Absolute Measurements of the Magnetic Field Generated by Different Coils in the Center of EGYPTOR Tokamak

The present work is devoted to measure the absolute magnetic field produced by different coils in the EGYPTOR tokamak using a calibrated pickup coil. Scaling these measurements in different equations connected with the discharge currents from each supply system are performed. The pickup coil used in the present study is well calibrated with Helmholz coils at the IPP in Prague, Czech Republic. A 0.2% deviation has been found between an evaluation done in the present study and the calibration using Helmholz coils. Experimental measurements of the toroidal magnetic field are in good agreement with calculations to within 2%. Very low values of stray magnetic field components arising from TF and OH coils are recorded which proves that the compensation coils for these components are sufficient.     

Proactive resource allocation for asynchronous real-time distributed systems in the presence of processor failures

We present two proactive resource allocation algorithms, RBA^*-FT and OBA-FT, for fault-tolerant asynchronous real-time distributed systems. The algorithms consider an application model where task timeliness is specified by Jensen's benefit functions and the anticipated application workload during future time intervals is described by adaptation functions. In addition, we assume that reliability functions of processors are available a priori. Given these models, our objective is to maximize aggregate task benefit and minimize aggregate missed deadline ratio in the presence of processor failures. Since determining the optimal solution is computationally intractable, the algorithms heuristically compute sub-optimal resource allocations, but in polynomial time. Experimental results reveal that RBA^*-FT and OBA-FT outperform their non-fault-tolerant counterparts in the presence of processor failures. Furthermore, RBA^*-FT performs better than OBA-FT, although OBA-FT incurs better worst-case and amortized computational costs. Finally, we observe that both algorithms robustly withstand errors in the estimation of anticipated failures.     

Screening for diabetic retinopathy: the utility of nonmydriatic retinal photography in Egyptian adults

BACKGROUND AND OBJECTIVE: Drug resistance has become a major cause of treatment failure in patients with acute leukemia. P-glycoprotein (Pgp), which is associated with the multidrug resistance (MDR) phenotype, has been reported to be an important predictor of treatment outcome. The aim of this study was to analyze the value of Pgp expression in bone marrow or peripheral blood as a predictor of the response to remission induction chemotherapy as well as the duration of remission in patients with de novo acute myeloid leukemia (AML). DESIGN AND METHODS: We examined the expression of Pgp in 82 patients with de novo AML using an immunocytochemical assay with the C219 monoclonal antibody. RESULTS: Twenty-seven of the 82 patients (33%) were C219-positive in from 1% to 100% of their cells. Thirteen cases (16%) showed a positive reaction in more than 50% of the leukemic cells. Only hyperleukocytosis was significantly associated with higher expression of Pgp. Although 8 of the 13 cases (62%) with more than 50% of cells having Pgp expression were CD34-positive, this association was not statistically significant. A univariate analysis of resistance to induction therapy showed a significantly higher resistance rate in patients with increased Pgp expression (P = 0.01) as well as in those patients with decreased reactivity to myeloperoxidase. The multivariate analysis revealed the independent prognostic value of Pgp expression. C219 reactivity did not have an influence on remission duration. INTERPRETATION AND CONCLUSIONS: Our data indicate that P-glycoprotein expression is a reliable marker of resistance to induction treatment in patients with de novo AML.     

Raycasting of Light Field Galleries from Volumetric Data

The paper describes a technique to generate high‐quality light field representations from volumetric data. We show how light field galleries can be created to give unexperienced audiences access to interactive high‐quality volume renditions. The proposed light field representation is lightweight with respect to storage and bandwidth capacity and is thus ideal as exchange format for visualization results, especially for web galleries. The approach expands an existing sphere‐hemisphere parameterization for the light field with per‐pixel depth. High‐quality paraboloid maps from volumetric data are generated using GPU‐based ray‐casting or slicing approaches. Different layers, such as isosurfaces, but not restricted to, can be generated independently and composited in real time. This allows the user to interactively explore the model and to change visibility parameters at run‐time.     

High-level user interfaces for transfer function design with semantics

Many sophisticated techniques for the visualization of volumetric data such as medical data have been published. While existing techniques are mature from a technical point of view, managing the complexity of visual parameters is still difficult for non-expert users. To this end, this paper presents new ideas to facilitate the specification of optical properties for direct volume rendering. We introduce an additional level of abstraction for parametric models of transfer functions. The proposed framework allows visualization experts to design high-level transfer function models which can intuitively be used by non-expert users. The results are user interfaces which provide semantic information for specialized visualization problems. The proposed method is based on principal component analysis as well as on concepts borrowed from computer animation.     

