Superswelling Microneedle Arrays for Dermal Interstitial Fluid (Prote)Omics

The noninvasive sampling of dermal interstitial fluid (ISF) for the monitoring of clinical biomarkers is a greatly appealing area of research. The identification of molecular biomarkers in biological fluids has been accelerated with -omics analyses but remains limited in ISF because of its time-consuming and complex extraction process. Here, the generation of microneedle (MN) patches made of superabsorbent acrylate-based hydrogels for the rapid sampling of dermal ISF is described to explore its proteome. In depth, iterative optimization allows the identification of novel acrylate-based compositions with the required chemical, mechanical, and biocompatibility properties allowing proteomic analysis of the extracted ISF for the first time after sampling with swelling MNs. The generated MN arrays show no cytotoxic effect, successfully cross the stratum corneum, and can collect up to 6 µL of dermal ISF in 10 min in vivo. Proteomics lead to the detection of 176 clinically relevant biomarkers in the collected samples validating the use of ISF as a relevant bodily fluid for disease monitoring and diagnostic. Importantly, it is discovered that extraction fingerprint is strongly dependent on the MNs chemistry, and thus specific biomarkers could be selectively extracted by tuning the composition of the patch, making the system versatile and specific.     

p53 gene therapy in vivo of herpatocellular and liver metastatic colorectal cancer

Tumor suppressor genes such as p53 contribute to the oncogenic process via loss-of-function mechanisms such as genetic mutation or complex formation with other cellular or viral proteins. p53 is mutated in approximately 50% of human tumors and has an important role in the genesis or progression of both colorectal and hepatocellular cancers. Colorectal cancer is leading cause of cancer mortality in the United States, whereas hepatocellular cancer is the leading worldwide cause of cancer death; the liver is a primary site of morbidity in both diseases. Because systemic tumor suppressor gene therapy is currently not feasible, we have chosen to develop a regional form of such therapy directed at primary or metastatic liver neoplasms. Gene replacement therapy with p53 is a promising new strategy to treat advanced human cancers.     

PROBLEM-SOLVING SUPPORT FOR TQM A Hypertext Approach

New IS technology is contributing to continuous quality improvement throughout the organization. Hypertext and hypermedia offer new ways for decision makers to gain easy and relevant access to information. By combining hypertext with total quality tools, decision makers are able to explore the richness of data bases in more creative and useful ways. This article describes how you can develop a hypertext system that can help employees improve their job performance through better problem solving.     

Methodological issues in outcome studies of school-based interventions for the prevention of adolescent depression.

Several methodological and ethical issues are addressed in the context of 3 related school-based studies of the primary and targeted prevention of depressive symptoms and disorder in high school adolescents. These issues include obtaining S consent and the protection of confidentiality, minimizing attrition over long-term follow-up periods, the "unit of assignment" issue common to most school-based research, and ensuring therapist fidelity to the intervention protocol. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Water-Quality Monitoring in Anguilla

Anguilla is a UK overseas (non-independent) territory in the Caribbean. It is a small middle-income island with a population of 13 000, and recent statistics indicate that it is more dependent on tourism than any other country or territory in the world. Rapid population growth and development have placed more emphasis on the need for human health and environmental protection. For the first time, a systematic water-quality monitoring programme has been developed, based on the realities of the local situation, e.g. low resource base, limited capabilities, dependence on household rainwater catchment, storage cisterns, and a poor water-supply network. Development of the programme incorporated the key themes of pragmatic, realistic, incremental, responsive, and consultative approaches.     

Analysis of a stiffener intersection eccentricity in a steel containment

Containment structures have several regions in which the continuity of the cylindrical pressure boundary is interrupted, e.g., shell penetrations, discontinuous stiffeners, and changes in the shell thickness. Significant strain concentrations can occur in these areas of discontinuity. The Sandia National Laboratories 1:8-scale steel containment equipment hatch was analyzed as an example of an eccentricity at a stiffener intersection.A portion of the as-built 1:8-scale model was modeled with the ANSYS general purpose finite element program using triangular, thin shell finite elements. The overall size of the model was determined from Saint-Venant type considerations of the stress field around the hatch. Shell elements were used to model the ring and formed stiffeners. Geometric and material nonlinear behavior were included. The model was loaded using discrete load steps up to a pressure of 165 psig. At this pressure, the maximum strain was 19.7 percent in the formed stiffener near its intersection with the ring stiffener. The finite element solution demonstrated the very localized nature of the strain field near the ring/formed stiffener intersection.In an attempt to reduce analysis costs, a small portion of the 1:8-scale model immediately surrounding the ring/formed stiffener intersection was selected for further analysis. Two smaller models, a ring/formed stiffener intersection and a ring/circular stiffener intersection, were studied. The models were significantly smaller than the regions used previously. A comparison of the two intersection models showed that the circular stiffener is a more efficient configuration.     

Medical savings accounts: opportunities for cost savings?

Interest in medical savings accounts (MSAs) as a potential tool to reduce healthcare costs has been widespread. A small number of countries have either implemented or run pilot programs of MSAs, and vigorous policy debates have taken place in several other countries about the potential merits of introducing MSAs as a method of paying for health care. In this paper we develop a model to assess the cost saving potential of MSAs in a publicly funded healthcare system. We assume that the public healthcare payer may choose between reimbursing healthcare expenditures through an MSA or through a form of third‐party payer insurance. We use the model to identify the conditions under which MSAs may reduce costs. We illustrate using data on healthcare expenditures from Canada.     

Structural characterisation of apatite coatings

The current, most frequently employed, commercial route to produce hydroxyapatite prosthetic coatings is plasma spraying. However, this has several important limitations especially for textured surfaces. Low temperature methods of coating fabrication such as cathodic electrodeposition are attractive alternatives. However, quantitative characterisation of the phase composition of thin electrodeposited coatings can be problematic. An X-ray diffraction method, which provides quantitative compositional information without reference to external or internal standards, is introduced and validated. The method can also be applied when Bragg peaks from the supporting substrate are apparent within the data and preferred orientation can be tolerated. This method has been used to examine in detail the microstructure of electrodeposited coatings which are compared directly with those formed by a commercial plasma spraying process.We show that, unlike the plasma sprayed coatings, the electrodeposited material consists of a single crystalline phase (hydroxyapatite) and a significantly reduced amorphous phase. The electrodeposited coatings also possess significantly more microstrain and a smaller crystallite size than the corresponding plasma sprayed material.     

Nanostructured polymer blends: Synthesis and structure

Nanostructured polymer blends prepared via anionic ring opening polymerizations of cyclic monomers in the presence of a pre-made polymer melt exhibit a number of special properties over traditional polymer blends and homopolymers. Here, we report on a simple and versatile method of in situ polymerization of macrocyclic carbonates in the presence of a maleic anhydride polypropylene (mPP) matrix and a surface-active compatibilizer (i.e. PC grafted onto a mPP backbone generated in situ) to yield a micro- and nanostructured polymer blends consisting of a polycarbonate (PC) minor phase, and a polypropylene (PP) major phase. By varying the processing conditions and concentration of the macrocyclic carbonate it was possible to reduce the size of the PC dispersions to an average minor diameter of 150 nm. NMR and TEM characterizations indicate that the PC dispersions do not influence crystal content in the PP phase. Overall, the results point to a simple strategy and versatile route to new polymeric materials with enhanced benefits.