in the formation of these calcium deposits, as well as the prognostic significance of their presence in human tissues, have not been completely elucidated. Therefore, a better characterization of the biological process related to the formation of calcifications in different tissues and organs, as well as the understanding of the prognostic significance of the presence of these calcium deposits into human tissues could significantly improve the management of patients characterized by microcalcifications associated lesions. Starting from these considerations, this narrative review highlights the most recent histopathological and molecular data concerning the formation of calcifications in breast, thyroid, lung, and ovarian diseases. Evidence reported here could deeply change the current point of view concerning the role of ectopic calcifications in the progression of human diseases and also in the patients’ management. In fact, the presence of calcifications can suggest an unfavorable prognosis due to dysregulation of normal tissues homeostasis.     

2-Layer Right Angle Crossing Drawings

A 2-layer drawing represents a bipartite graph where each vertex is a point on one of two parallel lines, no two vertices on the same line are adjacent, and the edges are straight-line segments. In this paper we study 2-layer drawings where any two crossing edges meet at right angle. We characterize the graphs that admit this type of drawing, provide linear-time testing and embedding algorithms, and present a polynomial-time crossing minimization technique. Also, for a given graph G and a constant k, we prove that it is $\mathcal{NP}$ -complete to decide whether G contains a subgraph of at least k edges having a 2-layer drawing with right angle crossings.