Lipidomic Analysis of Plasma from Healthy Men and Women Shows Phospholipid Class and Molecular Species Differences between Sexes

The phospholipid composition of lipoproteins is determined by the specificity of hepatic phospholipid biosynthesis. Plasma phospholipid 20:4n-6 and 22:6n-3 concentrations are higher in women than in men. We used this sex difference in a lipidomics analysis of the impact of endocrine factors on the phospholipid class and molecular species composition of fasting plasma from young men and women. Diester species predominated in all lipid classes measured. 20/54 Phosphatidylcholine (PtdCho) species were alkyl ester, 15/48 phosphatidylethanolamine (PtdEtn) species were alkyl ester, and 12/48 PtdEtn species were alkenyl ester. There were no significant differences between sexes in the proportions of alkyl PtdCho species. The proportion of alkyl ester PtdEtn species was greater in women than men, while the proportion of alkenyl ester PtdEtn species was greater in men than women. None of the phosphatidylinositol (PtdIns) or phosphatidylserine (PtdSer) molecular species contained ether-linked fatty acids. The proportion of PtdCho16:0_22:6, and the proportions of PtdEtn O-16:0_20:4 and PtdEtn O-18:2_20:4 were greater in women than men. There were no sex differences in PtdIns and PtdSer molecular species compositions. These findings show that plasma phospholipids can be modified by sex. Such differences in lipoprotein phospholipid composition could contribute to sexual dimorphism in patterns of health and disease.     

In situ measurements of human cough aerosol hygroscopicity

The airborne dynamics of respiratory droplets, and the transmission routes of pathogens embedded within them, are governed primarily by the diameter of the particles. These particles are composed of the fluid which lines the respiratory tract, and is primarily mucins and salts, which will interact with the atmosphere and evaporate to reach an equilibrium diameter. Measuring organic volume fraction (OVF) of cough aerosol has proved challenging due to large variability and low material volume produced after coughing. Here, the diametric hygroscopic growth factors (GF) of the cough aerosol produced by healthy participants were measured in situ using a rotating aerosol suspension chamber and a humidification tandem differential mobility analyser. Using hygroscopicity models, it was estimated that the average OVF in the evaporated cough aerosol was 0.88 ± 0.07 and the average GF at 90% relative humidity (RH) was 1.31 ± 0.03. To reach equilibrium in dry air the droplets will reduce in diameter by a factor of approximately 2.8 with an evaporation factor of 0.36 ± 0.05. Hysteresis was observed in cough aerosol at RH = ∼35% and RH = ∼65% for efflorescence and deliquescence, respectively, and may depend on the OVF. The same behaviour and GF were observed in nebulized bovine bronchoalveolar lavage fluid.     

Coronary bypass in vascular patients: a relatively high-risk procedure

A premise of cardiac risk stratification is that the added risk of coronary artery bypass grafting (CABG) is offset by the improved safety of subsequent vascular reconstruction (VR). We questioned if elective CABG is patients with severe peripheral vascular disease (PVD) is a relatively high-risk procedure. A cohort study of 680 elective CABG patients from January 1993 to December 1994 was performed using three mutually exclusive outcomes of complication-free survival, morbidity, and mortality. Patient characteristic, operative, and outcome data were prospectively collected. Retrospective review determined that 58 patients had either a standard indication for or a history of VR. Overall CABG mortality was 2.5%, with statistically similar but relatively higher rates for PVD as compared to non-PVD patients. In contrast, major morbidity occurred at rates 3.6-fold higher in PVD patients (39.7%) than in disease-free patients (16.7%) after adjustment for the effects of patient and operative variables (odds ratio [OR] 3.67, 95% confidence interval [CI] 1.93-6.99). CABG morbidity in the PVD patient was most likely in those patients with aortoiliac (OR 9.51, CI 3.20-28.27) and aortic aneurysmal (OR 5.24, CI 1.28-21.41) disease types. CABG in PVD patients is associated with significant major morbidity. Such morbidity may preclude or alter the timing of subsequent VR.     

Protein analysis of human von Ebner saliva and a method for its collection from the foliate papillae

The lingual serous glands of von Ebner are located close to the foliate and circumvallate papillae. Saliva secreted by these glands provides the immediate environment of the taste buds, and it has been hypothesized that it modulates taste perception. The purpose of this study was to develop a technique for collection of unstimulated and stimulated saliva from human von Ebner glands. Saliva was collected under resting conditions and after application of various gustatory stimuli (sweet, sour, salt, and bitter) by insertion of periostrips into the folds of the foliate papillae of healthy human volunteers. Stimulated saliva was also collected in glass microcapillaries or micropipettes. The flow-rates of unstimulated von Ebner saliva were 2.3 +/- 0.6 (S.E.) microL/min and 4.5 +/- 1.2 (S.E.) microL/min with 1% citric acid stimulation. The protein content was 2.5 +/- 0.5 (S.E.) mg/mL. The SDS gel electrophoretic profile of von Ebner saliva revealed two protein bands of Mr 18,000 that were identified on Western blots as von Ebner gland (VEG) proteins. Although lingual lipase activity was detected at very low levels by enzyme assay, this protein was not detected on Western blots. This collection technique should prove useful for analysis of specific functions associated with secretion from von Ebner glands.     

