Heat Transfer Analysis for Gas-to-Liquids Transportation Through Trans Alaska Pipeline

Gas-to-liquids (GTL) technology involves the conversion of natural gas to liquid hydrocarbons. In this article, theoretical studies have been presented to determine the feasibility of transporting GTL products through the Trans-Alaska Pipeline System (TAPS). To successfully transport GTL through TAPS, heat loss along the route must be carefully determined. This study presents heat transfer and fluid dynamic calculations to evaluate this feasibility. Because of heat loss, the fluid temperature decreases in the direction of flow and this affects the fluid properties, which in turn influence convection coefficient and pumping power requirements. The temperature and heat loss distribution along the pipeline at different locations have been calculated. Fairly good agreement with measured oil temperatures is observed. The powers required to pump crude oil and GTL individually, against various losses have been calculated. Two GTL transportation modes have been considered; one as a pure stream of GTL and the second as a commingled mixture with crude oil. These results show that the pumping power and heat loss for GTL are less than that of the crude oil for the same volumetric flow rate. Therefore, GTL can be transported through TAPS using existing equipment at pump stations.     

Using Automated Negotiation for Grid Services

The popularity of grid services has widened their application to numerous domains and increased the utilization of computational resources. In order to create more incentives for the resources owners to lease their resources and prevent users from wasting the resources, the introduction of a market-oriented grid is inevitable. However, the issues for the negotiation between service provider and consumer over the supply and demand of resources can be complex, with highly interdependent issues. In this research, a simulated automated negotiation mechanism including a co-evolutionary mechanism and a modified game theory approach is proposed, to assist them in reaching an agreement over the conflicting issues. In the proposed architecture, the co-evolution process is able to reduce the multiple dimensional search space into a two-dimension search space and identify the appropriate negotiation strategies for the negotiating agents to form a payoff matrix which can be used for the game theory related stage of their interaction. The multiple stage negotiation process is introduced to improve the negotiation result. In this paper, an application which requires a large amount of computational resources to process the data generated from mobile devises is used to demonstrate that the proposed system is able to resolve the conflicts and obtain a valid solution.     

Host selection byBlepharipa pratensis (Meigen), a tachinid parasite of the gypsy moth,Lymantria dispar L.

The host selection process ofBlepharipa pratensis (Meigen), a tachinid parasite of the gypsy moth,Lymantria dispar L., was investigated. Once in the host's habitat, and following contact with a recently damaged leaf edge (cut, torn, eaten), the fly orients perpendicular to the edge and moves back and forth with the front tarsi grasping the damaged edge. Oviposturing (oviposition intention) may occur. Leaf exudates appear to arrest the fly on the leaf and increase tarsal examination (searching). If an edge of a gypsy moth-eaten leaf is contacted, oviposition usually occurs. Significantly more eggs are laid when host-browsed foliage is encountered, compared to mechanically cut or damaged foliage, indicating response to a cue left by the host during feeding. The number of host-damaged leaf clusters in an area significantly enhances oviposition there; in field-cage tests, significantly more eggs (7911) were laid in simulated-crown areas with all clusters browsed, compared to the adjacent areas containing 1/2 browsed (4200 eggs) and undamaged clusters (2209 eggs). A host selection sequence is suggested and discussed.     

Using SERVQUAL to assess the quality of e-learning experience

Distance learning programs have been dramatically expanding in accordance with demand. Assessment of the quality of e-learning has become a strategic issue, one that is critical to program survival. In this study we propose a modified SERVQUAL instrument for assessing e-learning quality. The instrument consists of five dimensions: Assurance, Empathy, Responsiveness, Reliability, and Website Content. Data analysis from 203 e-learning students shows that four out of these five dimensions (except Reliability) play a significant role in perceived e-learning quality, which in turn affects learners’ satisfaction and future intentions to enroll in online courses. Managerial implications of the major findings are provided.     

Impact of oxygenated cottonseed biodiesel on combustion,performance and emission parameters in a direct injection CI engine

In the present study, biodiesel production from the crude cotton-seed oil (CSO) and its feasibility to be used as fuel in compression ignition engine was analysed. Single-stage transesterification at molar ratio of 8:1 on crude CSO yielded 94% of cottonseed biodiesel (CBD). Gas chromatogram/mass spectrometry analysis revealed the presence of 19.5% unsaturated and 80.5% saturated esters in cotton seed biodiesel. Taguchi approach identified the stable fuel blend with oxygenate concentration. Increased oxygen concentration up to 20% were also analysed to understand the variation. Higher peak in-cylinder pressure was observed in D80CBD20 fuel blend. Diesel–biodiesel blend with oxygenate significantly affected the ignition delay and also resulted in varied exhaust gas temperature. D80CBD20nB10 showed an increase in brake thermal efficiency, whereas D80CBD20 exhibited higher brake specific energy consumption at full load. Carbon monoxide, hydrocarbon and smoke emission was found to be high in diesel with higher oxides of nitrogen in D80CBD20nB10. This experimental investigation finally revealed that, D80CBD20nB10 improved the combustion and performance characteristics with minimal emissions.

