Nile blue adsorbed onto silica gel modified with niobium oxide for electrocatalytic oxidation of NADH

A study of modified carbon paste electrode employing Nile blue (NB) adsorbed on silica gel modified with niobium oxide (SN) for electrocatalytic oxidation of reduced nicotinamide adenine dinucleotide (NADH) is described. The adsorbed organic dye on SN was used to prepare a modified carbon paste electrode to investigate its electrochemical properties. The formal potential (E°′) of the adsorbed NB (−230 mV vs. saturated calomel electrode, SCE) showed a shift of 70 mV towards a more positive potential value, compared to NB dissolved in aqueous solution. In solutions with pH between 6.0 and 8.0 did stability and E°′ remained almost constant. However, for a solution pH lower than 6.0 the E°′ was affected by the acidity of the contacting solution, shifting the E°′ towards more positive values. For the solution pHs between 6.0 and 8.0 the electrocatalytic activity remained almost constant. A linear response range for NADH between 1.0×10⁻⁵ and 5.2×10⁻⁴ mol l⁻¹, at pH 7.0, was observed for the electrode, with an applied potential of −200 mV versus SCE. The formation of an intermediate charge transfer (CT) complex was proposed to the CT reaction between NADH and adsorbed NB. The heterogeneous electron transfer rate, k_obs, was 1400 M⁻¹ s⁻¹ and the apparent Michaelis-Menten constant, was 0.21 mM at pH 7.0 evaluated from rotating disk electrode (RDE) experiments with an electrode coverage of about 5.2×10⁻⁹ mol cm⁻². The increase in the reaction rate between NADH and the immobilized NB compared to those obtained with dissolved NB was assigned to the shift of the E°′ towards more positive values.     

Data-Intensive Computing in the 21st Century

The deluge of data that future applications must process—in domains ranging from science to business informatics—creates a compelling argument for substantially increased R&D targeted at discovering scalable hardware and software solutions for data-intensive problems.     

An extensible and lightweight architecture for adaptive server applications

Server applications augmented with behavioral adaptation logic can react to environmental changes, creating self‐managing server applications with improved quality of service at runtime. However, developing adaptive server applications is challenging due to the complexity of the underlying server technologies and highly dynamic application environments. This paper presents an architecture framework, the Adaptive Server Framework (ASF), to facilitate the development of adaptive behavior for legacy server applications. ASF provides a clear separation between the implementation of adaptive behavior and the business logic of the server application. This means a server application can be extended with programmable adaptive features through the definition and implementation of control components defined in ASF. Furthermore, ASF is a lightweight architecture in that it incurs low CPU overhead and memory usage. We demonstrate the effectiveness of ASF through a case study, in which a server application dynamically determines the resolution and quality to scale an image based on the load of the server and network connection speed. The experimental evaluation demonstrates the performance gains possible by adaptive behavior and the low overhead introduced by ASF. Copyright © 2007 John Wiley & Sons, Ltd.     

Rate-limiting steps of tyrosinase-modified electrodes for the detection of catechol

The response currents obtained for tyrosinase-modified Teflon/graphite, carbon paste, and solid graphite electrodes in the presence of catechol are analyzed primarily using rotating disk electrode experiments. The rate-limiting steps, such as the electrochemical reduction of o-quinones and the enzymatic reduction of oxygen as well as the enzymatic oxidation of catechol, are theoretically considered and experimentally demonstrated for the different electrode configurations.     

Rapid and direct determination of fructose in food: A new osmium-polymer mediated biosensor

This paper describes the development and performance of a new rapid amperometric biosensor for fructose monitoring in food analysis. The biosensor is based on the activity of fructose dehydrogenase (FDH) immobilised into a carbon nanotube paste electrode according to two different procedures. The direct wiring of the FDH in a highly original osmium-polymer hydrogel was found to offer a better enzyme entrapment compared to the immobilisation of the enzyme in an albumin hydrogel. The optimised biosensor required only 5 U of FDH and kept the 80% of its initial sensitivity after 4 months. During this time, the biosensor showed a detection limit for fructose of 1 μM, a large linear range between 0.1 and 5 mM, a high sensitivity (1.95 μA cm⁻² mM), good reproducibility (RSD = 2.1%) and a fast response time (4 s).     

Biosensor based on cellobiose dehydrogenase for detection of catecholamines

A cellobiose dehydrogenase (CDH)-modified graphite electrode was designed for amperometric detection of catecholamines in the flow injection mode, by their recycling between the graphite electrode (+300 mV vs Ag|AgCl) and the reduced FAD cofactor of adsorbed CDH, resulting in an amplified response signal. The high efficiency of the enzyme-catecholamine reaction leads to a detection limit below 1 nM and a sensitivity of 15.8 A.M(-1) x cm(-2) (approximately 1150 nA/microM) for noradrenaline, with a coverage of less than 2.5 microg of CDH adsorbed on the electrode surface (0.073 cm(2)). Working parameters such as pH, cellobiose concentration, carrier buffer, and applied potential were optimized, using hydroquinone as a model analyte. The sensitivity, linear range, and amplification factor can be modulated by the steady-state concentration of cellobiose in the flow buffer. The response of the sensor decreases only 2% when run continuously for 4 h in the flow injection mode. The response peak maximum is obtained within 6 s at a flow rate of 0.5 mL/min, representing the time of the entire sample segment to pass the electrode. CDH enzymes from Phanerochaete chrysosporium and Sclerotium rolfsii were investigated, providing different characteristics of the sensor, with sensors made with CDH from P. chrysosporium being the better ones.     

Interfacing transputer links to external devices

Two approaches to interfacing transputers to external circuitry are considered. The design and construction of both a serial and a parallel interface for transputers is described. These enable transputers to communicate with peripherals via the standard Inmos transputer links. A Motorola MC68701 8-bit microcomputer, serving as a programmable I/O controller, is incorporated into both interfaces. This solution lends a high degree of flexibility into the interface design, and can be used with any transputer board which has spare links available at edge connectors. Finally, two control applications are briefly described which utilize the interfaces.     

A Direct Electron Transfer‐Based Glucose/Oxygen Biofuel Cell Operating in Human Serum

We report on the fabrication and characterisation of the very first direct electron transfer‐based glucose/oxygen biofuel cell (BFC) operating in neutral glucose‐containing buffer and human serum. Corynascus thermophilus cellobiose dehydrogenase and Myrothecium verrucaria bilirubin oxidase were used as anodic and cathodic bioelements, respectively. The following characteristics of the mediator‐, separator‐ and membrane‐less, a priori, non‐toxic and simple miniature BFC, was obtained: an open‐circuit voltage of 0.62 and 0.58 V, a maximum power density of ca. 3 and 4 μW cm^–2 at 0.37 and 0.19 V of cell voltage, in phosphate buffer and human serum, respectively.