Potential influence of microorganisms on the corrosion of carbon steel in the French high- and intermediate-level long-lived radioactive waste disposal context

In the context of the high-level radioactive waste disposal CIGEO, the corrosion rate due to microbially influenced corrosion (MIC) has to be evaluated. In France, it is envisaged to dispose of high- and intermediate-level long-lived radioactive waste at a depth of 500 m in a deep geological disposal, drilled in the Callovo-Oxfordian claystone (Cox) formation. To do so, a carbon steel casing will be inserted inside disposal cells, which are horizontal tunnels drilled in the Cox. A specific cement grout will be injected between the carbon steel casing and the claystone. A study was conducted to evaluate the possibility of MIC on carbon steel in the foreseeable high radioactive waste disposal. The corrosiveness of various environments was investigated at 50°C and 80°C with or without microorganisms enriched from samples of Andra's underground research laboratory. The monitoring of corrosion during the experiments was ensured using gravimetric method and real-time corrosion monitoring using sensors based on the measurements of the electrical resistance. The corrosion data were completed with microbiological analyses including cultural and molecular characterizations.     

The polymerisation of 2-furyl vinyl ketone

Summary 2-Furyl vinyl ketone was polymerised using anionic, cationic and free-radical initiators. Yields and molecular weights varied with the type of activation. Whereas radical polymerisation gave a product possessing a regular vinylic structure, other kinds of units were detected in the polymers prepared with anionic and cationic catalysts.     

The use of direct tension tests for the assessment of low temperature properties of bituminous binders

In France, tensile tests on bituminous binders are usually performed on vertical electromechanical loading frames, the test samples being placed in an insulated temperature control chamber and the deformations determined from the displacement of the cross-head. The paper presents the results of an inter-laboratory study of which the objective was to evaluate the suitability of this kind of equipment for the performance of direct tension tests at low temperatures. Most of the test parameters, used for this study complied with the procedure proposed by SHRP as from 1995 (AASHTO TP3). The various operating factors, and more particularly those affecting the determination of true sample elongation (mechanical plays, deformation of the gripping systems, ....), are discussed and a number of correcting procedures are proposed. Nevertheless, the results remained scattered. Considering the “flat” evolution of strain at failure with temperature in the domain of brittle behaviour, this makes it rather difficult to accurately define the temperature for failure at 1% elongation (T_ε=1%). This is also the case when this temperature is located in the zone of transition between brittle and ductile behaviour. The authors suggest that, together with the corresponding tensile strain, this “transition temperature” could be used as an alternative criterion which has the advantage of being linked to a physical behaviour of the material.     

Evolutionary Generalized Radial Basis Function neural networks for improving prediction accuracy in gene classification using feature selection

Radial Basis Function Neural Networks (RBFNNs) have been successfully employed in several function approximation and pattern recognition problems. The use of different RBFs in RBFNN has been reported in the literature and here the study centres on the use of the Generalized Radial Basis Function Neural Networks (GRBFNNs). An interesting property of the GRBF is that it can continuously and smoothly reproduce different RBFs by changing a real parameter τ. In addition, the mixed use of different RBF shapes in only one RBFNN is allowed. Generalized Radial Basis Function (GRBF) is based on Generalized Gaussian Distribution (GGD), which adds a shape parameter, τ, to standard Gaussian Distribution. Moreover, this paper describes a hybrid approach, Hybrid Algorithm (HA), which combines evolutionary and gradient-based learning methods to estimate the architecture, weights and node topology of GRBFNN classifiers. The feasibility and benefits of the approach are demonstrated by means of six gene microarray classification problems taken from bioinformatic and biomedical domains. Three filters were applied: Fast Correlation-Based Filter (FCBF), Best Incremental Ranked Subset (BIRS), and Best Agglomerative Ranked Subset (BARS); this was done in order to identify salient expression genes from among the thousands of genes in microarray data that can directly contribute to determining the class membership of each pattern. After different gene subsets were obtained, the proposed methodology was performed using the selected gene subsets as new input variables. The results confirm that the GRBFNN classifier leads to a promising improvement in accuracy.     

Secondary Metabolic Profile as a Tool for Distinction and Characterization of Cultivars of Black Pepper (Piper nigrum L.) Cultivated in Pará State,Brazil

