水工混凝土修补技术应用

针对水工混凝土的老化病害,介绍了不同类型修补材料的特点、性能、适用范围,以及修补技术应用中的一些实例和经验。     

Quantitative analysis of Ni effect on CCT diagrams of novel air-cooled bainite steels using artificial neural network models

The quantitative effect of Ni content on continuous cooling transformation （CCT） diagrams of novel air-cooled bainite steels was analyzed using artificial neural network models. The results showed that Ni may retard the high- and medium-temperature transformation and martensite transformation. The results conform to the materials science theories.     

Effect of oxygen vacancies on transformation of zirconia at low temperatures

The effect of oxygen vacancy on the stability of phase structures and phase transformation of zirconia at low temperatures was studied using an electrochemical technique. It is suggested that the decrease of oxygen vacancies decreases the stability of metastable tetragonal zirconia and promotes its transformation to the monoclinic phase. This revised version was published online in November 2006 with corrections to the Cover Date.     

铸铁热分析用试样新型激冷剂的实验研究

从冷却曲线上相变段倾角最小原则出发，研究了新型激冷剂的配比与热分析法检测铸铁成分精度的关系，实验结果表明，能使相变段倾角最小的成分配比，也能提高对铸铁成分的热分析和检测精度。     

The critical pressure and impeding pressure of Al evaporation during induction skull melting processing of TiAl

In this article, two key pressures, the critical pressure P _crit and the impeding pressure P _impe of elemental evaporation, are defined and studied based on the calculation relationship between the evaporation loss rate N _m and the chamber pressure P during melting of titanium-aluminum alloys. When the chamber pressure is below P _crit or above P _impe, N _m tends to the maximum or the minimum value and remains almost unchanged. However, if P _crit<P<P _impe, with the increase of the chamber pressure, N _m declines sharply. A method has been put forward to calculate P _crit and P _impe of Al evaporation in a Ti-XAl (at pct) (X=25 to 50) melt. The calculation result shows that P _crit or P _impe is a second-order function of the molar percentage of Al and the melt temperature.     

一类连续时间广义边值系统的能控性和能观性

连续时间广义边值系统被描述为Ｅｘ（ｔ）＝Ａｘ（ｔ）＋Ｂｕ（ｔ），Ｖ０ｘ（０）＋Ｖｒｘ（Ｔ）＝ｖ，其中Ｅ是奇异方阵，ｕ（ｔ）满足任意次可微，本文讨论了一类连续时间广义边值系统的有关向内和向外边值过程的两个重要概念，并在此基础上给出了能控性和能观性定义和判别准则．     

SISAK快速化学分离装置的建立

SISAK(Short-lived Isotopes Studies by the AKUFVE technique)技术是目前使用最广泛的快速化学分离方法之一,主要应用在短寿命核素的分离和鉴别、超重元素的人工合成以及化学性质研究等方面的工作中.本文简单地叙述了SISAK技术的流程、原理和发展现状,介绍了自行建立的国内第一套基于SISAK技术的快速化学分离装置,并通过从裂变产物中分离短寿命核素这一实例验证了SISAK技术在快速化学分离中的优越性.     

圆形槽波导波长计的研究¹

圆形槽波导与高Q谐振腔相耦合可以用作毫米波波长计，本文应用网络分析和等效电路的方法对圆形槽波导波长计中的耦合结构进行了理论分析和计算。     

回旋管的应用研究

文章论述了推广回旋管应用中所碰到的高功率传输,模式变换和辐射尖锐的波束等技术难点,对现有的准光系统提出了改进措施。     

Effect of Traveling Magnetic Field on Mould-Filling Length of the A357 Melt during Casting THin Walled Plate

In order to improver the mould filling ability ,the method for production of thin-walled castings in the traveling magnetic field was applied,The relationship between magnetic field density and input voltage as well as distance was investigated,and the mould filling length of A357 melt has been studied,The electromagnetic forces applied on the melt were also analyzed,The result shows that the mould-filling length of the melt increase rapidly with the increase of magnetic flux density,The mould filling lengths in gypsum upper mould and magnetic material upper mould were compared from the standpoint of application,It demonstrated that the steel upper mould is superior to gypsum mould.