A multigrid accelerated hybrid unstructured mesh method for 3D compressible turbulent flow

 A cell vertex finite volume method for the solution of steady compressible turbulent flow problems on unstructured hybrid meshes of tetrahedra, prisms, pyramids and hexahedra is described. These hybrid meshes are constructed by firstly discretising the computational domain using tetrahedral elements and then by merging certain tetrahedra. A one equation turbulence model is employed and the solution of the steady flow equations is obtained by explicit relaxation. The solution process is accelerated by the addition of a multigrid method, in which the coarse meshes are generated by agglomeration, and by parallelisation. The approach is shown to be effective for the simulation of a number of 3D flows of current practical interest. Sponsored by The Research Council of Norway, project number 125676/410 Dedicated to the memory of Prof. Mike Crisfield, a respected colleague     

Defocusing image to pattern contact holes using attenuated phase shift masks

The patterning of contact holes by selecting out-of-focus image plane (defocus) using attenuated phase shift masks (APSM) has been studied. Defocus is found to enhance the image modulation at low partial coherence for contact holes with negative local average of mask function. Semi-dense holes up to 130 nm in 8% APSM have been printed by 0.5 μm defocus at a partial coherence of 0.31 using KrF scanner with highest numerical aperture of 0.68. However, these holes were closed with in-focus imaging. Defocus is also found to be beneficial for patterning the pitches that have extensive side lobes with in-focus imaging.     

Microstructure of Feta Cheese Made Using Different Cultures as Determined by Confocal Scanning Laser Microscopy

ABSTRACT: The objective of this work was to observe the microstructure of feta cheese using confocal scanning laser microscopy. Low fat cheese and cheese containing capsule-producing cultures were made. The protein network was observed using the reflectance mode of the confocal microscope. Fat was stained by Nile red dye diluted with whey. More even distribution of fat with a larger number of smaller globules was observed in cheese made with noncapsule-forming culture compared to that made with the capsule-forming culture. Nonfat cheese had compact structure when made with noncapsule-forming culture which contrasted with the open structure observed in cheese made with the capsule-forming culture     

Expression of three UDP-N-acetyl-alpha-D-galactosamine:polypeptide GalNAc N-acetylgalactosaminyltransferases in adenocarcinoma cell lines

The levels of mRNA expression of three UDP-N-acetyl-alpha-D-galactosamine:polypeptide GalNAc N-acetylgalactosaminyltransferases (GalNAc-transferases) were quantified for human adenocarcinoma cell lines from pancreas, colon, stomach, and breast. Two of the GalNAc-transferases, GalNAc-T1 and GalNAc-T2, were expressed constitutively and at low levels in most or all cell lines examined. A third GalNAc-transferase, GalNAc-T3, was differentially expressed. Well-differentiated adenocarcinoma cell lines expressed high levels and moderately differentiated cell lines expressed lower levels of GalNAc-T3. Cell lines classified as poorly differentiated failed to express GalNAc-T3 mRNA at levels that could be detected by Northern blot analysis. Differential expression of the GalNAc-T3 protein was confirmed in these cell lines by Western blotting. We propose that glycosylation in tumor cell lines may be regulated in part by differential expression of GalNAc-transferases, and we suggest that GalNAc-T3 gene expression may be a molecular indicator of differentiated adenocarcinoma.     

Frequency domain identification of Wiener models

This paper proposes a frequency domain algorithm for Wiener model identifications based on exploring the fundamental frequency and harmonics generated by the unknown nonlinearity. The convergence of the algorithm is established in the presence of white noise. No a priori knowledge of the structure of the nonlinearity is required and the linear part can be nonparametric.     

Some factors affecting the electrical properties of carbon-black-loaded butyl rubber during vulcanization

Butyl rubber mixtures loaded with 70 phr general purpose furnace black (GPF) and tetramethyl thiuram disulphide (TMTD)/S as vulcanizing system were prepared. The kinetics of their electrical conductivity development during the vulcanization process were followed by using an especially devised system. It was found that the increase in the electrical conductivity during vulcanization obeys an exponential growth function with time constant τ, which markedly decreases with increasing vulcanization temperature as well as with the efficiency of the vulcanizing system. After completion of the vulcanization process, about 80 min, the samples obtained possess reasonable stability and reproducibility of electrical conductivity.     

Activation process-dependent characteristics of novel thermionic oxide cathodes for CRT application

The emission and conductivity characteristics of oxide cathodes depend largely on the activation process. In this paper, the electrical properties of new type of oxide cathodes for cathode ray tube (CRT) application, supplied by LG Philips Displays, have been investigated in relation to different cathode activation regimes. The influence of the activation process over different durations has been investigated. A temperature of T=1425 K was chosen to be higher than the optimum cathode activation temperature (T=1200 K), and the other temperature of T=1125 K was lower than that. The electron activation energy (E) was found to vary in the range from 0.58 to 2.28 eV for cathodes activated at the higher temperature regime, and from 1.08 to 1.9 eV for those activated at the lower temperature regime. Scanning electron microscopy (SEM) and electron diffraction X-ray (EDX) analyses show a structural phase transformation in the oxide material that was activated at 1125 K for a period of 1-12 hours. The SEM mapping shows a large contamination of Ba in the top layer of oxide material. The activator agents tungsten and aluminum are found to penetrate into the BaO/spl bsol/SrO layer in two different ways.     

Complete mobile email management

Years have lapsed since the inauguration of the first Wireless Application Protocol (WAP) application. One of the main reasons for the lukewarm response so far may be attributed to the lack of a “Killer” application. Many companies and developers have attempted to replicate email services (an Internet Killer appplication) within the WAP realm, but till now, no significant success has been reported. This paper will first discuss on the key functions which are lacking in the present WAP-email service, and which are arguably necessary if a much larger user base is to be attracted to these services. A new system will be proposed which can enable the user to send files residing in a remote personal computer (PC) as attachments to his emails using WAP-enabled mobile devices. The implementation of the system will be presented in details. Issue relating to the connection to various types of email servers and the security of the system will also be addressed in the paper.