This study evaluated the chemical compositions of the leaves and fruits of eight black pepper cultivars cultivated in Pará State (Amazon, Brazil). Hydrodistillation and gas chromatography–mass spectrometry were employed to extract and analyze the volatile compounds, respectively. Sesquiterpene hydrocarbons were predominant (58.5–90.9%) in the cultivars “Cingapura”, “Equador”, “Guajarina”, “Iaçará”, and “Kottanadan”, and “Bragantina”, “Clonada”, and “Uthirankota” displayed oxygenated sesquiterpenoids (50.6–75.0%). The multivariate statistical analysis applied using volatile composition grouped the samples into four groups: γ-Elemene, curzerene, and δ-elemene (“Equador”/“Guajarina”, I); δ-elemene (“Iaçará”/“Kottanadan”/“Cingapura”, II); elemol (“Clonada”/“Uthirankota”, III) and α-muurolol, bicyclogermacrene, and cubebol (“Bragantina”, IV). The major compounds in all fruit samples were monoterpene hydrocarbons such as α-pinene, β-pinene, and limonene. Among the cultivar leaves, phenolics content (44.75–140.53 mg GAE·g⁻¹ FW), the enzymatic activity of phenylalanine-ammonia lyase (20.19–57.22 µU·mL⁻¹), and carotenoids (0.21–2.31 µg·mL⁻¹) displayed significant variations. Due to black pepper’s susceptibility to Fusarium infection, a molecular docking analysis was carried out on Fusarium protein targets using each cultivar’s volatile components. F. oxysporum endoglucanase was identified as the preferential protein target of the compounds. These results can be used to identify chemical markers related to the susceptibility degree of black pepper cultivars to plant diseases prevalent in Pará State.     

Superabsorbent hydrogel based on modified polysaccharide for removal of Pb2+ and Cu2+ from water with excellent performance

This contribution describes the absorption percentage of Pb²⁺ and Cu²⁺ from water by a superabsorbent hydrogel matrix (SH) made from an anionic polysaccharide copolymerized with acrylic acid (AAc) and acrylamide (AAm). Metal‐absorption tests, upon sequential pH variation, indicated that the SH has pH‐sensitivity for the absorption of both metals from solution, attributed to the functional ionic groups (? COOH) present in the AAc and arabic gum (AG) segments. At the pH 5.0, the SH exhibited good absorption capacity: 73.10% for Pb²⁺, 81.99% for Cu²⁺ in water and 63.64% for Pb²⁺, and 76.67% for Cu²⁺ in saline water with 0.1 mol kg^?1 ionic strength. A replicated 2² full factorial design with a central point was built to evaluate the maximum absorption capacity of the metals into the SH. It was found that both the interaction and main effects of the pH and the initial concentration of metal solution on absorption percentage of the metals were statistically significant. Surface response plots indicated that the absorption capacity of both metals into the SH may be appreciably improved by using the solutions with lower initial concentration of metal and with higher pH values. Metal‐absorption results demonstrated that the SH is a convenient material for absorption of Pb²⁺ and Cu²⁺ from pure aqueous and saline aqueous environments. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Dielectric behavior of PVDF/POMA blends that have a low doped POMA content

The real (ε′) and imaginary (ε″) components of the complex permittivity of blends of PVDF [poly(vinylidene fluoride)] with POMA [poly(o‐methoxyaniline)] doped with toluenosulfonic acid (TSA) containing 1, 2.5, and 5 wt % POMA–TSA were determined in the frequency interval between 10² and 3 × 10⁶ Hz and in the temperature range from ?120 up to 120°C. It was observed that the values of ε′ and ε″ had a greater increase with the POMA–TSA content and with a temperature in the region of frequencies below 10 kHz. This effect decreased with frequency and it was attributed to interfacial polarization. This polarization was caused by the blend heterogeneity, formed by conductive POMA–TSA agglomerates dispersed in an insulating matrix of PVDF. The equation of Maxwell–Garnett, modified by Cohen, was used to evaluate the permittivity and conductivity behavior of POMA–TSA in the blends. A strong decrease was observed in POMA–TSA conductivity in the blend, which was bigger the lower the POMA–TSA content in the blend. This decrease could have been caused either by the POMA dedoping during the blend preparation process or by its dispersion into the insulating matrix. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 752–758, 2003     

Rheological,thermal, and morphological properties of blends based on poly(propylene), ethylene propylene rubber,and ethylene-1-octene copolymer that could result from end of life vehicles: Effect of maleic anhydride grafted poly(propylene)

The objective of this work is to study the properties of blends that could result from the recycling of end-of-life vehicles (ELV). While ethylene propylene rubber (EPR) and ethylene propylene diene monomer (EPDM) have been used extensively as elastomeric additives in poly(propylene) (PP), they can be substituted by ethylene-1-octene copolymer (EOC). As a consequence, the matter resulting from the sorting of ELV might be more complex and made of PP, EPR, and EOC. The effect of incorporating EOC [that is a polyethylene elastomer (PEE)] and maleic anhydride grafted polypropylene (PP-g-MAH) on the rheological, thermal, and morphological properties of PP/EPR blends has been investigated. Blends of various compositions (with and without compatibilizer) were prepared using a corotating twin-screw extruder. The results were compared to the ones presented by a commercial (PP/EPR) blend. The EPR phase is dispersed in the form of spherical particles in (PP/EPR). The EOC phase is dispersed in the form of aggregated particles. Dynamic viscoelastic and differential scanning calorimetry properties of (PP/EPR)/EOC blends shows the incompatibility of the components even in presence of PP-g-MAH copolymer. POLYM. ENG. SCI., 47:1009–1015, 2007. © 2007 Society of Plastics Engineers