Revised Model of Strain in Ceria–Zirconia-Encapsulated Precious-Metal Particles

A previously proposed model of strain in ceria–zirconia-encapsulated precious-metal particles is revised to reflect several new observations: encapsulation of unstrained Pt particles, quantitative relation between partial reduction and the change in ceria–zirconia cell parameters, temperature/time dependence of strain relaxation/imposition in encapsulated Pd and Rh particles, and strained PdO. According to the revised model, the main cause of strain is partial oxidation of the precious metal (rather than the change in oxygen content of ceria–zirconia, as originally suggested).     

The microstructure of Cu films deposited by the self-ion assisted technique

The microstructures of Cu films deposited by the self-ion assisted, partially ionized beam (PIB) deposition technique under two different accelerating potentials, 0 KeV and 6 KeV, are compared. The 6 KeV film shows a bimodal (111) fiber and (100) fiber texture with an abundance of twin boundaries and a relatively large average grain size with a typical lognormal distribution. The 0 KeV film consists of small, mostly (111) oriented grains with islands of abnormally large (100) grains. The controlling factors for the abnormal growth of the (100) grains are discussed in relation to the observed microstructures, showing that all factors necessary for abnormal (100) growth are present in the films.     

Equal-channel angular extrusion of beryllium

The equal-channel angular extrusion (ECAE) technique has been applied to a powder metallurgy (P/M) source Be alloy. Extrusions have been successfully completed on Ni-canned billets of Be at approximately 425°C. No cracking was observed in the billets, and significant grain refinement was achieved. In this article, microstructural features and dislocation structures are discussed for a singlepass extrusion, including evidence of <c> and <c+a> dislocations. Significant crystallographic texture developed during ECAE, which is discussed in terms of this unique deformation processing technique and the underlying physical processes which sustain the deformation. S.R. AGNEW, formerly with the Oak Ridge National Laboratory, Oak Ridge, TN 37831-6115 This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

Contamination of facial memory through exposure to misleading composite pictures.

In Exp I, 46 male and 51 female undergraduates witnessed a filmed incident and later described the target. Results show that Ss who observed a composite containing misleading information (either incorrect hair or an added moustache) were significantly more likely to misreport hairstyle and the presence of a moustache than those who did not. In Exp II, 210 17–65 yr old Ss observed a filmed incident and were tested for their recall and recognition of the target either immediately or after delays of 2 or 7 days. Significant bias, consistent with the content of the misleading composite, was present for both cued recall and choice of mug shot in a photo spread. The effect did not increase over delay but was greater when the composite was seen just prior to recall than immediately after the incident. Implications concerning interference with the memory of the witness who produced the composite and for other witnesses exposed to the misleading composite are discussed. (33 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Simultaneous sulfide and acetate oxidation under denitrifying conditions using an inverse fluidized bed reactor

BACKGROUND: Simultaneous removal of sulfur, nitrogen and carbon compounds from wastewaters is a commercially important biological process. The objective was to evaluate the influence of the CH₃COO^?/NO₃^? molar ratio on the sulfide oxidation process using an inverse fluidized bed reactor (IFBR). RESULTS: Three molar ratios of CH₃COO^?/NO₃^? (0.85, 0.72 and 0.62) with a constant S^2?/NO₃^? molar ratio of 0.13 were evaluated. At a CH₃COO^?/NO₃^? molar ratio of 0.85, the nitrate, acetate and sulfide removal efficiencies were approximately 100%. The N₂ yield (g N₂ g^?1 NO₃^?‐N consumed) was 0.81. Acetate was mineralized, resulting in a yield of 0.65 g inorganic‐C g^?1 CH₃COO^?‐C consumed. Sulfide was partially oxidized to S⁰, and 71% of the S^2? consumed was recovered as elemental sulfur by a settler installed in the IFBR. At a CH₃COO^?/NO₃^? molar ratio of 0.72, the efficiencies of nitrate, acetate and sulfide consumption were of 100%, with N₂ and inorganic‐C yields of 0.84 and 0.69, respectively. The sulfide was recovered as sulfate instead of S⁰, with a yield of 0.92 g SO₄^2?‐S g^?1 S^2? consumed. CONCLUSIONS: The CH₃COO^?/NO₃^? molar ratio was shown to be an important parameter that can be used to control the fate of sulfide oxidation to either S⁰ or sulfate. In this study, the potential of denitrification for the simultaneous removal of organic matter, sulfide and nitrate from wastewaters was demonstrated, obtaining CO₂, S⁰ and N₂ as the major end products. Copyright © 2008 Society of Chemical Industry