Metal-insulator-semiconductor solar cell under gamma irradiation

The performance of a home made MIS–p-Si solar cell was experimentally studied under various gamma irradiation doses (up to 500 Mrad). The effect of radiation dose on the I−V and C−V characteristics was investigated in this work. The obtained results showed that all the output parameters of the cells under investigation were degraded with gamma radiation exposure. In addition, the effects of fabrication conditions (metal thickness and adding of antireflection coating) on the cell output parameters were also investigated.     

A wide axial-ratio beamwidth circularly-polarized oval patch antenna with sunlight-shaped slots for gnss and wimax applications

Wireless Networks - This paper proposes a quadruple band stacked oval patch antenna with sunlight-shaped slots supporting L1/L2/L5 GNSS bands and the 2.3 Ghz WiMAX band. The antenna produces...     

Effect of exchanging PbO with NiO on the structure and optical parameters action of some lanthanum borate oxide glasses

Journal of Materials Science: Materials in Electronics - This work is an attempt to estimate the effect of the exchanging of PbO with NiO on the optical and structural parameters for some...     

Impact of graphite impurities on the structure and optical properties of the sodium borate oxide glass

For the carbon-based glass fabrication/manufacture process, different amounts of pure graphite powder were added up to 100 wt.% of sodium tetraborate oxide (the weight of one mole of the sodium tetraborate is 381.372 g/mol) and then melted at 950 °C for 2 h before fast quenching in the air at RT. The resulted solids were examined by the XRD and SEM techniques, which confirmed the amorphous natures for studied samples. FTIR spectroscopy showed that some C-atoms are shared in the glass network as C–O and CO₂. In contrast, the UV–Vis showed that the increase in the graphite contents/impurities causes a red shift in the value of the optical edge and the value of Fermi energy. Also, the increase of the graphite impurities causes a decrease in the bandgap values of both direct and indirect electronic transitions. Both the values of Urbach energy and the metallization indicated an increase in the crystallinity degree as the graphite content increase. A graphite-based glass is a promising material for wide-scale applications.

     

Inhibition of heterocyclic aromatic amine formation in fried ground beef patties by garlic and selected garlic-related sulfur compounds

The effects of garlic and selected organosulfur compounds (diallyl disulfide, dipropyl disulfide, diallyl sulfide, allyl methyl sulfide, allyl mercaptan, cysteine, and cystine) on the formation of heterocyclic aromatic amines (HAAs) in fried ground beef patties were evaluated. Minced garlic cloves (ca. 4.8 to 16.7%, wt/wt) or organosulfur compounds (0.67 mmol) were added directly to ground beef. Patties (100 g) were fried at 225 degrees C (surface temperature) for 10 min per side. Two patties were fried for each replication, and five replicates were analyzed for each treatment. For each replicate, four subsamples were analyzed (two unspiked subsamples for concentration and two spiked subsamples for the recovery of HAA standards). The volatile sulfur compounds significantly (P < 0.05) reduced concentrations of 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine by reductions of 46 to 81%, while average reductions of 35, 22, and 71%, were achieved with cystine, cysteine, and whole garlic, respectively. The volatile sulfur compounds reduced concentrations of 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline by 34 to 67%, while reductions of 25, 19, and 63% (P < 0.05) were achieved with cystine, cysteine, and whole garlic, respectively. These studies confirm that garlic and some organosulfur compounds have the potential to reduce HAA formation incooked beef patties.     

Factorial design analysis for dye-sensitized hydrogen generation from water

A factorial design at two levels and four factors has been carried out in order to investigate the potential for hydrogen generation using Eosin Y-sensitized TiO₂/Pt catalyst under visible solar light in presence of triethanolamine (TEOA) as electron donor. The solution pH was found to be a significant parameter, and was maintained at pH 7.0 throughout the investigation. Visible light irradiation time (I-time) showed highest positive effect on hydrogen generation followed by initial Eosin Y concentration (for dye-sensitization) and the TEOA concentration while Pt content (wt %) in TiO₂ showed negative effect toward hydrogen generation. Experimental data were analyzed using both “Pareto analysis” as well as conventional regression analysis techniques. A regression function is proposed that satisfactorily predicts hydrogen generation.     

Effect of surfactants on the corrosion of amorphous 76Ni-24P alloy in neutral solutions

76Ni-24P amorphous alloys have been electrodeposited from solutions containing sodium lauryl sulphate (SLS) and triton-X 100 (TX-100) to improve the surface quality of the specimens. Corrosion behaviour of electrodeposited amorphous alloys in sulphate and chloride solutions at 25°C has been studied by potential-time decay, linear polarization resistance and potentiodynamic techniques. Anodic polarization curves show that the specimens exhibit mild passivity at potentials between approximately ?200 mV and 200 mV (SCE) and dissolve transpassively above 200 mV (SCE). The sulphate solution was found to increase the dissolution of the samples treated by the surfactants during the substrate brass plating. The nonanionic surfactant increases the corrosion current by 10 times compared to the anionic one which enhances the current by 400 times; the interpretation was based on the enhanced dissolution of the microcrystals of the specimens in the sulphate solution and to the steric hindrance of the surfactants. In addition, the alloys are more resistant to chlorides due to the formation of a phosphate/hypophosphite film which protects the surface from dissolution.     

Gas liquid contacting in reciprocating plate columns: I. hydrodynamics

The hydrodynamic characteristics of a 10-cm reciprocating plate column used for counter-current gas-liquid contacting was investigated. The values of gas holdup, interfacial area and maximum throughputs achievable in this unit put it in a favourable position in comparison with other types of contactors.