Cast titanium as implant material

The tissue response in rats to implants made of machined and cast titanium was evaluated after 1 and 12 weeks. The implants consisted of a circular plate portion, located in the abdominal wall, and a cylindrical rod portion protruding into the peritoneal cavity. The chemical and topographical surface properties of the two types of implants differed considerably. The implants with surrounding tissue were processed en bloc for light and electron microscopy. The bulk metal was removed by an electrochemical procedure which permitted the sectioning and evaluation of the intact implant-tissue interface. The general distribution of macrophages and fibroblasts was the same around the plate portion of both types of implants. Macrophages constituted the predominating cell type with the highest concentration in the innermost cell zone closest to the implant. The number of macrophages per section area was significantly higher around machined implants. Multinuclear giant cells, always located at the implant surface, were more frequent around cast implants. The majority of the intraperitoneal rod portions were partially (1 week) or completely (12 weeks) covered by tissue; partial or complete overgrowth of tissue was rare for machined rod portions. Imaging electron energy loss spectroscopy demonstrated the presence of titanium in macrophages in the peripheral part of the tissue capsule around cast, but not machined implants. We conclude that the tissue responses to the two types of titanium implants differed considerably in the two biological environments (soft tissue in abdominal wall; peritoneal cavity) examined and that the response in one environment does not predict the response in the other. We also believe that improvements have to be made in the casting procedure in order to reduce surface roughness and contamination before cast implants can be used in clinical applications.     

Seismic safety of lifelines—an optimum design method

Lifeline systems are vulnerable to two types of hazards arising from potential earthquake sources. These are the hazard of a fault-rupture strike on elements of a lifeline system and the hazard of overstress induced in different elements of the system because of the ground vibration. An optimum design method is presented in this paper for the design of a lifeline system for a maximum accepted probability of failure because of any of the two modes of failure. The method may be used to determine an optimum path between a number of fixed points which represent supply or demand stations in the system.     

Anthocyanins characterization of 15 Iranian pomegranate (Punica granatum L.) varieties and their variation after cold storage and pasteurization

Anthocyanins (ACs) are phenolic compounds that are distributed widely in fruits and vegetables. Apart from imparting color to plants, ACs also have an array of health-promoting benefits. In this research, the amounts of major ACs of 15 pomegranate (Punica granatum L.) varieties obtained from Yazd province were determined. The major ACs detected in the studied varieties were as follows: delphinidin 3-glucoside (2.19–16.29 mg/L), delphinidin 3,5-diglucoside (2.36–63.07 mg/L), pelargonidin 3-glucoside (0.26–1.36 mg/L), pelargonidin 3,5-diglucoside (0.01–8.11 mg/L), cyanidin 3-glucoside (5.78–30.38 mg/L), and cyanidin 3,5-diglucoside (4.39–166.32 mg/L). The effect of storage time of unprocessed and pasteurized juices on ACs content of four selected varieties was also studied. Average degradation percentage of each AC was between 23.0 and 83.0% during 10 days at 4 °C. Moreover, in pasteurized juices average degradation of ACs was 42.8 ± 0.5% after 10 weeks storage at 4 °C.     

Pd/Cu-Free Cobalt-Catalyzed Suzuki and Heck Using Green Bio-Magnetic Hybrid and DFT-Based Theoretical Study

Catalysis Letters - Several highly efficient and magnetically recyclable cobalt catalytic systems were prepared using magnetic chitosan and some safe and available organic compounds...     

Analytical Modeling of Short-Channel Fully-Depleted Triple Work Function Metal Gate (TWFMG) SOI MESFET

Silicon - In this paper, a new structure: triple work function metal gate SOI MESFET, intended for integration into the deep-submicron CMOS technology, is proposed. The gate of the device consists...     

