Ultrahigh-speed optical time-division-multiplexed transmissiontechnology based on optical signal processing

Recent progress in optical time-division-multiplexed (TDM) transmission technologies is reviewed including optical short pulse generation, time-division multiplexing/demultiplexing, timing extraction, and waveform measurement. The latest 400-Gbit/s transmission experiments based on optical signal processing are presented and the possibility of terabit/second TDM transmission is discussed     

DNA damage induced by m-phenylenediamine and its derivative in the presence of copper ion

We have previously reported that long-term priming of human polymorphonuclear neutrophilic granulocytes (PMN) with interferon-gamma (IFN-gamma) increased the fMLP-stimulated calcium influx. We now show that also after short-term incubation with IFN-gamma, PMN calcium metabolism is modulated. Single adherent cells in three different calcium-containing buffers (high, normal, and low [Ca2+]) were stimulated with the bacterial peptide fMLP or the Ca-ATPase inhibitor thapsigargin (Tg) after about 5 min preincubation with IFN-gamma. The results of this protocol indicated that IFN-gamma increases both calcium influx and calcium sequestration. Store dependent Ca2+ influx, directly measured on readdition of calcium to Tg-treated cells incubated in EGTA buffer, was significantly enhanced in IFN-gamma-treated cells. This effect of IFN-gamma was enhanced by the tyrosine kinase inhibitor herbimycin A. Strikingly, in low extracellular calcium concentrations, IFN-gamma induced calcium transients in 20%-60% of the cells. The proportion of PMN responding with Ca2+ transients increased with decreasing extracellular calcium concentration. Average lagtime from addition of IFN-gamma to a response that could be measured was 7.3 sec, and average increase in [Ca2+] above the basal level was 790 nM. These IFN-gamma-induced transients could not be depressed by herbimycin A. Thus, IFN-gamma can increase capacitative calcium influx, induce calcium transients, and possibly affect calcium sequestration in human PMN.     

Wortmannin, a specific inhibitor of phosphatidylinositol-3-kinase, inhibits erythropoietin-induced erythroid differentiation of K562 cells

We report a large kindred in which a punctate palmoplantar keratoderma (PPK) is associated with malignancy, including Hodgkin's disease, renal, breast, pancreatic and colonic adenocarcinomas. The family was traced through four generations, and over 320 individuals were identified, of whom 49 had punctate PPK. The punctate PPK appeared to be inherited as an autosomal dominant trait with variable penetrance. Ten of the 43 adults (23%) with punctate PPK developed malignancies, and five of these developed before the age of 50. Of the 271 unaffected individuals, six (2%) have developed malignancies, one prior to the age of 50. The association of keratoderma and malignancy is discussed.     

Cooperative behavior of various agents in dynamic environment

The multi-agent model is a model in which agents with limited ability cooperate each other to accomplish a goal. In this paper, we introduce a multi-agent model in which agents are created to imitate real ants. There are two different type of agents, each type of which has a particular task. We designed agents to communicate each other by using pheromone considering noise. On this model, we observed cooperative behavior of agents and evaluated conditions to make an order of behavior in the model.     

Pulse-width tunable, self-frequency conversion of short opticalpulses over 200 nm based on supercontinuum generation

Self-frequency conversion of ultrashort optical pulses into arbitrary multiwavelength components without the use of a pump is achieved by using supercontinuum generation. Frequency conversion of a randomly-modulated 1.535-1.560 μm, 2.5 ps pulse stream at 6.3 Gbit/s into 1.41-1.64 μm, 0.29-1.0 ps pulse streams is demonstrated for the first time. The method features ultrawide tunability of over 200 nm, and multiwavelength, pulsewidth-tunable output for flexible WDM distribution networks     

On approximate solutions for the deformation of plane anisotropic beams

Plane deformation of anisotropic beams with narrow rectangular cross sections exhibits coupling of stretching, bending and transverse shearing. For anisotropic cantilever beams with a stiff end-cap under end forces and an end couple, assessments were made for approximate solutions by comparing these with numerically exact finite element (FE) solutions. Specific attention is given to point-wise or approximate satisfaction of the end-fixity conditions. As approximate methodologies, (i) the elementary polynomial form of Airy's stress function for the plane stress problem in a rectangular region, (ii) a Timoshenko-type beam theory, and (iii) the Bernoulli-Euler beam theory were selected. Among these, only the polynomial form of Airy's stress function violates the point-wise end-fixity conditions. Both the polynomial Airy stress function and the Timoshenko-type beam theory successfully model the effects of transverse shear deformation and the coupling of stretching and transverse deflection. Analytical solutions demonstrate that the normal shear coupling effect increases linearly with the thickness-to-span ratios in axial normal stress and axial displacement, while the coupling manifests quadratically in transverse displacement. The comparison of end displacements with the numerically exact FE solutions indicates that the polynomial form of Airy's stress function is no better than the Timoshenko-type beam theory. Similar conclusions were reached for the problem of uniformly loaded cantilever beams. It has been found that the accurate prediction of the deformation of thick anisotropic beams with significant normal-shear coupling requires the use of higher order theories.     

Net shape formation of sub-micron alumina with reduced flaws by high-speed centrifugal compaction process

A new compacting method for powder materials is presented. High-Speed Centrifugal Compaction Process (HCP) utilizes centrifugal force of about 10,000 g for the compaction. HCP is suitable for net shape compaction of fine sub-micron and nano-powders. HCP possesses a unique compacting mechanism that is different from other colloidal processes including Pressure Casting (PC), and has a number of useful characteristics. HCP has a higher compacting speed than PC, wide applicability for net shape formation, as well as a defect removing function. Because of homogeneous and flawless green microstructure, HCP alumina shows superior sinterability and higher strength and hardness than most of other aluminas. This article is based on a presentation made in the symposium “The 3rd KIM-JIM Joint Symposium on Advanced Powder Materials“, held at Korea University, Seoul, Korea, October 26–27, 2001 under auspices of The Korean Institute of Metals and Materials and The Japan Institute of Metals.     

A new method for preparing high impact polypropylene and polyethylene

Summary The impact strength of polypropylene was improved by adding propylene-vinylsilane copolymer (PVS) in the presence of tris(triphenylphosphine)rhodium chloride(TPR). The impact strength of polyethylene at low temperature was also improved by adding TPR and PVS which is brittle at low temperature. These phenomena were not observed when polymers were mixed without TPR.     

New Preparation Method of CdS Clusters Encapsulated in Y-Type Zeolites

CdS clusters encapsulated in Y-type zeolite were prepared by a novel technique with non-aqueous systems. The mechanical mixture of CdCl₂· 2.5H₂O crystal with Y-type zeolite was heated at 773 K, followed by the H₂S treatment at 373 K, resulting in the formation of CdS clusters with the size <2.3 nm.