A simple and cost-effective method for fabrication of integrated electronic-microfluidic devices using a laser-patterned PDMS layer

We report a simple and cost-effective method for fabricating integrated electronic-microfluidic devices with multilayer configurations. A CO₂ laser plotter was employed to directly write patterns on a transferred polydimethylsiloxane (PDMS) layer, which served as both a bonding and a working layer. The integration of electronics in microfluidic devices was achieved by an alignment bonding of top and bottom electrode-patterned substrates fabricated with conventional lithography, sputtering and lift-off techniques. Processes of the developed fabrication method were illustrated. Major issues associated with this method as PDMS surface treatment and characterization, thickness-control of the transferred PDMS layer, and laser parameters optimization were discussed, along with the examination and testing of bonding with two representative materials (glass and silicon). The capability of this method was further demonstrated by fabricating a microfluidic chip with sputter-coated electrodes on the top and bottom substrates. The device functioning as a microparticle focusing and trapping chip was experimentally verified. It is confirmed that the proposed method has many advantages, including simple and fast fabrication process, low cost, easy integration of electronics, strong bonding strength, chemical and biological compatibility, etc.     

Unveiling the presence of mixed oxidation states of Europium in Li7+δEuxLa3−δZr2−δO12−δ garnet and its impact on the Li-ion conductivity

Recently, lanthanides have been employed by researchers to examine their impact on the structure and properties of Li₇La₃Zr₂O₁₂ (LLZO) garnets. In this regard, we developed Europium oxide (Eu₂O₃) doped LLZO (Li_7+δEu_xLa_3−δZr_2−δO_12−δ) solid electrolyte which demonstrates a cubic phase with the symmetry of Iad (No.230) at room temperature. In this investigation, different concentrations of Eu ranging from 0.1 to 0.6 atoms per formula unit (pfu) were doped into Li₇La₃Zr₂O₁₂ to evaluate the impact of Eu on the stability of the cubic phase and thereby the ionic conductivity. The results unveiled that upon doping Eu³⁺ ions, the Eu²⁺ state is also formed and is then self-doped into the structure in which Rietveld refinement coupled with XPS, EPR, and solid-state NMR suggests that Eu³⁺ ions most probably partially occupy Zr⁴⁺ (16a) site, the Eu²⁺ ions occupy La³⁺ (24d) site, and the Li⁺ ions occupy two different sites (24d and 96h). It was further found that such a site preference induces distortion at LaO₈ polyhedrons opening up the neck for Li-ions diffusion, thereby enhancing the ionic conductivity. Moreover, it was revealed that Li-ions probably hop from 96h to 24d and then to 96h site to generate the Li-ion movement. Overall, by introducing Eu ions into the LLZO structure, an enhanced bulk ionic conductivity of 0.30 × 10⁻³ S/cm at 298 K with a minimum electronic conductivity of 2.547 × 10⁻⁹ S/cm at 298 K was achieved.     

Improved concentration and separation of particles in a 3D dielectrophoretic chip integrating focusing, aligning and trapping

This article presents a dielectrophoresis (DEP)-based microfluidic device with the three-dimensional (3D) microelectrode configuration for concentrating and separating particles in a continuous throughflow. The 3D electrode structure, where microelectrode array are patterned on both the top and bottom surfaces of the microchannel, is composed of three units: focusing, aligning and trapping. As particles flowing through the microfluidic channel, they are firstly focused and aligned by the funnel-shaped and parallel electrode array, respectively, before being captured at the trapping unit due to negative DEP force. For a mixture of two particle populations of different sizes or dielectric properties, with a careful selection of suspending medium and applied field, the population exhibits stronger negative DEP manipulated by the microelectrode array and, therefore, separated from the other population which is easily carried away toward the outlet due to hydrodynamic force. The functionality of the proposed microdevice was verified by concentrating different-sized polystyrene (PS) microparticles and yeast cells dynamically flowing in the microchannel. Moreover, separation based on size and dielectric properties was achieved by sorting PS microparticles, and isolating 5 μm PS particles from yeast cells, respectively. The performance of the proposed micro-concentrator and separator was also studied, including the threshold voltage at which particles begin to be trapped, variation of cell-trapping efficiency with respect to the applied voltage and flow rate, and the efficiency of separation experiments. The proposed microdevice has various advantages, including multi-functionality, improved manipulation efficiency and throughput, easy fabrication and operation, etc., which shows a great potential for biological, chemical and medical applications.     

Fabrication process of open surfaces by robotic fibre placement

Composite materials are being used extensively in many industrial sectors. They offer excellent material properties compared to other structural materials available. However, the traditional fabrication process using manual hand lay-up is time consuming and labour intensive. Therefore, robotic fibre placement has been introduced to overcome these drawbacks. This approach may greatly reduce cycle time and manufacturing costs. This paper describes the overall strategy for the establishment of a flexible robotic fibre placement technique. The fabrication process planning of this new technique is presented. Three different types of fibre placement for open surfaces are discussed. These include simulation-based fibre path generation, fibre steering, and sensory-based contour following methodologies. The system architecture for the process control is also presented.     

