Vibrational analysis of functionalized polyolefins/poly(vinylchloride) blends

Polyolefins functionalized with diethylmaleate were mixed with poly(vinylchloride) (PVC) in different compositions. Intermolecular interactions involving the carbonyl groups of the side chains of the functionalized polyolefins and methine hydrogens of PVC were investigated by means of infrared spectroscopy. The major flexibility of the ester groups attached to the backbone chains, with respect to polyesters, seems to increase the capability of such groups to interact with groups of more polar polymers, thus allowing prediction of easier miscibility, which however also depends on the starting polyolefin structure and function-alization degree.     

Fault-accommodation with intelligent sensors

Optimal sensor fault-accommodation is considered for faults modelled by an increase in measurement noise. This noise is taken to be bounded and its probabilistic properties unknown. It is assumed that intelligent (e.g. self-validating) instrumentation is in use and estimates of the noise bounds are available. The fault-tolerant controller is designed to optimize a noise rejection and a nominal reference tracking index and leads to a mixed norm minimization problem (l₁/l₂). We exploit known results and a particular feedback configuration to show that it is possible to optimize simultaneously without a trade-off the two performance indices. The results are applied to systems where the presence of auxiliary measurements allows for an optimal fault-accommodation strategy. Using properties of the optimal solution, we define a factorization for the optimal controller alternative to the Youla parametrization, leading to an algorithm which is optimal, transparent and efficient.     

Pneumocystis carinii pneumonia in preterm infants: report of two cases successfully diagnosed by non-bronchoscopic bronchoalveolar lavage

We present two cases of Pneumocystis carinii pneumonia in apparently immunocompetent preterm infants presenting with unexplained respiratory distress associated with a predominantly interstitial process on the chest radiograph. Definite diagnosis was promptly established on the detection of cyst forms in the lung fluid obtained by non-bronchoscopic bronchoalveolar lavage, and a favourable outcome was achieved.     

Advanced field interpolation from plane-polar samples: experimentalverification

A new and advanced sampling technique far-field interpolation with a nonredundant number of samples on plane-polar geometry has been experimentally validated for cases of both complex and only-amplitude measurements. Experimental results show good stability of the interpolation algorithm with respect to noise and the lack of samples in the case of a limited scanning area     

Reconfigurable arrays by phase-only control

Due to space or cost reasons, a single array antenna can be required to radiate more than one pattern, each pattern being selected by an electronic control, in which only the phase can be modified. A synthesis method for such a problem that is able to determine both the common amplitude and the various phases in an integrated way is presented. Moreover, the approach is flexible enough to take into account additional constraints and allows an efficient implementation. Some test cases showing the effectiveness of the method are presented     

Thoracoscopic pleural tent

Lung volume reduction has been performed in patients with advanced emphysema to relieve dyspnea and improve exercise tolerance. Median sternotomy and video-assisted thoracoscopy have been proposed as equally adequate approaches; however, prolonged postoperative air leakage is the most prevalent complication in all series. For this reason, on the basis of the experience achieved with the median sternotomy approach, buttressing of the suture line with different materials and techniques for space reduction have been proposed. We describe a technique to create a pleural tent after thoracoscopic volume reduction. The thoracoscopic creation of a pleural tent is feasible and results in a duration of postoperative air leaks and hospital stays similar to that achieved with stapler line buttressing.     

2-Layer Right Angle Crossing Drawings

A 2-layer drawing represents a bipartite graph where each vertex is a point on one of two parallel lines, no two vertices on the same line are adjacent, and the edges are straight-line segments. In this paper we study 2-layer drawings where any two crossing edges meet at right angle. We characterize the graphs that admit this type of drawing, provide linear-time testing and embedding algorithms, and present a polynomial-time crossing minimization technique. Also, for a given graph G and a constant k, we prove that it is $\mathcal{NP}$ -complete to decide whether G contains a subgraph of at least k edges having a 2-layer drawing with right angle crossings.     

