GUIDELINES FOR DESIGNING EIS INTERFACES Meeting Executives' Information Needs

For users of an executive information system (EIS), the EIS interface is the system and is crucial to the EIS's success. These guidelines for designing EIS interfaces are based on studies of actual EIS interfaces that meet the unique information needs of executives.     

Luminescence from praseodymium doped AlN thin films deposited by RF magnetron sputtering and the effect of material structure and thermal annealing on the luminescence

Thin films of Praseodymium doped AlN are deposited on silicon (111) substrates at 77 K and 950 K by rf magnetron sputtering method. About 500–1000 nm thick films are grown at 100–200 watts RF power and 5–8 mTorr nitrogen, using a metal target of Al with Pr. X-rays diffraction results show that films deposited at 77 K are amorphous and those deposited at 950 K are crystalline. Cathodoluminescence studies are performed at room temperature and luminescence peaks are observed in a wide range from ultraviolet to infrared region. The most intense peak is obtained in green at 526 nm from amorphous films as a result from ³P₁→³H₅ transition. In crystalline films the intense peak was obtain in red at 648 nm as a result from ³P₀→³F₂ transition. Films are thermally activated at 1300 K for half an hour in a nitrogen atmosphere. Thermal activation enhances the intensity of luminescence. Two peaks at 488 nm and 505 nm merged after thermal activation, giving rise to a single peak at 495 nm.     

Results of the ASTM field test of tristimulus weighting functions

In 1993, the American Society for Testing and Materials carried out a field test of newly calculated tristimulus weighting factors. These weighting factors had been calculated by a method proposed by Venable. the test also included a method of correction for bandpass dependence put forth by Stearns. the purpose of the trial was to assess the possible reduction in bandpass dependence introduced by each of these sets of weights. A large number of sets of spectral data were gathered from the cooperators in the field test. Results of integration by the various sets of tristimulus weighting factors were calculated. A total of 15 120 color differences were calculated and statistics were derived to test the probable error resulting from each method of correction. Errors attributable to bandpass dependence were on the order of a few tenths to as much as one CIELAB unit when uncorrected weight sets were used. These errors could be reduced to a few hundreths of a CIELAB unit, and in some cases to a few thousandths of a unit, by employing one correcting strategy or the other. an overall mix of strategies was ultimately chosen to minimize the bandpass dependence over the entire range of weight sets. Utilizing this mixed strategy, the median error introduced into 10-nm integration by bandpass dependence was only 0.004 CIELAB units. © 1995 John Wiley & Sons, Inc.     

Ruins and Revival: Paris in the Aftermath of the Second World War

Although many devastated European cities have been studied, the bombing and reconstruction of key industrial sites and certain suburban residential zones in greater Paris have received little scholarly attention. Using archival sources, this article explores both destruction and reconstruction, and traces how homeless families shared apartments or endured years of 'temporary' accommodation in huts and other shelters. Post-war economic planning in France privileged the restoration of industrial and commercial sites; rebuilding of housing by the state, by housing co-operatives and by individual property owners received less support and progressed far more slowly. Today, the visual legacy of reconstruction is easily confused with that of completely new post-war apartments; however its origin, if not its architecture, is distinctively different and merits recognition in its own right.     

Biocides used in building materials and their leaching behavior to sewer systems.

There is increasing concern about diffuse pollution of aquatic systems by biocides used in urban areas. We investigated sources and pathways of biocides significant for the pollution of storm water runoff. Main sources seem to be building envelopes, i.e. facades (paints, plasters) and roof sealing membranes. First results from a defined urban catchment drained by a separated sewer system without any agricultural activities reveal a substantial occurrence. Even after the first flush, concentrations of terbutryn, carbendazim, mecoprop as well as Irgarol 1051 and its metabolite exceeded the Swiss water quality standard of 0.1 microg/L. In laboratory experiments, leaching of mecoprop used as a root protection agent in bitumen sheets for roof waterproofing was determined. The concentrations differed in 16 different sheets two orders of magnitude, depending on the product composition. Using optimized products, it is expected to be the most efficient and sustainable way to reduce the environmental impact. To understand transport dynamics and environmental risk, further storm water events will be analyzed. Based on the ongoing project URBIC, first measures will be proposed to limit the release to surface and ground water.     

CAN IS AVOID MARGINALIZATION ?

Two major areas of concern for IS managers are the use of outsourcing and the often-expressed view that little competitive advantage has been gained from information processing. These developments have begun to mirror events in other professions from a bygone age. By looking outside the IS field for some perspective, we may avert a similar outcome and better define the role of IS in the organization.     

Enhancement of computed tomography liver contrast using iomeprol-containing liposomes and detection of small liver tumors in rats

RATIONALE AND OBJECTIVES: We evaluated iomeprol-containing liposomes (Lipiom), a new contrast medium for computed tomography (CT) liver scanning, in an animal model of chemically induced hepatocellular carcinomas and other liver tumors in rats. METHODS: Liver tumors were induced by administration of carcinogens to rats, either 0.55% (w/w) 1'-hydroxysafrole in the diet or induction by 3'-methyl-4-diethylaminoazobenzene followed by promotion with carbon tetrachloride. CT scanning was performed 1-3 hr after intravenous injection of iomeprol-containing liposomes. RESULTS: After injection of iomeprol-containing liposomes at a dose of 70 mg of liposome-entrapped iodine per kilogram of body weight, the normal liver parenchyma showed a contrast enhancement, in Hounsfield units, of more than 60% over the control value before bolus. Liver tumors with no or few Kupffer cells were not enhanced and appeared as dark areas within the normal parenchyma. Tumors and pretumoral lesions devoid of Kupffer cells, as small as 3 mm in diameter, could be distinguished using this non-invasive method. CONCLUSION: CT liver scanning after injection of iomeprol-containing liposomes appears to be promising method for detecting liver tumors and focal liver lesions.     

A variable radius roll adhesion test (VaRRAT) suitable for measuring the adhesion of paint to metal

Early trials and analysis of a new adhesion test are discussed. The test is designed for measuring the adhesion of paint to deformable steel sheets as used in building, automotive, and other cladding applications, and does not require detailed knowledge of the paint mechanical properties. A stiff overlay, such as an epoxy resin, is applied to the coating, and the steel substrate is peeled away using a roll of well-defined radius to which the steel substrate is constrained. The propagation of a crack within the paint or at some interface in the paint/metal system depends mostly on the mechanical properties and thickness of the overlay and the radius of the constraining roll. The test is shown to discriminate better than existing practical adhesion tests between paints of expected differing adhesion/cohesion, but also presents some inconsistencies that require further work to resolve. BHP Institute of Steel Processing and Products, Wollongong NSW 2522, Australia.