The influence of nitrogen doping on reduced graphene oxide as highly cyclable Li-ion battery anode with enhanced performance

A straightforward, one-step route has been established to fabricate reduced- (rGO) and nitrogen-doped reduced graphene oxide (NrGO) with remarkable lithium-ion storage properties. The graphene oxide (GO) was synthesized as starting material by improved Hummers’ method. Thereafter, thermally annealing GO with NH₃ at elevated temperature to synthesize NrGO was yielded a more open structure with nitrogen sites suitable for enhanced Li intercalation. NrGO exhibited a reversible capacity of 240 mAhg^?1 at 10 Ag^-1 after 500 cycles with 90% capacity retention, which is the best result achieved among graphene oxide-based anodes at this current density. In contrast to rGO, NrGO cells exhibited a gradually increasing capacity profile, reaching up to 114% of the initial capacity at 0.1, 2, and 10 Ag^-1 current densities. Results showed that high occupancy of pyridinic N within NrGO enhanced battery performance and cell kinetics upon cycling which offers long-time operability at high current density.     

Simultaneous recurrent neural network trained with non-recurrent backpropagation algorithm for static optimisation

This paper explores feasibility of employing the non-recurrent backpropagation training algorithm for a recurrent neural network, Simultaneous Recurrent Neural network, for static optimisation. A simplifying observation that maps the recurrent network dynamics, which is configured to operate in relaxation mode as a static optimizer, to feedforward network dynamics is leveraged to facilitate application of a non-recurrent training algorithm such as the standard backpropagation and its variants. A simulation study that aims to assess feasibility, optimizing potential, and computational efficiency of training the Simultaneous Recurrent Neural network with non-recurrent backpropagation is conducted. A comparative computational complexity analysis between the Simultaneous Recurrent Neural network trained with non-recurrent backpropagation algorithm and the same network trained with the recurrent backpropagation algorithm is performed. Simulation results demonstrate that it is feasible to apply the non-recurrent backpropagation to train the Simultaneous Recurrent Neural network. The optimality and computational complexity analysis fails to demonstrate any advantage on behalf of the non-recurrent backpropagation versus the recurrent backpropagation for the optimisation problem considered. However, considerable future potential that is yet to be explored exists given that computationally efficient versions of the backpropagation training algorithm, namely quasi-Newton and conjugate gradient descent among others, are also applicable for the neural network proposed for static optimisation in this paper.     

Soft Mechanical Sensors Through Reverse Actuation in Polypyrrole

The phenomenon of voltage generated from a soft sensor using polypyrrole in response to mechanical deformation is described and investigated. The sensor consists of two polypyrrole layers in contact with an electrolyte and operates in bending mode in air. The magnitude and sign of the induced voltage was found to depend on the type of dopant counter‐ions and the nature of the surrounding electrolyte. The mechanical sensor response is shown to be a “reverse actuation”, generating millivolt signals for millimeter sized deflections or ～ 1000 C m^–3 charge for 1 % strain in the polypyrrole layer. A model based on ‘Deformation Induced Ion Flux' has been proposed whereby the strain induced volume change in the polymer produces a shift in the Donnan equilibrium between mobile dopant ions inside the polymer and in the external electrolyte. A simple thermodynamic model provides reasonable estimates of the size of the voltage and charge produced.     

A highly selective and sensitive benzothiazole‐based ‘turn‐on’ fluorescent sensor for Hg2+ ion

A simple benzothiazole‐based fluorescent probe (TDA) for the determination of Hg²⁺ ion in aqueous solutions was synthesised in one step and characterised by ¹H NMR, ¹³C NMR, APT, COSY, FTIR, and elemental analysis. TDA shows a significant fluorescence change upon the interaction of Hg²⁺ ion in DMF–water (v/v = 1/1), while only minor changes in fluorescence intensity are observed with 18 other metal ions. Fluorescence enhancement by a factor of 15 is achieved upon selective interaction with Hg²⁺ ion. The Hg²⁺ ion detection process is found to be pH dependent; therefore, TDA could be feasible within a pH range of 4.0–7.0.     

An algorithm to find the number of parallel stations for optimal cell scheduling

This paper focuses on cell scheduling problem in AVON Lomalinda Inc., a jewelry manufacturing company. However, the proposed algorithm can be used in other industries with similar operating conditions as well. The most important feature of the problem under study is that there are more operators allocated to the cells than the number of operations thus making it inevitable to have parallel stations. An optimizing algorithm to find the number of parallel stations with preassigned operations is suggested and later used to find the best common cell size for the entire plant.     

Comparison of effects induced by toxic applications of kainate and glutamate by glucose deprivation on area CA1 of rat hippocampal slices

This study focuses on the fortuitous discovery of an atypical atherosclerotic lesion in four of 49 male adult cynomolgus monkeys (macacus fascicularis) which were maintained for a long time at a high level of hypercholesterolemia, and in seven of 19 female cynomolgus monkeys examined from the second to the 24th week of hypercholesterolemic diet: this lesion was in formation or already mature during this period of diet. This atypical lesion was formed by a collagen and elastic network surrounding synthetic smooth muscle cells without fibrofatty or fibrous plaques. Lipids were occasionally seen in the inner intima. The lesion appeared early (from the third week of diet). Once established, its morphology did not change. It became more extensive, but was not complicated by lipid overload in spite of prolonged, permanent hypercholesterolemia. This response to hypercholesterolemia is interesting because the activity of the smooth muscle cells differs from that observed in the classic lesion: they intervene earlier, their replication is very marked and rapid, their elastin secretion is greater and remains constant over time, and their phagocytic properties are reduced. This experimental study examines the installation and the maintenance of this lesion and raises the problem of its origin.