Implementing a one-bit reversible full adder using quantum-dot cellular automata

Quantum-dot cellular automata (QCA) technique is one of the emerging and promising nanotechnologies. It has considerable advantages versus CMOS technology in various aspects such as extremely low power dissipation, high operating frequency and small size. In this paper, designing of a one-bit full adder is investigated using a QCA implementation of Toffoli and Fredkin gates. Then, a full adder design with reversible QCA1 gates is proposed regarding to overhead and power savings. Our proposed full adder design is more preferable when considering both circuit area and speed. The proposed design uses only two QCA1 gates and maximizes the circuit density and focuses on a layout of the circuit which is minimal in using QCA cells.     

Preparation and characterization of poly(vinyl alcohol)/gum tragacanth/cellulose nanocomposite film

The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film.     

Face recognition using adaptively weighted patch PZM array from a single exemplar image per person

Though numerous approaches have been proposed for face recognition, little attention is given to the moment-based face recognition techniques. In this paper we propose a novel face recognition approach based on adaptively weighted patch pseudo Zernike moment array (AWPPZMA) when only one exemplar image per person is available. In this approach, a face image is represented as an array of patch pseudo Zernike moments (PPZM) extracted from a partitioned face image containing moment information of local areas instead of global information of a face. An adaptively weighting scheme is used to assign proper weights to each PPZM to adjust the contribution of each local area of a face in terms of the quantity of identity information that a patch contains and the likelihood of a patch is occluded. An extensive experimental investigation is conducted using AR and Yale face databases covering face recognition under controlled/ideal conditions, different illumination conditions, different facial expressions and partial occlusion. The system performance is compared with the performance of four benchmark approaches. The encouraging experimental results demonstrate that moments can be used for face recognition and patch-based moment array provides a novel way for face representation and recognition in single model databases.     

Wide band resonant ultrasound spectroscopy of spheroidal modes for high accuracy estimation of Poisson coefficient of balls

An original inversion method specifically adapted to the estimation of Poisson coefficient of balls by using their resonance spectra is described. From the study of their elastic vibrations, it is possible to accurately characterize the balls. The proposed methodology can create both spheroidal modes in the balls and detect such vibrations over a large frequency range. Experimentally, by using both an ultrasonic probe for the emission (piezoelectric transducer) and a heterodyne optic probe for the reception (interferometer), it was possible to take spectroscopic measurements of spheroidal vibrations over a large frequency range (100 kHz-45 MHz) in a continuous regime. This method, which uses ratios between wave resonance frequencies, allows the Poisson coefficient to be determined independently of Young's modulus and the ball's radius and density. This has the advantage of providing highly accurate estimations of Poisson coefficient (+/-4.3 x 10(-4)) over a wide frequency range.     

A Fuzzy Logic-Based Method for Replica Placement in the Peer to Peer Cloud Using an Optimization Algorithm

The Peer to Peer-Cloud (P2P-Cloud) is a suitable alternative to distributed cloud-based or peer-to-peer (P2P)-based content on a large scale. The P2P-Cloud is used in many applications such as IPTV, Video-On-Demand, and so on. In the P2P-Cloud network, overload is a common problem during overcrowds. If a node receives many requests simultaneously, the node may not be able to respond quickly to user requests, and this access latency in P2P-Cloud networks is a major problem for their users. The replication method in P2P-Cloud environments reduces the time to access and uses network bandwidth by making multiple data copies in diverse locations. The replication improves access to the information and increases the reliability of the system. The data replication's main problem is identifying the best possible placement of replica data nodes based on user requests for data access time and an NP-hard optimization problem. This paper proposes a new replica replacement to improve average access time and replica cost using fuzzy logic and Ant Colony Optimization algorithm. Ants can find the shortest path to discover the optimal node to place the duplicate file with the least access time latency. The fuzzy module evaluates the historical information of each node to analyze the pheromone value per iteration. The fuzzy membership function is also used to determine each node's degree based on the four characteristics. The simulation results showed that the access time and replica cost are improved compared to other replica replacement algorithms.