Formation of Porous SiC Ceramics by Pyrolysis of Wood Impregnated with Silica

Biomorphous β-SiC ceramics were produced at 1400°C from pine wood impregnated with silica. This one-step carbothermal reduction process decreases the cost of manufacturing of SiC ceramics compared with siliconization of carbonized wood in silicon vapor. The synthesized sample exhibits a 14 m²/g surface area and has a hybrid pore structure with large 5–20 μm tubular macropores and small (<50 nm) slit-shaped mesopores. SiC whiskers of 20–400 nm in diameter and 5–20 μm in length formed within the tubular pores. These whiskers are expected to improve the filtration by removing dust particles that could otherwise penetrate through large pores. After ultrasonic milling, the powdered sample showed an average particle size of ∼30 nm. The SiC nanopowder produced in this process may be used for manufacturing SiC ceramics for structural, tribological, and other applications.     

Polymerization of monomers initiated by silyl centers in SiO deposits prepared by pulsed laser ablation

Deposits from silicon monoxide prepared by pulsed laser ablation were allowed to react with acrylic and vinyl monomers—styrene, methyl methacrylate and 1,2 ethylene glycol dimethacrylate. It was revealed by means of FTIR, electron paramagnetic resonance (EPR), and NMR spectroscopies that silyl ?Si· reacts with monomer molecules and initiates the consecutive polymerization. Crosslinking is proved by the occurrence of bending δ(? CH₂) absorption peak at about 750 cm^?1 in FTIR spectra. Because of very low concentration of the propagating radical for styrene we used a radical scavenger N‐phenyl‐t‐butylnitrone for trapping. The measured EPR parameters were compared with the calculated ones. In case of styrene, NMR analysis manifested the presence of Si? C bonds in SiC_xO_y (x + y = 2) units, which can be taken as direct evidence of the reaction between silyl centers and monomer molecules. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4488–4492, 2006     

Analysis of Inhomogeneous Optical Systems by the Use of Ray Tracing. II. Three-dimensional Systems with Symmetry

We describe a new approach to the index reconstruction of three-dimensional optical systems with rotational symmetry, which is based on sampling ray paths that lie in the sagittal plane. Since the observed rays are distorted by the optical system itself, they cannot be used directly for index reconstruction. We present an iterative procedure to compute the true ray paths and then to find the index distribution. The utility of the method is verified on the model problem.     

Preparation of an exponentially rising optical pulse for efficient excitation of single atoms in free space

We report on a simple method to prepare optical pulses with exponentially rising envelope on the time scale of a few ns. The scheme is based on the exponential transfer function of a fast transistor, which generates an exponentially rising envelope that is transferred first on a radio frequency carrier, and then on a coherent cw laser beam with an electro-optical phase modulator. The temporally shaped sideband is then extracted with an optical resonator and can be used to efficiently excite a single (87)Rb atom.     

One‐Step Formulation of Protein Microparticles with Tailored Properties: Hard Templating at Soft Conditions

Formulation of therapeutic proteins into particulate forms is a main strategy for site‐specific and prolonged protein delivery as well as for protection against degradation. Precise control over protein particle size, dispersity, purity, as well as mild preparation conditions and minimal processing steps are highly desirable. It is, however, hard to fit all these criteria with conventional preparation techniques. Here a one‐step hard‐templating synthesis of microparticles composed of functional, non‐denatured protein is reported. The method is based on filling porous CaCO₃ microtemplates with the protein near to its isoelectric point (pI) followed by pH‐ or EDTA‐mediated dissolution of the tempplates. In principle, a wide variety of proteins can be converted into microparticles using this approach. The main requirement is an overlap of the protein insolubility and a template solubility for a certain parameter (here pH or EDTA). Here the formulation of insulin particles is studied in detail and it is shown that particles consisting of high molecular weight protein (catalase) can also be prepared. In this context, the synthesis of CaCO₃ templates with controlled size, the mechanism of the protein microparticle formation and mechanical properties of the microparticles are discussed. For the first time, the fabrication of mesoporous monodispersed CaCO₃ microtemplates with identical porocity but tuned diameter from 3 to 20 μm is demonstrated. The protein particle diameter can be adjusted by choosing the appropriate template size that is critical for successful pulmonary delivery of insulin. As a first step towards insulin delivery, the in vitro release of insulin at physiological conditions is studied.     

Density estimates on the unit simplex and calculation of the mode of a sample

This paper addresses reliable and efficient calculation of the mode of a multivariate sample, which is a classical fusion function. In particular, we focus on the inputs given on the unit simplex, when aggregating elements of Atanassov intuitionistic fuzzy sets, interval-valued fuzzy sets and their extensions, as well as compositional data. We outline the use of a specially designed 2-additive fuzzy measures and the Choquet integral for the purposes of reducing computational complexity in higher dimensions. We present computational analysis and benchmark four different methods of density-based mode estimation.     

Use of photodegradable inhibitors in UV-curable compositions to form polymeric 2D-structures by visible light

The process of two-wave photopolymerization of a UV-curable composition with an optically degrading inhibitor is considered. By numerical simulation, it is shown that in the composition layer uniformly exposed to UV-radiation, such systems allow getting segments with different conversion under the action of inhomogeneous visible light. Based on the data on the photopolymerization kinetics of the compositions from triethylene glycol dimethacrylate (TEGDMA) and bisphenol-A glycidyl dimethacrylate (bis-GMA) with the UV-initiator 2,2-dimethoxy-2-phenylacetophenone (DMPA), it was shown that 3,5-di-tert-butyl-o-benzoquinone (35Q) with N,N-dimethylaniline (DMA, “Aldrich”, 99%) can serve as an inhibitor that degrades under action of visible radiation. Combining inhomogeneous visible light generated with a conventional DLP-projector and uniform UV-radiation of LED (365 nm) the two-wave lithographic process was implemented to create polymeric 2D-structures in 20 μm layer of the compositions from TEGDMA (70)/bis-GMA (30)/DMPA (0.05 wt%)/35Q (0.5 wt%)/DMA (1 wt%).     

A cubic ordered, mesoporous carbide-derived carbon for gas and energy storage applications

A hierarchical and highly porous carbide-derived carbon (CDC) was obtained by nanocasting of pre-ceramic precursors into cubic ordered silica (KIT-6) and subsequent chlorination. Resulting CDC replica materials show high methane and n-butane uptake and excellent performance as electrode materials in supercapacitors.