Two‐phase production of cyclohexene and cyclooctene oxides in water as an approach to pollution prevention

Liquid–liquid two‐phase epoxidation from cyclohexene and cyclooctene in aqueous potassium peroxymonosulfate (commercially available as Oxone^®) solution was studied as an application in pollution prevention. To avoid potential emissions of volatile organic compounds an aqueous solution was employed to replace the usual chlorinated solvents used in epoxide production. A droplet column reactor and stirred tank reactor were used to investigate two‐phase synthesis of epoxide. An aqueous Oxone^® solution was used to oxidize a dispersion of alkene droplets and form epoxide. The study of aqueous epoxidation in both reactors showed that the epoxidation of alkenes can be represented as a first order reaction with respect to alkene. The salting out effect of Oxone^® concentration was studied in both reactors and found to be very similar at optimal conditions. In comparing the two reactors, it was found that the droplet column reactor produces larger quantities of product per unit reactor volume for the same reaction time. The objective of this study is to provide an alternative reactor design and synthesis route that can meet pollution prevention goals. Copyright © 2004 Society of Chemical Industry     

Effect of starting particle size on hot-pressing of magnesium oxide powder prepared by vapour-phase oxidation process

Effect of starting particle size on hot-pressing of magnesium oxide (MgO) powder was examined using seven kinds of MgO powders prepared by a vapour-phase oxidation process; the average primary particle sizes were 11, 25, 32, 44, 57, 107 and 261 nm. These compressed powders (compacts) were hot-pressed at a temperature between 900 and 1300°C. The densifications of these compacts during the hot-pressing proceeded via (i) the sintering of primary particles within secondary particles and the rearrangement of secondary particles/grains (900°C), (ii) the gradual grain growth controlled by the pore migration (900∼1100°C) and (iii) the rapid grain growth due to the active mass transfer (1300°C); the grain sizes of MgO compacts hot-pressed at and below 1100°C were <1 μm, while those at 1300°C attained 20∼30 μm. The transluscent compact with the relative density of 99.7% could be obtained when the compressed powder with the average primary particle size of 44 nm was hot-pressed at a temperature as low as 1100°C for 1 h. This revised version was published online in November 2006 with corrections to the Cover Date.     

Influence of doping on the electronic structure of (La,Sr)2CuO4

High-statistics (>4 × 10⁸ counts), room-temperature measurements of the electron-positron momentum density of La_2?x Sr _x CuO₄ have been performed for samples with Sr concentrations of x=0.0, 0.1, 0.13, and 0.2. These spectra have been analyzed in conjunction with theoretical calculations of the electron-positron momentum density. The metallic samples show features consistent with the presence of a Fermi surface, but its evolution with increasing Sr concentration does not follow the predictions of band theory. These results may indicate the effects of electron-electron correlation on the electron momentum distribution in the Cu-O plane.     

Adaptive weighted outer-product learning associative memory

Associative-memory neural networks with adaptive weighted outer-product learning are proposed in this paper. For the correct recall of a fundamental memory (FM), a corresponding learning weight is attached and a parameter called signal-to-noise-ratio-gain (SNRG) is devised. The sufficient conditions for the learning weights and the SNRG's are derived. It is found both empirically and theoretically that the SNRG's have their own threshold values for correct recalls of the corresponding FM's. Based on the gradient-descent approach, several algorithms are constructed to adaptively find the optimal learning weights with reference to global- or local-error measure.     

Transformations for nonideal uniform circular arrays operating in correlated signal environments

The Davies transformation is a method to transform the steering vector of a uniform circular array (UCA) to one with Vandermonde form. As such, it allows techniques such as spatial smoothing for direction-of-arrival (DOA) estimation in a correlated signal environment, developed originally for uniform linear arrays, to be applied to UCAs. However, the Davies transformation can be highly sensitive to perturbations of the underlying array model. This paper presents a method for deriving a more robust transformation using optimization techniques. The effectiveness of the method is illustrated through a number of DOA estimation examples.     

Off flavours in large waterbodies: physics, chemistry and biology in synchrony.

The Laurentian Great Lakes of North America are a drinking water source for millions of Canadian and US consumers. These waterbodies have undergone extensive change over the past century as a result of widespread degradation and remediation. Many of the Lakes are prone to taste and odour (T&O), and although these outbreaks have been poorly monitored, evidence suggests that they are increasing in frequency. Tracing and controlling T&O in such large systems presents a challenging task, due to their physical size and complexity. This paper presents an overview of recent investigative and management approaches to T&O in Lake Ontario and its outflow, the St. Lawrence River. We have identified three distinct patterns of T&O in these source-waters, caused by geosmin and 2-methylisoborneol and differing in their planktonic and benthic sources, and temporal and spatial dynamics. Each pattern has required a different approach by scientists and management, in partnership with the water industry. We have shown these T&O outbreaks are caused and moderated by physical, chemical and biological mechanisms over a spectrum of spatial and temporal scales. Canadian municipalities affected by these outbreaks have been key to the investigation of the links between T&O and ecosystem processes with the aim to develop more proactive water treatment and long-term management.     

I-slot characteristics

I-shaped slots will fit entirely on the rectangular waveguide narrow wall without wrapping onto the broad wall. This slot type is suitable for single plane scan-phased arrays where element spacing, in the scan plane, is equal to or less than one-half wavelength. The method of moments solution for the I-slot is presented. Comparison of computed results with measured data illustrates the validity of this solution. To facilitate future designs, the waveguide scattering parameters and the radiation characteristics of I-slots are included     

Fracture behaviour of unmodified and rubber-modified epoxies under hydrostatic pressure

The fracture toughness and uniaxial tensile yield strengths of unmodified and CTBN-rubber-modified epoxies were measured under hydrostatic pressure. The purpose of these experiments was to learn how suppressing cavitation in rubber particles affects the deformation mechanisms and the fracture toughness of rubber-modified epoxy. It was found that the cavitation of CTBN-rubber could be suppressed at a relatively low pressure (between 30 and 38 M Pa). With cavitation suppressed, the rubber particles are unable to induce massive shearyielding in the epoxy matrix, and the fracture toughness of the rubber-modified epoxy is no higher than that of the unmodified epoxy in the pressure range studied. Unmodified epoxy shows a brittle-to-ductile transition in fracture toughness test. The reason for this transition is the postponement of the cracking process by applied pressure.Work performed while on a sabbatical leave at the University of Michigan.     

Trade-off analysis on cost and manufacturing technology of an electronic product: Case study

A trade-off analysis on the cost and system packaging metrics of an electronic product aimed at the commercial/retail industry has been carried out. By comparing the system cost and packaging metrics with those of comparable consumer products, we have determined that there is opportunity for significant cost, size, and weight reduction of the overall electronics packaging system. These include the use of fine pitch IC packages, smaller discrete components, denser PCB wiring technology, double sided IC package surface mount, surface mount connectors, and improved plastics for the product housing. The analysis concluded that PCB area reduction of 40%, using a single PCB instead of three boards, reduction in board cost of over 50% and product weight reduction of over 28% are possible using available technologies.