Structural silicone sealants after exposure to laboratory test for durability assessment

During the service life of structural sealant glazing (SSG) facades, the load-bearing capacity of the silicone bonds needs to be guaranteed. Laboratory tests can assess the durability of SSG-systems based on mechanical characteristics of the bond after simultaneous exposure to both climatic and mechanical loads. This article studies how the material characteristics of two common structural sealants are affected by laboratory and field exposure. Dynamic mechanical analysis (DMA) confirms a reduction in the dynamic modulus of exposed silicone samples. Results from thermogravimetric analysis, Fourier-transform infrared spectroscopy, differential scanning calorimetry, and small-angle X-ray scattering/wide-angle X-ray scattering show differences between the two sealants and indicate no/minor changes in the composition and morphology of the laboratory and field exposed sealants. Mechanical characterization methods, such as DMA, and tensile and shear testing of the structural bond, are shown to be sensitive toward the combined climatic and mechanical loadings, and are hence suitable for studying degradation mechanisms of structural sealants.     

A Composite Index of Compliance for Chronic In‐Center Hemodialysis Patients

We developed a composite compliance index as the sum of the compliance scores for interdialytic weight gain (IDWG), pre‐dialysis serum potassium and phosphorus concentrations (each scored from zero to 3, with 3 indicating the poorest compliance), and skipping hemodialysis sessions (scored from zero to 9, with 9 indicating the poorest compliance). We used this composite score to prospectively evaluate compliance in 25 prevalent hemodialysis patients over a period of 1 year. We then followed these patients for another 3.5 years. The patients studied were divided into two groups: group A (poor compliance) consisted of 9 subjects with composite score ≥ 9 (13.2 ± 3.2); group B (better compliance) consisted of 16 subjects with composite score < 9 (4.7 ± 1.8). Age, duration of hemodialysis, and frequency of diabetes mellitus did not differ between the groups. Group A contained higher fractions of subjects with history of alcoholism (66.7% vs 12.5%, p = 0.010), other substance addiction (44.4% vs 0%, p = 0.010), and severe psychosocial problems (88.9% vs 18.8%, p = 0.002). Mean survival from the beginning of observation, estimated by actuarial life‐table survival analysis, was 1.19 years in group A and 2.60 years in group B (p = 0.0265). A composite compliance index incorporating domains indicating adherence to diet, medications, and dialysis schedule identified other behavioral problems in poorly compliant patients. Hemodialysis patients characterized by this composite index as poorly compliant had shortened survival.     

The multicultural perspective in therapy: A social constructionist approach.

Discusses the theoretical and clinical applications of the postmodern paradigm of social constructionism as a basis for counseling culturally different clients. Such applications avoid the trap of perpetuating the status-quo when working with minority and marginalized clientele. The main points of multiculturalism and social constructionism are summarized, and issues of mutual concern to both perspectives are examined. Applications to psychotherapy are explored, and the challenges of applying the social constructionist approach to culturally competent counseling are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Do We Stand on Common Ground? A Threat Appraisal Model for Terror Alerts Issued by the Department of Homeland Security

The fabric and faces of threat, and the expediency and efficiency in the communication of threat, are examined with a threat appraisal model. This model is empirically tested on an ongoing communication challenge, the issuance of terror alerts by the United States' Department of Homeland Security (DHS), focusing on how threat is appraised by both the conservative and liberal audiences. Findings showed a shared view by the DHS and conservative audiences on the levels and nature of threats; liberal audiences thought otherwise. Though there appeared to be a consensus between the conservative and liberal audiences on the efficacy of threat communication, more internal consistency within DHS is needed to optimise its effectiveness.     

Fire evacuation skills: Cognitive-behavioral versus computer-mediated instruction

Fifty-six fourth-grade children participated in this study to assess three training procedures for relative effectiveness in acquiring fire emergency skills and attaining knowledge. The first training approach was behavioral, the second used animated graphics, and the third used still graphics. Each of the training groups was compared to a control group that received no treatment. Performance on dependent measures was assessed before and immediately after training. It was hypothesized that the behavioral and animated-graphics conditions would produce the greatest level of skill and knowledge acquisition. Results demonstrated a significantly higher level of fire emergency skill acquisition and knowledge attainment for both the behavioral and animated-graphics groups relative to the still-graphics group and the control group, which had no training. The value of using computer-mediated strategies for fire-safety skills training was demonstrated.     

Preparation of Silicon Carbide/Aluminum Nitride Ceramics Using Organometallic Precursors

Solid solutions of 2H -SiC/AlN can be prepared at temperatures less than 1600°C by rapid pyrolysis ("hot drop") of mixtures of [(Me₃Si)_0.80((CH₂=CH)MeSi)_1.0(MeHSi)_0.35] _n (VPS) or [MeHSiCH₂] _n (MPCS) with [R₂AlNH₂]₃, where R=Et, i -Bu or simply by slow pyrolysis of the precursor mixture in the case of [Et₂AlNH₂]₃. In contrast, slow pyrolysis of mixtures of VPS or MPCS with [ i -Bu₂AlNH₂]₃ yields a composite of 2 H -AlN and 3 C -SiC at 1600°C, which transforms into a single 2 H -SiC/AlN solid solution on heating to 2000°C. The influences of the nature of the precursor and processing conditions on the structure, composition, and purity of the SiC/AlN materials are discussed.     

Raman spectroscopic analysis of thecis/trans isomer composition of edible vegetable oils

A new method is presented for determining thecis/trans isomer content of edible vegetable oils. The intensities of Raman lines near 1656 and 1670 cm⁻¹ are associated with thecis andtrans configuration, respectively. A precision of ca. 1% can be obtained in thecis/trans isomer analysis of binary mixtures of methyl esters and triglycerides of monoenes and dienes and of hydrogenated vegetable oils. The spectroscopic data also provide the iodine value of vegetable oils or isolated fractions with precision for a single determination of ca. 1%. Presented at the AOCS meeting, Houston, May 1971. W. Market. Nutr. Res. Div., ARS, USDA.     

Influence of thickness and processing history on fatigue fracture of nylon 66. Part II: Crack tip morphology

Fatigue crack propagation rates in injection molded nylon 66 were previously shown to be strongly affected by prior processing history. To provide a physical basis for the observed acceleration in crack growth rates, microtomed sections were cut through the tips of stable fatigue cracks and examined by optical microscopy. A reduction in spherulite size occurs with reprocessing along with an accompanying decrease in the amount of deformation at the crack tip. For the initially processed nylon 66 this deformation consists of a vast array of independently initiated craze-like zones. Patchy type regions observed on the fatigue fracture surface are similar in size to the initially formed crazed zones. Crack advance occurs by the breakdown and coalescence of the crazed regions via matrix shearing. The extensive damage zone is believed to result in a reduction in stress intensity at the crack tip thereby reducing the crack propagation rates. For the reprocessed nylon 66, one observes fewer crazes and a sharper fatigue crack tip with a consequent acceleration in crack propagation rates and a smoother fracture surface.