Kinetic analysis of plasma VLDL-TG and VLDL-remnant-TG turnover in anesthetized rats

We have estimated the turnover and relative pool sizes of nascent-VLDL-TG and VLDL-remnants-TG in anesthetized rats. [1-¹⁴C]Palmitoyl- and [2-³H]glyceryl-labeled “VLDL”-TG (including nascent VLDL-TG and VLDL-remnants-TG) were prepared by injecting labeled palmitate and glycerol into donor rats. Labeled serum from these rats was then injected intravenously into nembutalized male rats and serial blood samples taken for 30 min. Special care was taken to define any early components in the labeled “VLDL”-TG disappearance curves. In other experiments, the donors were rendered functionally hepatectomized 30 min after injection of³H-glycerol and the endogenous labeled VLDL-TG was allowed to circulate 30–60 min before collection of the TG-labeled VLDL-remnants-containing serum. The latter was injected into 4 recipient nembutalized rats and the remnant-TG-turnover measured by serial sampling as above. In two cases,¹⁴C-“VLDL” and³H-VLDL-remnants were injected as a single bolus into ether-anesthetized rats. Despite its complex composition, “VLDL”-TG in most cases disappeared in a single exponential fashion for 30 min with an average half-life of 5.9 min in nembutalized and 2.8 in ether-anesthetized rats. VLDL-remnants-TG showed a more complex behavior, but contained a major rapid component with a mean t_1/2 of ca. 1.5 min in both groups. The data, analyzed by multicompartmental analysis, were fitted to a simple model in which turnover of a larger nascent VLDL-TG pool with formation of a more rapidly turning over smaller pool of VLDL-remnant-TG is the rate-limiting step in overall TG removal from the d<1.006 fraction of rat serum. The data are consistent with our theoretical prediction that under these conditions the kinetics of the VLDL-remnants cannot be resolved from analysis of the total composite “VLDL” (nascent plus remnant) pool.     

Classification of non-alcoholic beer based on aftertaste sensory evaluation by chemometric tools

Sensory evaluation is the application of knowledge and skills derived from several different scientific and technical disciplines, physiology, chemistry, mathematics and statistics, human behavior, and knowledge about product preparation practices. This research was aimed to evaluate aftertaste sensory attributes of commercial non-alcoholic beer brands (P1, P2, P3, P4, P5, P6, P7) by several chemometric tools. These attributes were bitter, sour, sweet, fruity, liquorice, artificial, body, intensity and duration. The results showed that the data are in a good consistency. Therefore, the brands were statistically classified in several categories. Linear techniques as Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) were performed over the data that revealed all types of beer are well separated except a partial overlapping between zones corresponding to P4, P6 and P7. In this research, for the confirmation of the groups observed in PCA and in order to calculate the errors in calibration and in validation, PLS-DA technique was used. Based on the quantitative data of PLS-DA, the classification accuracy values were ranked within 49-86%. Moreover, it was found that the classification accuracy of LDA was much better than PCA. It shows that this trained sensory panel can discriminate among the samples except an overlapping between two types of beer. Also, two types of artificial networks were used: Probabilistic Neural Networks (PNN) with Radial Basis Functions (RBF) and FeedForward Networks with Back Propagation (BP) learning method. The highest classification success rate (correct predicted number over total number of measurements) of about 97% was obtained for RBF followed by 94% for BP. The results obtained in this study could be used as a reference for electronic nose and electronic tongue in beer quality control.     

Thermodynamic evaluation of integrated gasification combined cycle: Comparison between high‐ash and low‐ash coals

In the present study, a coal‐integrated gasification combined cycle power plant is simulated. A high‐ash coal and low‐ash coal are considered to compare the performance of the plant. The combined cycle is in typical commercial size with 450 MW capacity. The feeds are Tabas and Illinois #6 coals which approximately contain more than 30% and 10% ash and have higher heating values of 22.7 MJ/kg and 26.8 MJ/kg, respectively. Energy and exergy analyses are done by aspen plus ^® and ees , respectively. Energy analysis shows that the overall efficiencies of power plants using high‐ash and low‐ash coals are 33% and 28%, respectively. The result shows that in high‐ash case, 52 kg/s coal, 10 kg/s water, and 1050 kg/s air and in low‐ash case, 48 kg/s coal and 820 kg/s air are required for providing mentioned power, approximately. Exergy analysis shows that maximum exergy destruction is in heat recovery steam generator unit. Investigating the emissions shows that high percent of ash in the coal composition has slight effects on the IGCC pollution. Finally, from thermodynamic viewpoint, it is concluded that the high‐ash coal, like the conventional one, can be used as thermally efficient and environmentally compatible feed of IGCCs. Copyright © 2016 John Wiley & Sons, Ltd.     