Some Generalised Characteristics of the Electro-dynamics of the Plasma Focus in Its Axial Phase: Illustrated by an Application to Independantly Determine the Drive Current Fraction and the Mass Swept-Up Fraction

We describe the axial phase of the Mather plasma focus by two coupled equations of motion and circuit. We non-dimensionalised these equations resulting in two coupled equations which are characterised by only three scaling parameters α, β and δ which are ratios of electrical to transit times, inductances and impedances respectively. The normalised current waveform, trajectory and speed profile are unique for each combination of α, β, δ which are the ratios of characteristic times (electrical discharge vs. axial transit), inductances (tube inductance vs. static inductance) and impedances (stray resistance vs. electrical surge impedance). This leads to important information and insight into various aspects of the axial phase. In the present work we show that in a time-matched plasma focus shot we deduce the value of axial phase current fraction f_c simply by measuring the calibrated voltage waveform and the uncalibrated current waveform. The scaling parameters β and δ are fixed; and by form-fitting the measured current waveform to the normalised current waveform using the value of α of the shot is determined uniquely; from which the peak current and the ratio of peak to average speed [the speed form factor (SFF)] are obtained. The average transit speed is measured by time-of-flight using the voltage upturn as indicator of end of axial phase. Then the SFF yields the peak speed. The measured voltage (back EMF), peak current and peak axial speed (all at the end of axial phase) allows the unambiguous measurement of f_c. The value of the mass swept-up fraction f_m is deduced from α which is the ratio of the characteristic discharge and the characteristic transit times, both deduced during the non-dimensionalisation of the equations. Analysis of a time-matched shot in the INTI PF at 15 kV, 3 Torr D₂ gave f_c = 0.68 and f_m = 0.05.     

An investigation of three novel nonionic surfactants as corrosion inhibitor for carbon steel in 0.5 M H2SO4

The inhibition effect of three novel nonionic surfactants, 2-((alkylimino)methyl)phenyl bis(53-hydroxy-3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51-heptadecaoxatripentacontyl) phosphate (I–III), on the corrosion of carbon steel in 0.5 M H₂SO₄ was studied by polarization, EIS and weight loss measurements. It was found that all the inhibitors were effective inhibitors and their inhibition efficiency was significantly increased with increasing both concentration and temperature. Polarization curves revealed that the used inhibitors represent mixed-type inhibitors. Adsorption of used inhibitors led to a reduction in the double layer capacitance and an increase in the charge transfer resistance. Adsorption of used compounds was found to obey Langmuir isotherm and showed a chemical mechanism.     

A Multi-objective Optimization for Sizing and Placement of Voltage-controlled Distributed Generation Using Supervised Big Bang–Big Crunch Method

Abstract—This article presents an efficient multi-objective optimization approach based on the supervised big bang–big crunch method for optimal planning of dispatchable distributed generator. The proposed approach aims to enhance the system performance indices by optimal sizing and placement of distributed generators connected to balanced/unbalanced distribution networks. The distributed generation units in the proposed algorithms are modeled as a voltage-controlled node with the flexibility to be converted to a constant power node in the case of reactive power limit violation. The proposed algorithm is implemented in the MATLAB (The MathWorks, Natick, Massachusetts, USA) environment, and the simulation studies are performed on IEEE 69-bus and IEEE 123-node distribution test systems. Validation of the proposed method is done by comparing the results with published results obtained from other competing methods, and the consequent discussions prove the effectiveness of the proposed approach.     

Adsorption and inhibition effect of novel cationic surfactant for pipelines carbon steel in acidic solution

A new cationic surfactant was prepared and examined as an inhibitor for the corrosion of carbon steel in 1.0 M HCl solution using weight loss measurements, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements. The chemical structure of the prepared cationic surfactants has been proven by FTIR spectra. The inhibiting effect of the cationic surfactant as a result of the formation of the protective layer adsorbed on the carbon steel surface The adsorption of the inhibitor was discussed accordingly to the Langmuir isotherm. Polarization data indicated that the cationic surfactant is a mixed-type inhibitor.. The effect of temperature on the corrosion rate of carbon steel in1. 0 M HCl solution devoid of and containing the novel cationic surfactant was examined and thermodynamic parameters were computed. Some surface parameters were calculated and explained.