Abbreviations ASTM: American Society for Testing and Materials; BP: brake power; BSEC: brake specific energy consumption; BTE: brake thermal efficiency; CBD: cottonseed biodiesel; CI: compression ignition; CO: carbon monoxide; CO₂: carbon dioxide; CSO: cottonseed oil; DEE: diethyl ether; DOE: design of experiments; EGT: exhaust gas temperature; FTIR: Fourier transform infrared spectrometry; GC/MS: gas chromatogram/mass spectrometry; HC: hydrocarbon; HRR: heat release rate; HSDI: high speed direct injection; IDI: indirect injection; KOH: potassium hydroxide; MFB: mass fraction burned; NaOH: sodium hydroxide; NMR: nuclear magnetic resonance; N₂O: nitrous oxide; NO: nitric oxide; NO₂: nitrogen dioxide; NO _x : oxides of nitrogen; ROHR: rate of heat release; ROPR: rate of pressure rise; SOC: start of combustion; aTDC: after top dead centre; bTDC: before top dead centre     

A simplified couette flow solution of non-newtonian power-law fluids in eccentric annuli

Flow of non-Newtonian fluids in both the concentric and eccentric annuli is of great importance in extruders for molten plastics and wellbore fluid circulation for the removal of drilling cuttings. The steady laminar couette flow of non-Newtonian power-law fluids in eccentric annulus is employed in this study to analyze the problems of surge or swab pressures encountered when running or pulling tubular goods (pipes) in a liquid filled borehole. This is similar to the annular space created by two long co-axial cylinders with the inner cylinder in motion at a steady velocity, and a stationary outer cylinder. The solutions of the equations of motion are presented in both dimensionless form and as a family of curves for different pipe/borehole eccentricity ratios and power-law fluid index values for a more general application. The expected error in surge computation for concentric annulus as a result of eccentricity is evaluated.     

Prevalence and Antimicrobial Resistance of Cronobacter sakazakii Isolated from Domestic Kitchens in Middle Tennessee, United States

Cronobacter sakazakii is an emerging opportunistic pathogen that has been implicated in cases of severe meningitis, sepsis, and necrotizing enterocolitis in premature and full-term infants. In this study, the prevalence of C. sakazakii was estimated in selected domestic kitchens in middle Tennessee. Antimicrobial resistance patterns of these C. sakazakii isolates were examined for points of public health significance. A total of 234 contact sites in 78 domestic kitchens were tested for C. sakazakii. Consumers' used dishcloths and cleaning sponges were also tested. Antimicrobial susceptibility of the identified C. sakazakii isolates was determined for 10 antimicrobial drugs by means of the disk diffusion method. C. sakazakii was recovered from 26.9% of domestic kitchens visited. Multidrug resistance was observed; the highest resistance was to penicillin (76.1% of isolates) followed by tetracycline (66.6%), ciprofloxacin (57.1%), and nalidixic acid (47.6%). None of the C. sakazakii isolates were resistant to gentamicin. These results suggest that antibiotic-resistant C. sakazakii could be present at various sites in domestic kitchens.     

Air exchange rates and migration of VOCs in basements and residences

Basements can influence indoor air quality by affecting air exchange rates (AERs) and by the presence of emission sources of volatile organic compounds (VOCs) and other pollutants. We characterized VOC levels, AERs, and interzonal flows between basements and occupied spaces in 74 residences in Detroit, Michigan. Flows were measured using a steady‐state multitracer system, and 7‐day VOC measurements were collected using passive samplers in both living areas and basements. A walk‐through survey/inspection was conducted in each residence. AERs in residences and basements averaged 0.51 and 1.52/h, respectively, and had strong and opposite seasonal trends, for example, AERs were highest in residences during the summer, and highest in basements during the winter. Airflows from basements to occupied spaces also varied seasonally. VOC concentration distributions were right‐skewed, for example, 90th percentile benzene, toluene, naphthalene, and limonene concentrations were 4.0, 19.1, 20.3, and 51.0 μg/m³, respectively; maximum concentrations were 54, 888, 1117, and 134 μg/m³. Identified VOC sources in basements included solvents, household cleaners, air fresheners, smoking, and gasoline‐powered equipment. The number and type of potential VOC sources found in basements are significant and problematic, and may warrant advisories regarding the storage and use of potentially strong VOCs sources in basements.     

Porosity and permeametry at sub-atmospheric pressures

The Carman-Kozeny equation is applicable in the viscous flow regime but, as the powder becomes finer, this equation fails. The controlling factor is the ratio of the hydraulic diameter to the mean free path of gas molecules (r_H/λ) and, as this approaches unity, “slip flow” occurs. This effect increases with (a) increasing fineness, i.e. r_H reduced, (b) decreasing porosity, i.e. r_H reduced, and (c) decreasing pressure, i.e. λ increased. In order to account for the enhanced flow arising as a result of this failure, a second term is introduced into the equation and this includes an unknown “constant” (δK₀/K), the coefficient of slip. It was considered probable that this so-called constant was a function of (r_H/λ), and an attempt was made to investigate this relationship.