Microscopic and macroscopic atomization characteristics of a pressure-swirl atomizer,injecting a viscous fuel oil

Combustion of heavy fuels is one of the main sources of greenhouse gases, particulate emissions, ashes, NOxand SOx. Gasification is an advanced and environmentally friendly process that generates combustible and clean gas products such as hydrogen. Some entrained flow gasifiers operate with Heavy Fuel Oil(HFO) feedstock. In this application, HFO atomization is very important in determining the performance and efficiency of the gasifiers.The atomization characteristics of HFO(Mazut) discharging from a pressure-swirl atomizer(PSA) are studied for different pressures difference(Δp) and temperatures in the atmospheric ambient. The investigated parameters include atomizer mass flow rate( _m), discharge coefficient(CD), spray cone angle(θ), breakup length(Lb), the unstable wavelength of undulations on the liquid sheet(λs), global and local SMD(sauter mean diameter) and size distribution of droplets. The characteristics of Mazut sheet breakup are deduced from the shadowgraph technique. The experiments on Mazut film breakup were compared with the predictions obtained from the liquid film breakup model. Validity of the theory for predicting maximum unstable wavelength was investigated for HFO(as a highly viscous liquid). A modification on the formulation of maximum unstable wavelength was presented for HFO. SMD decreases by getting far from the atomizer. The measurement for SMD and θ were compared with the available correlations. The comparisons of the available correlations with the measurements of SMD andθ show a good agreement for Ballester and Varde correlations, respectively. The results show that the experimental sizing data could be presented by Rosin-Rammler distributions very well at different pressure difference and temperatures.     

Successful Use of Geoelectrical Surveys in Area 3 of the Gol-e-Gohar Iron Ore Mine,Iran

Geoelectrical surveys were conducted in Area 3 of the Gol-e-Gohar iron ore mine to provide geological and hydrogeological information. Open pit mining is currently underway in the northern part of the Area, and underground mining operations are planned for the southern section. Groundwater has already been encountered in the open pit mine. Twenty five resistivity soundings were first performed in the mine area; then, induced polarization (IP) measurements were carried out to remove ambiguities between clay and water-bearing layers. To investigate fault zones as water conduits, combined resistivity profiling surveys were also carried out. These measurements provided a detailed structural map of the pit area. Resistivity and IP results have subsequently been confirmed by observations at three monitoring wells and the mine pit wall. Monitoring and piezometric wells will be drilled at locations suggested by the results of the geoelectrical surveys. Drainage galleries may be developed to dewater the open pit mine. However, another option being considered is to start the underground mining with the idea that it will initially simply serve as a dewatering mechanism.     

Effect of temperature on geosynthetic rutting performance in asphalt pavement

In this research study, a 3D finite element model using ABAQUS software is used to evaluate the rutting performance of reinforced asphalt pavement. In this research study, the effects of three types of geosynthetic layers on the optimum location are studied at temperatures of 20°C, 40°C, and 50°C. According to the model analysis, the middle of asphalt layer is determined as the optimized location of geosynthetic layers in the pavement structure. The results showed that the effect of geosynthetic layers on rutting performance increased with increasing elastic modulus of geosynthetic at high temperature of pavement.     

Combined Computational and Experimental Study on the Adsorption and Inhibition Effects of N2O2 Schiff Base on the Corrosion of API 5L Grade B Steel in 1 mol/L HCI

The electrochemical behavior of low carbon steel （API 5L grade B） in 1 mol/L HCI solution with different concentrations of N,Nr-bis（4-formylphenol）-trimethylenediamine Schiff base was studied by electrochemical techniques and density functional theory analysis. The inhibition efficiency was found to increase with increasing inhibitor concentration and decreased with increasing temperature. The high inhibition efficiency was attributed to the blocking of active sites by adsorption of inhibitor molecules on the steel surface. Thermodynamic parameters for the adsorption and activation processes were determined. Galvanostatic polarization data indicated that Schiff base act as a mixed-type inhibitor and the adsorption isotherm obeyed the Langmuir adsorption isotherm. Results obtained from quantum chemical studies show excellent correlations between the quantum chemical parameters and the experimental inhibition efficiencies using density functional theory at the B3LYP/6-31G（d,p） and B3LYP/3-21G basis set levels and ab initio calculations using HF/6-31G（d,p） and HF/3-21G methods.