石英砂加载混凝工艺的DOM去除特征与混凝机理

为处理未纳入管网的市政污水,采用石英砂加载混凝工艺,考察石英砂的粒径及其投加量对处理效能的影响,分析了溶解性有机物(dissolved organic matters,DOM)的去除特征,并探讨了石英砂加载混凝机理。结果表明,与常规混凝相比,当石英砂的粒径和投加量分别为200目和 1.0 mg/L 时,石英砂加载混凝工艺对污水中浊度、COD的去除率分别为97.55%、59.2%,优于常规混凝;石英砂加载混凝工艺可明显去除芳香类、共轭双键、疏水性有机物,主要促进了腐殖质类物质的削减;石英砂通过架桥作用增加了絮体的密度,进而显著改善了絮体的沉降性能、强度;絮体的沉降性能、强度及再稳性能随着石英砂粒径的降低而升高。     

电网故障下光伏并网低压故障穿越控制策略的研究

电网发生故障或扰动可能造成光伏并网点电压跌落,严重影响电力系统的安全运行,光伏发电站有必要具备在电压跌落范围和时间内保证不脱网运行的能力。提出一种基于无功补偿的光伏并网低压穿越控制策略。该方法在检测到电压跌落时,通过断开外部电压环路将双闭环控制模式更改为单电流环路操作模式,采用改进后的无功补偿控制策略防止逆变器产生过电流,为电网电压提供无功补偿,较好实现不脱网运行。最后利用Matlab / Simulink软件比较和分析低压穿越控制策略前后的相关参数。仿真结果表明,改进的控制策略可以有效地抑制逆变器输出电流的增加,并且能提供无功功率来支持电网电压,以在电网电压骤降期间实现低压穿越。     

有机硅氧烷改性水性聚氨酯的合成

采用有机硅氧烷单体与聚醚、二羟甲基丙酸（DMPA）和甲苯二异氰酸酯（TDI）反应制备水性聚氨酯涂料。研究结果表明采用后添加有机硅氧烷单体的合成工艺，可制备贮存稳定好的水性聚氨酯乳液；凝胶渗透色谱（GPC）分析表明有机硅氧烷改性水性聚氨酯提高了聚氨酯的相对分子质量；性能测试表明有机硅氧烷改性水性聚氨酯涂料具有明显的优点：涂膜硬度高，耐沾污性、耐水性好和耐溶剂性好。     

沥青混凝土心墙坝渗漏检测及防渗体系修复综述

针对部分沥青混凝土心墙坝出现渗漏情况,为判定沥青混凝土心墙坝渗漏的部位及通道,需采用多种检测方法对坝体渗漏情况进行综合分析和判定。列举了多个工程应用实例,对沥青混凝土心墙坝渗漏检测方法如水下声纳检测、孔内彩电观测、示踪连通试验、坝体内水位分析和物探检测,以及混凝土防渗墙和控制灌浆修复坝体防渗体系方案及其影响因素进行了综述,以期为类似工程提供借鉴。     

A computationally efficient norm optimal iterative learning control approach for LTV systems

This paper proposes a computationally efficient iterative learning control (ILC) approach termed non-lifted norm optimal ILC (N-NOILC). The objective is to remove the computational complexity issues of previous 2-norm optimal ILC approaches, which are based on lifted system techniques, while retaining the iteration domain convergence properties. The computational complexity needed to implement the proposed method scales linearly with the trial length. Therefore, the approach can be implemented on controlled processes having long trial durations and high sampling rates. Robustness is accomplished by adding a penalty term on the control input in the cost function. Simulations are presented to verify and validate the features of the proposed method.     

改性水性硝化纤维素乳液研究

采用醇酸树脂转相乳化法和丙烯酸酯类单体互穿聚合物网络聚合法制备改性硝化纤维素乳液。研究了醇酸树脂、丙烯酸酯类单体乳化剂用量等因素对乳液性能的影响。结果表明，丙烯酸酯类单体改性互穿聚合物网络聚合法制得的乳液效果好.     

Influence of carboxyl groups on the particle size and rheological properties of polyacrylate latices

The PAL was synthesized with BA,MMA and some monomers containing carboxyl groups(for example,acrylic acid(AA) and methacrylic acid(MAA)) as co-monomers by semi-continuous seeded emulsion polymerization technique.The influences of alkalinization temperature,the feeding manner of AA or MAA on the particles size,rheological properties and carboxyl distribution of the latex were discussed,and the rheological mechanism was analyzed.The experimental results show that the PAL system has preferable viscosity and particle size when the alkalinization temperature is 50 ℃.Different distribution of carboxyl group in the particles and different resultant rheological properties are obtained by different feeding manner of AA or MAA into the system.The TEM images show that the particle is a smooth globe with carboxyl group concentrating on the surface and stabilized with electric double layer and nonionic adsorbed layer.The concentration of carboxyl functional group on the surface of particles can be achieved by the specific polymerization technique.The rheologyical properties are determined by accretion of particle volume and variation of the two phase volume ratio resulted from the carboxyl group spreading layer.     

冲积河流推移质输沙最优河道形态影响因素理论分析

为从理论上确定水沙动力、阻力和边界条件对冲积河流推移质输沙最优河道形态和最小比降的影响,基于 水力半径分割方法将河床整体糙率划分为河岸糙率和河底糙率;采用河道形态自动调整变分方法,以等腰梯形为 河道过水断面,推导推移质输沙率与河道形态的关系,分析河岸与河底相对糙率、河岸坡角、流量、输沙率、中值 粒径和河底糙率对最优河道形态和最小比降的影响。结果表明：最优河道形态和最小比降随河岸与河底相对糙 率的增大而减小,随河岸坡角的增大而增大。流量或者河底糙率的增加将使最小比降减小,同时造成最优河道形 态趋向窄深。输沙率或者中值粒径的增加将使最小比降增大,但两者对最优河道形态演变的影响不同,输沙率增 大将使最优河道形态向宽浅发展,而中值粒径增加将使最优河道形态向窄深发展。     

Study on polyurethane-acrylate/cerium dioxide modified by 3-(Methylacryloxyl)propyltrimethoxy silane and its UV absorption property

Firstly, cerium dioxide(CeO₂) was modified by 3-(Methylacryloxyl)propyltrimethoxy silane (KH-570), and modified CeO₂ (mCeO₂) was prepared. Then poly (urethane-acrylate) was modified by mCeO₂, and poly (urethane-acrylate)/modified CeO₂ (PUA/mCeO₂) composites with ultraviolet absorption property were prepared. The morphology, thermal hydrophobicity, mechanical properties, optical properties, and UV-absorption properties of PUA/mCeO₂ composites were studied. XRD and SEM analysis showed that the modified CeO₂ had better dispersion in the matrix than that of pure CeO₂. Ultraviolet–visible spectrum and thermogravimetric analysis were used to characterize the optical properties and thermal stability of PUA/mCeO₂ composites. The results showed that with the increasing of the mCeO₂ content, the UV-absorption property of PUA/mCeO₂ composites was improved gradually. When the content of mCeO₂ is 3%, the absorption of ultraviolet of PUA/mCeO2 composites is about 5 times of pure PUA film, and the absorption band is mainly in the UVA section. The thermal stability of PUA/mCeO₂ composites was improved with the adding of mCeO₂. With the increasing of mCeO₂ content, the contact angle of PUA/mCeO₂ composites increased significantly. And the UV-absorption mechanism of PUA/mCeO₂ Composites was studied. UV-curable PUA/mCeO₂ composites have good UV absorption property and water resistance. They will be used in the sun screen and protect people's skin.