排序方式: 共有89条查询结果,搜索用时 0 毫秒
1.
Khalil Ghanbari Ali Akbar Golneshan Mohsen Yazdani Hesam Moghadasi Navid Malekian 《亚洲传热研究》2021,50(6):5697-5713
Nanofluids have been known as practical materials to ameliorate heat transfer within diverse industrial systems. The current work presents an empirical study on forced convection effects of Al2O3–water nanofluid within an annulus tube. A laminar flow regime has been considered to perform the experiment in high Reynolds number range using several concentrations of nanofluid. Also, the boundary conditions include a constant uniform heat flux applied on the outer shell and an adiabatic condition to the inner tube. Nanofluid particle is visualized with transmission electron microscopy to figure out the nanofluid particles. Additionally, the pressure drop is obtained by measuring the inlet and outlet pressure with respect to the ambient condition. The experimental results showed that adding nanoparticles to the base fluid will increase the heat transfer coefficient (HTC) and average Nusselt number. In addition, by increasing viscosity effects at maximum Reynolds number of 1140 and increasing nanofluid concentration from 1% to 4% (maximum performance at 4%), HTC increases by 18%. 相似文献
2.
Methane/natural gas storage and delivered capacity for activated carbons in dry and wet conditions 总被引:1,自引:0,他引:1
Methane/natural gas storage and delivered capacity for three different activated carbons in dry and wet conditions were measured. In all tests the temperature of the bed was maintained constant at 277.15 K and pressure was increased up to 10 MPa. Natural gas storage capacity was less than methane storage capacity in dry conditions for all the three activated carbons tested, while the gas delivery was almost the same. One of activated carbon tested (NC120) showed the possibility of hydrate forming for pressures higher than 4 MPa but the amount of gas stored still was less than the amount stored in dry conditions over the whole range of pressure. The analysis of the gas delivered at each pressure steps shows that considerable amount of heavy components do not come out from the bed even at very low pressures in both dry and wet condition tests. Repeatability of the sorption/desorption processes - vital for possible commercial/industrial use - has been examined over various cycles. 相似文献
3.
Hesam Sagha Feipeng Li Ehsan Variani José del R. Millán Ricardo Chavarriaga Björn Schuller 《International Journal of Speech Technology》2016,19(4):669-675
Multi-stream automatic speech recognition (MS-ASR) has been confirmed to boost the recognition performance in noisy conditions. In this system, the generation and the fusion of the streams are the essential parts and need to be designed in such a way to reduce the effect of noise on the final decision. This paper shows how to improve the performance of the MS-ASR by targeting two questions; (1) How many streams are to be combined, and (2) how to combine them. First, we propose a novel approach based on stream reliability to select the number of streams to be fused. Second, a fusion method based on Parallel Hidden Markov Models is introduced. Applying the method on two datasets (TIMIT and RATS) with different noises, we show an improvement of MS-ASR. 相似文献
4.
DEHKORDI Behzad Ghadiri MOGHADDAM Hesam Sarvghad JAFARI Hamed Houri 《水动力学研究与进展(B辑)》2011,23(1):114-126
In this article,the 2-D unsteady viscous flow around two circular cylinders in a tandem arrangement is numerically simulated in order to study the characteristics of the flow in both laminar and turbulent regimes.The method applied alternatively is based on the finite volume method on a Cartesian-staggered grid.The great source term technique is employed to identify the cylinders placed in the flow field.To apply the boundary conditions,the ghost-cell technique is used.The implemented computational method is firstly validated through simulation of laminar and turbulent flows around a fixed circular cylinder.Finally,the flow around two circular cylinders in a tandem arrangement is simulated and analyzed.The flow visualization parameters,the Strouhal numbers,and drag and lift coefficients are comprehensively presented and compared for different cases in order to reveal the effect of the Reynolds number and gap spacing on the behavior of the flow.The obtained results have shown two completely distinct flow characteristics in laminar and turbulent regimes. 相似文献
5.
Transesterification of Canola Oil to Biodiesel Using CaO/Talc Nanopowder as a Mixed Oxide Catalyst
下载免费PDF全文
![点击此处可从《化学工程与技术》网站下载免费的PDF全文](/ch/ext_images/free.gif)
A series of heterogeneous catalysts including different molar ratios of CaO/talc was synthesized to study the transesterification reaction of canola oil and methanol under different reaction conditions. Characterization and kinetic results revealed that the activity of this catalyst was enhanced due to the increase of CaO/talc molar ratio value leading to an improvement in the biodiesel production. Moreover, the effect of various parameters on the activity of the undertaken catalysts was studied in order to determine the optimum process conditions. Leaching measurements and the durability of the CaO/talc catalyst under several reaction cycles were evaluated and proved it to be a stable catalyst. 相似文献
6.
