微波-表面活性剂协同提取万寿菊叶黄素工艺研究

以提高万寿菊叶黄素的提取率为目的,采用单因数实验结合正交实验的方法.研究了微波-表面活性剂协同提取万寿菊花中叶黄素的丁艺.结果表明:万寿菊叶黄素的微波-表面活性剂协同提取最优工艺为:以乙酸乙酯为提取剂,表面活性剂Tween-20为最佳助萃取剂(质量分数为0.03%),提取固液比1∶60(g/mL),微波功率400 W,微波提取温度为60℃,提取时间2 min.在此工艺下,万寿菊叶黄素的提取量为3.209 mg/g.     

关于普通高校课堂教学规律的探讨

课堂教学是教学的基本形式,课堂教学规律就是人的认知规律。只有按照这一认知规律去组织教学,并努力提高课堂教学实效,才能真正完成教学任务,达到培养人才的目的。本文论述了普通高校课堂教学的一般规律。     

沼气脱硫技术研究

本文综述了近年研究人员在开发沼气脱硫工艺方面所做的工作,包括现代与传统的脱硫技术工艺.探讨了物理、化学和生物脱硫技术对沼气脱硫工艺的影响因素.     

高酸Purex流程镎走向控制及其回收纯化工艺研究

文章介绍用逆流萃取串级实验方法研究高酸Purex萃取流程lA萃取器镎走向控制(与铀、钚共萃取)及自lAP中定量反萃镎、分离铀、钚工艺条件的实验结果。     

锰锌铁氧体纳米粉体的液相制备及磁性能

以δ-FeOOH为前驱体,用氨水调节溶液的pH值,分别采用(1)90℃水浴加热动态转化、(2)沸腾回流动态转化,(3)90℃静态转化及(4)200℃水热法四种方法合成了锰锌铁氧体纳米粉体.采用X射线衍射仪(XRD),透射电子显微镜(TEM)、振动样品磁强计(VSM)和X射线荧光光谱仪(XRF)等方法对粉体进行了表征,对四种液相法制备的锰锌铁氧体纳米粉体的结构和性能等进行了对比和分析.结果表明,四种方法中沸腾回流相转化法得到的产物具有磁性能较好、形状较规则、粒径可控等优点.     

Preparation and properties of nanosize MnZn ferrite from δ-FeOOH

Ferrous ion was transformed into feroxyhyte (δ-FeOOH) by oxidation. Then, manganese sulfate and zinc sulfate in some ratio were added to the feroxyhyte solution. The co-precipitation was boiling reflux conditions sometime under constant stirring. The nanosize MnZn ferrite powder was formed. The mechanism of preparation of the nanosize MnZn ferrite was discussed, and the formation of feroxyhyte which was playing a key role during the process was mentioned. The properties of powder was tested by means of X-ray diffraction, transmission electron microscopy and vibrating sample magnetometer. The results show that the samples of spherical particles about 20 nm, which have characteristics of ferrimagnetism, has larger saturation magnetization, but the remanent magnetization and coercivity are comparatively smaller. The spinel MnZn ferrite nanosize powder was successfully prepared from δ-FeOOH at low temperature, with low-carbon steel and peroxide as main material.     

2,6-萘二甲酸二甲酯与一些二甲基萘所形成的激基复合物

2,6-萘二甲酸二甲酯与一些二甲基萘可以形成激基复合物。本文通过稳态和动态荧光光谱研究了这类激基复合物的形成与分子结构的关系。结果表明,尽管这些二甲基萘的电离能基本相同,但因取代基位置不同使分子中电荷分布不同,从而影响了激基复合物的形成能力。     

Electroless nickel plating on the surface of carbon fibers

The electroless nickel plating on the surface of carbon fibers was prepared by pretreating the carbon fibers in order to increase their conductivity,and consequently enhance the EMI shielding effectiveness of the composites.The relationship between the performance of depositing coat and pH value,temperature,reaction time and the way of agitation was studied.Results show that the depositing quality is stable under pH between 4.5 and 5.0,temperature between 75 ℃ and 85 ℃,reaction time for 10 min and air agitation.The uniform and compact nickel layer deposited on carbon fibers was proved by XRD and SEM,and the electrical resistivity of carbon fibers with nickel coating was tested.Results indicate that the electrical resistivity of carbon fibers with electroless nickel plating is decreased by an order of magnitude compared with that of carbon fibers.It means that nickel coating can greatly improve the electromagnetic interference shielding properties of carbon fibers.