Switched-capacitor integrators with low finite-gain sensitivity

Compensated SC integrator stages are analysed and compared with respect to their sensitivities to finite amplifier gain effects. Simple single-stage amplifiers may be used in such circuits even in highly selective filtering applications. This may allow an extension of the present frequency range of SC circuits.     

On the determination of boundaries to manipulator workspaces

The accumulation of two independent, broadly applicable formulations for determining the boundary to manipulator workspaces, presented elsewhere, are compared in this paper. Insights gained from one method are used to explain behavior exhibited in the other. Results are also compared and validated. A numerical formulation based on continuation methods is used to map curves that are on the boundary of a manipulator workspace. Analytical criteria based on row rank deficiency criteria of the manipulator's analytical Jacobian are used to map a family of one-dimensional solution curves on the boundary. The other formulation, based on a similar rank-deficiency criteria, yields analytic boundaries parametrized in terms of surface patches on the boundary. Results concerning the applicability of the numerical method to open- and closed-loop systems are compared with those limited to the open-loop for the analytical method. Conclusions regarding the behavior of the manipulator on geometric entities characterized by singular curves, higher-order bifurcation points, and surfaces inside the workspace are drawn. Applicability of both methods and their limitations are also addressed.     

DNA analysis in hepatoblastoma by flow and image cytometry

BACKGROUND: In several types of tumors, including hepatocellular carcinoma, prognosis could be correlated with DNA ploidy. Few studies have been performed on hepatoblastoma with contradictory results. METHODS: Twenty-nine cases of nonpretreated hepatoblastoma were studied with flow cytometry and image cytometry for DNA index and proliferation index using paraffin-embedded tissue. RESULTS: Twenty-three (79.9%) tumors were diploid, and 6 (20.7%) were aneuploid (hyperdiploid). Patients with diploid tumors were younger than those with aneuploid tumors. With regard to stage, diploid tumors were almost equally distributed among stages (tumor, lymph node metastases, distant metastases), whereas aneuploid tumors tended to occur in higher stages (tumor, lymph node metastases, distant metastases). Diploid tumors had clearly a better prognosis than aneuploid tumors, although the difference was not statistically significant (flow cytometry, P = 0.06; image cytometry, P = 0.16). A more favorable prognosis was also noted for hepatoblastomas with low-proliferation index (< or = 7%), but the difference from tumors with high-proliferation index (> 7%) again was not statistically significant (P = 0.16). CONCLUSIONS: Although no statistically significant differences in prognosis between hepatoblastomas with diploid and aneuploid DNA content, respectively, were found, there is a clear tendency that diploid hepatoblastomas behave more favorably. The same is true for hepatoblastomas with low-proliferation index.     

An experimental evaluation of traumatic globe rupture

PURPOSE: The purpose of this investigation was to evaluate the surgeon's ability to assess various types of globe injury, to determine the force necessary to rupture the globe with these types of injuries, and to determine typical orbital retraction forces used in the clinical setting. MATERIALS AND METHODS: Forty-four enucleated globes from recently killed cows were divided into four equal groups-one uninjured control group, one group with a through-and-through scleral laceration, another group with a subtotal scleral laceration, and the last group with an 18-gauge needle perforation. Twenty-seven boarded or board eligible oral and maxillofacial surgeons were asked to assess one sample from each of the four groups. They were then asked to retract a simulated globe on a custom-fabricated jig to determine clinical retraction forces. Ten globes from each of the four groups were then subjected to forces until rupture on an Instron 8501M mechanical testing unit. Accuracy of the clinical assessment was determined, and means and standard deviations of the retraction forces and globe rupture forces were derived. RESULTS: Through-and-through lacerations were assessed by surgeons with 100% accuracy, subtotal lacerations with 96% accuracy, uninjured globes with 74% accuracy, and perforated globes with 15% accuracy. Globe rupture occurred at 16.72+/-7.87 kg in the control group, 20.36+/-7.87 kg in the perforated group, 15.38+/-6.06 kg in the subtotal laceration group, and 4.94+/-2.56 kg in the through-and-through laceration group. Statistically significant differences (P < .001) were noted between the total laceration group and all other groups. The mean retraction force was 0.35+/-0.47 kg, which was statistically less than the force used in all of the rupture groups (P < .001). CONCLUSIONS: Severe injuries (through-and-through lacerations) were assessed with 100% accuracy by the clinicians, and less severe injuries with less accuracy. Rupture forces for globes with perforations and subtotal lacerations were no different than for the control group, but substantially less than for the total laceration group. The simulated clinical retraction forces were substantially more than the rupture forces in all of the groups, including the through-and-through laceration group.     

Silver versus white sheet as a back reflector for microcrystalline silicon solar cells deposited on LPCVD‐ZnO electrodes of various textures

We compare the performance of two back reflector designs on the optoelectrical properties of microcrystalline silicon solar cells. The first one consists of a 5‐µm‐thick low‐pressure chemical vapor deposition (LPCVD)‐ZnO electrode combined with a white sheet; the second one incorporates an Ag reflector deposited on a thin LPCVD‐ZnO layer (with thickness below 200 nm). For this latter design, the optical loss in the nano‐rough Ag reflector can be strongly reduced by smoothing the surface of the thin underlying ZnO layer, by means of an Ar‐plasma treatment. Because of its superior lateral conductivity, the thin‐ZnO/Ag back reflector design provides a higher fill factor than the dielectric back reflector design. When decreasing the roughness of the front electrode with respect to our standard front LPCVD‐ZnO layer, the electrical cell performance is improved; in addition, the implementation of the thin‐ZnO/Ag back reflector leads to a significant relative gain in light trapping. Applying this newly optimized combination of front and back electrodes, the conversion efficiency is improved from 8.9% up to 9.4%, for cells with an active‐layer thickness of only 1.1 µm. We thereby highlight the necessity to optimize simultaneously the front and back electrodes. Copyright © 2014 John Wiley & Sons, Ltd.     

低DCR检测电流模式控制器比电压模式控制器有更多优势

新一代微处理器和DSP需要以更低的工作电压提供更大的电流,因此电流检测元件的电阻需要尽可能小,以最大限度地降低电源传导损耗。然而,低电阻电流检测元件产生的斜坡电压较低,这在使用电流模式控制器时,不利于稳定运行。低斜坡电压导致采用电流模式控制方法的开关电源有显著抖动,在很多应用中,开关电源可能变得不稳定。因此,通常由电压模式控制器取而代之,尽管电压模式控制器也有不足之处,并可能出现可靠性问题。本文提出了一种新的电流模式双输出DC/DC降压型控制器,解决了此问题。     

Anterior interosseus nerve syndrome

A prolonged period of illness in a patient showing symptoms of reflexdystrophy is described. After going through several examinations and finally being referred to a pain clinic the patient demanded a second opinion from an orthopaedic surgeon. Her symptoms turned out to have been caused by a compression syndrome of the anterior interosseus nerve.