Hybrid materials based on metal oxides and poly(organophosphazenes)

In this paper the sol-gel preparation of hybrid materials made of metal oxide and polytorganophosphazenel components is described. The main problem focused on during this research was to avoid phase separation in order to get homogeneous materials. This problem was pursued looking at the formation of genuine chemical bonds between the exploited polyphosphazenes and the inorganic composite networks. Investigations on the thermal, mechanical, and electroconductive properties of the synthesized, phosphazene-containing composite materials showed that these matrices presented improved mechanical and thermal features with respect to those of the original phosphazene macromolecule, while the ionic conductivities of the prepared molecular hybrids doped with lithium or silver trillate are of the same order of magnitude as those measured for the neat, original phosphazene substrate.Presented at the Ist Italian Workshop on Cyclo- and Polytphosphazenel Materials. February 15–16, 1996. at the CNR Research Area in Padova, Italy.     

Role of anionic and nonionic surfactants on the control of particle size and latex colloidal stability in the seeded emulsion polymerization of butyl methacrylate

The evolution of the main colloidal parameters in the seeded starved‐feed semi‐continuous emulsion polymerization of butyl methacrylate (BMA) was investigated, with the main purpose of assessing the effectiveness of the semi‐empirical relationship S = K · S_S · ΔA/A_S as a tool to define the surfactant/monomer feed ratio (∝ K) best suited to achieve a target particle size. In particular, the effect of the type and amount of surfactant [i.e., anionic, sodium dodecyl sulfate (SDS), or nonionic, Brij 58P] added during the semi‐continuous stage was considered. Coagulum formation was never observed under the adopted experimental conditions. To detect the occurrence of secondary nucleation or particle aggregation, or both, the particle size and number of particles, the surface tension and the particle surface coverage ratio were correlated. The best results were obtained with SDS and 0.8 ≤ K ≤ 3. In fact, under the selected experimental conditions, only with SDS did the number of particles remain nearly constant throughout the polymerization at the value defined by the seed latex; the particle size distribution was highly monodisperse, and the final particle diameter closely matched the calculated one (～ 120 nm). The above semi‐empirical relationship based on the adjustable parameter K was validated by running test polymerizations aimed at lattices with well‐defined particle size. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3083–3094, 2006     

Lymphocyte subpopulations of workers in a plant producing plastic materials (preliminary study)

Lymphocyte subpopulations were studied in 31 men working in a plant producing plastic materials in relation with control groups of similar age and smoking habit. 8 workers (group A) were exposed to solvents (mainly methylethylketone and dimethylformamide), 8 men (group B) to dust containing particles of calcium carbonate, polyvinylchloride, phtalates, unsaturated oils, paraffin wax, iron oxides, titanium bioxides, barium, zinc and lead and 15 men (group C), working in the same department as group B, were studied after a period of 16 months during which lead chromate was employed in the preparation of colors. The lymphocyte subpopulations were normal in group A, while in B there was a significant increase of HLA-DR + cells (monocytes, B and activated T lymphocytes). In group C, T helper/inducer lymphocytes (mainly CD4(+)-CD45RO- "virgin" lymphocytes), CD19+ B lymphocytes, CD3-HLADR+ and CD3-CD25+ (activated B lymphocytes and monocytes) were significantly reduced without changes of serum IgM, IgG and IgA. Highly significant correlation was found between B lymphocytes (reduced in the workers about 40%) and CD4(+)-CD45R0+ "memory" lymphocytes (reduced about 20%). Moreover, blood lead (correlated with urinary chromium) showed a highly significant negative correlation with the B lymphocytes. This study demonstrates that combined exposure to toxic agents produces specific modifications in the lymphocyte subsets without changes in immunoglobulins and confirms the results of previous researches showing that the exposure to lead or chromate induces reduction of lymphocytes in the peripheral blood.