Towards an integrated neonatal brain and cardiac examination capability at 7 T: electromagnetic field simulations and early phantom experiments using an 8-channel dipole array

Objective

Neonatal brain and cardiac imaging would benefit from the increased signal-to-noise ratio levels at 7 T compared to lower field. Optimal performance might be achieved using purpose designed RF coil arrays. In this study, we introduce an 8-channel dipole array and investigate, using simulations, its RF performances for neonatal applications at 7 T.

Methods

The 8-channel dipole array was designed and evaluated for neonatal brain/cardiac configurations in terms of SAR efficiency (ratio between transmit-field and maximum specific-absorption-rate level) using adjusted dielectric properties for neonate. A birdcage coil operating in circularly polarized mode was simulated for comparison. Validation of the simulation model was performed on phantom for the coil array.

Results

The 8-channel dipole array demonstrated up to 46% higher SAR efficiency levels compared to the birdcage coil in neonatal configurations, as the specific-absorption-rate levels were alleviated. An averaged normalized root-mean-square-error of 6.7% was found between measured and simulated transmit field maps on phantom.

Conclusion

The 8-channel dipole array design integrated for neonatal brain and cardiac MR was successfully demonstrated, in simulation with coverage of the baby and increased SAR efficiency levels compared to the birdcage. We conclude that the 8Tx-dipole array promises safe operating procedures for MR imaging of neonatal brain and heart at 7 T.

     

Alpha-tocopherol as a modulator of smooth muscle cell proliferation

The effects of alpha-tocopherol and beta-tocopherol have been studied in rat and human aortic smooth muscle cells. Alpha-tocopherol, but not beta-tocopherol, inhibited smooth muscle cell proliferation and protein kinase C in a dose-dependent manner, at concentrations ranging from 10 to 50 microM. Beta-tocopherol added simultaneously with alpha-tocopherol prevented both proliferation and protein kinase C inhibition. Protein kinase C inhibition was cell cycle-dependent and it was prevented by okadaic acid, a protein phosphatase inhibitor. Protein kinase C activity measured from aortas of cholesterol-fed rabbits was also inhibited by alpha-tocopherol. By using protein kinase C (PKC) isoform-specific inhibitors and immunoprecipitation reactions it was found that PKC-alpha was selectively inhibited by alpha-tocopherol. Further, an activation of protein phosphatase 2A by alpha-tocopherol was found, which caused PKC-alpha dephosphorylation and inhibition. Ultimately, this cascade of events at the level of cell signal transduction leads to the inhibition of smooth muscle cell proliferation.     

A case of split notochord syndrome: presence of dorsal enteric diverticulum adjacent to the dorsal enteric fistula

Like umblical enteric remnants (eg, umblical sinus and omphalomesenteric fistula), enteric remnants can be seen on the dorsal aspect of the body (dorsal enteric sinus, dorsal enteric fistula IDEF], dorsal enteric diverticulum) in conjunction with complete cleft of the vertebral column. Complete cleft of the vertebral column associated with gastrointestinal tract and central nervous system anomalies is known as "split notochord syndrome" (SNS). The authors present an unreported variant of SNS having dorsal enteric diverticulum adjacent to the DEF. The patient died 17 days after surgical repair.     

Dynamic characterization and modification of dynamic properties of a micro scanner

Micro electro mechanical systems (MEMS) are used in many application areas in different disciplines and took their place among the most promising technologies. The performance of such systems is primarily related to their dynamical characteristics. This study presents the dynamic characterization techniques that are used to identify the modal parameters of a MEMS device and the methods that can be implemented to change its dynamic response. An electrostatic scanner is chosen as the case study to demonstrate the developed methodologies. Initially, the micro scanner is characterized using experimental modal analysis techniques to obtain frequency response function, modal damping, resonance frequencies, and mode shapes. Then, velocity and position feedback control loops are implemented to the scanner system to alter the damping and stiffness characteristics. A closed-loop Simulink model of the scanner is developed to verify the experimental measurements. Several curve fitting methods are used in order to have an accurate representation of the scanner system. Using the model, the influence of both position and velocity feedback on the effective damping, resonance frequency and the transient behavior of the scanner is investigated. The stability limits of the scanner under velocity feedback are also studied via numerical simulations. Based on the experimental and simulation results, the methodology developed in this study proves itself to be very efficient to alter the dynamical characteristics of the MEMS structures and it can be easily adapted to other MEMS applications.     