Hesam Ghasemi Pierre J. Carreau Musa R. Kamal Seyed H. Tabatabaei 《Polymer Engineering and Science》2012,52(2):420-430
Polyethylene terephthalate (PET) nanocomposite films were prepared by cast extrusion followed by uniaxial stretching, using chill rolls. Transmission electron microscopy (TEM) and wide angle X‐ray diffraction (WAXD) showed that the clay layers were aligned in the machine direction (MD) in the PET/clay nanocomposite (PCN) films. Differential scanning calorimetry (DSC) showed that PCN films have higher crystallinity than the neat PET films, possibly due to the nucleating role of the silicate layers. The PCN films became hazier as the clay content increased, but the film transparency remained in the acceptable range. Oxygen permeability of the PCN films decreased by 23% compared to the neat PET film. This is comparable with predictions of models proposed in the literature. Silicate incorporation brought about 20% increase in the tensile modulus, while the puncture and tear propagation resistance were reduced, due to brittleness of the PCN films. The measured modulus (1.7 GPa) was somewhat smaller than the values predicted using the Pseudoinclusion model (2.1 GPa). POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers 相似文献
7.
Curing cycle modification for RTM6 to reduce hydrostatic residual tensile stress in 3D woven composites
下载免费PDF全文
![点击此处可从《应用聚合物科学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Triaxial residual tensile stresses resulting after cooling a 3D woven composite from the curing temperature cause cracking in the resin pockets for weave architectures that have high through‐the‐thickness constraint. We show how curing cycle modifications can reduce the hydrostatic tensile stress generated by thermal mismatch during cooling of Hexcel RTM6 epoxy resin constrained in a quartz tube which simulates extreme constraint in a composite. The modified curing schedule consists of a high temperature cure to just before the glass transition, a lower temperature hold that takes the resin through the glass transition thereby freezing in the zero stress state, followed by high temperature cure to bring the resin to full conversion. We show that this process is sensitive to heating rates and can reduce the zero stress state of non‐toughened RTM6 resin to a temperature similar to a commercial rubber‐toughened resin, Cycom PR520. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43373. 相似文献
8.
Erfan Khodabandeh Hesam Moghadasi Mohsen Saffari Pour Mikael Ersson P r G. J nsson Marc A. Rosen Alireza Rahbari 《中国化学工程学报》2020,28(4):1029-1038
This research investigates a numerical simulation of swirling turbulent non-premixed combustion. The effects on the combustion characteristics are examined with three turbulence models: namely as the Reynolds stress model, spectral turbulence analysis and Re-Normalization Group. In addition, the P-1 and discrete ordinate (DO) models are used to simulate the radiative heat transfer in this model. The governing equations associated with the required boundary conditions are solved using the numerical model. The accuracy of this model is validated with the published experimental data and the comparison elucidates that there is a reasonable agreement between the obtained values from this model and the corresponding experimental quantities. Among different models proposed in this research, the Reynolds stress model with the Probability Density Function (PDF) approach is more accurate (nearly up to 50%) than other turbulent models for a swirling flow field. Regarding the effect of radiative heat transfer model, it is observed that the discrete ordinate model is more precise than the P-1 model in anticipating the experimental behavior. This model is able to simulate the subcritical nature of the isothermal flow as well as the size and shape of the internal recirculation induced by the swirl due to combustion. 相似文献
9.
Hesam Dehghani Mahsa Zangeneh 《Energy Sources, Part B: Economics, Planning, and Policy》2018,13(7):328-339
The importance of crude oil in the world economy has made it imperative for efficient models to be designed for predicting future prices. This paper proposes an alternative approach based on a time series and biogeography-based optimization (BMMR–BBO) for the estimation of the West Texas Intermediate (WTI) crude oil price. To evaluate the forecasting ability of the presented model, we compared its performance with those of time series functions. The results of the experiment showed that BMMR-BBO performed better than the other methods and is a fairly good option for crude oil price prediction. The proposed model can be useful in the formulation of policies related to international crude oil price estimations, development plans, and industrial production. 相似文献
10.
In the present paper, the unsteady, viscous, incompressible and 2-D flow around two side-by-side circular cylinders was simulated using a Cartesian-staggered grid finite volume based method. A great-source term technique was employed to identify the solid bodies (cylinders) located in the flow field and boundary conditions were enforced by applying the ghost-cell technique. Finally, the characteristics of the flow around two side-by-side cylinders were comprehensively obtained through several computational simulations. The computational simulations were performed for different transverse gap ratios (1.5≤T/D≤4) in laminar (Re=100,200) and turbulent (Re=104) regimes, where T and D are the distance between the centers of cylinders and the diameter of cylinders, respectively. The Reynolds number is based on the diameter of cylinders,D. The pressure field and vorticity distributions along with the associated streamlines and the time histories of hydrodynamic forces were also calculated and analyzed for different gap ratios. Generally, different flow patterns were observed as the gap ratio and Reynolds number varied. Accordingly, the hydrodynamic forces showed irregular variations for small gaps while they took a regular pattern at higher spacing ratios. 相似文献