A set of new Chebyshev kernel functions for support vector machine pattern classification

In this study, we introduce a set of new kernel functions derived from the generalized Chebyshev polynomials. The proposed generalized Chebyshev polynomials allow us to derive different kernel functions. By using these polynomial functions, we generalize recently introduced Chebyshev kernel function for vector inputs and, as a result, we obtain a robust set of kernel functions for Support Vector Machine (SVM) classification. Thus in this study, besides clarifying how to apply the Chebyshev kernel functions on vector inputs, we also increase the generalization capability of the previously proposed Chebyshev kernels and show how to derive new kernel functions by using the generalized Chebyshev polynomials. The proposed set of kernel functions provides competitive performance when compared to all other common kernel functions on average for the simulation datasets. The results indicate that they can be used as a good alternative to other common kernel functions for SVM classification in order to obtain better accuracy. Moreover, test results show that the generalized Chebyshev kernel approaches to the minimum support vector number for classification in general.     

Evaluation of damage to light structures erected on a fill material rich in expansive soil

The paper reports a study of the cause of defects in light structures and the toppling of a wall constructed on a fill material rich in Ankara clay. Laboratory tests were carried out on vertical and horizontal samples from boreholes and a trial pit was excavated near the damaged structures. The results showed that in the vicinity of the toppled wall, swelling pressures in the horizontal direction were greater than those measured in the vertical direction. The swelling properties of the fill material were higher than those of original Ankara clay as determined previously by other investigators, suggesting that breakdown of the cementing bonds and a change in the fabric are the main factors affecting the swelling pressure of disturbed and compacted expansive soils. The calculations to predict uplift showed a good agreement with the observations in the damaged structures. It is concluded that swelling was the main cause of the damage to the light structures at the study site and resulted from the highly expansive nature of the fill material, poor drainage, the semi-arid climate, poor construction methods and ineffective precautions. Some recommendations for minimizing the effects of swelling at the study site are briefly outlined.     

Potential of peanut skin phenolic extract as antioxidative and antibacterial agent in cooked and raw ground beef

This study investigated the potential of peanut skin extract (PSE) as inhibitor of lipid oxidation in cooked and raw ground beef (GB) and as antimicrobial agent in raw GB. Results show that addition of PSE to raw GB before cooking significantly inhibited the formation of peroxides and TBARS in cooked GB during the refrigerated storage. PSE at concentration ≥0.06% was as effective as BHA/BHT at 0.02% in inhibiting lipid oxidation. PSE also inhibited the oxidation of meat pigments thereby preserving the fresh redness of treated meat when used at 0.02–0.10%. Microplate assay showed complete inhibition of test bacteria (Bacillus subtilis, Salmonella typhimurium, Staphylococcus aureus, Streptococcus faecalis and Escherichia coli) in the presence of PSE at 0.4% or higher. However, the antimicrobial effect of PSE in GB was less potent. Hence, PSE can primarily serve the dual purposes of preserving the colour of raw GB and preventing lipid oxidation in cooked products.     

Synthesis,Biochemistry, and Computational Studies of Brominated Thienyl Chalcones: A New Class of Reversible MAO‐B Inhibitors

A series of (2E)‐1‐(5‐bromothiophen‐2‐yl)‐3‐(para‐substituted phenyl)prop‐2‐en‐1‐ones ( TB1 – TB11 ) was synthesized and tested for inhibitory activity toward human monoamine oxidase (hMAO). All compounds were found to be competitive, selective, and reversible toward hMAO‐B except (2E)‐1‐(5‐bromothiophen‐2‐yl)‐3‐(4‐nitrophenyl)prop‐2‐en‐1‐one ( TB7 ) and (2E)‐1‐(5‐bromothiophen‐2‐yl)‐3‐(4‐chlorophenyl)prop‐2‐en‐1‐one ( TB8 ), which were selective inhibitors of hMAO‐A. The most potent compound, (2E)‐1‐(5‐bromothiophen‐2‐yl)‐3‐[4‐(dimethylamino)phenyl]prop‐2‐en‐1‐one ( TB5 ), showed the best inhibitory activity and higher selectivity toward hMAO‐B, with K_i and SI values of 0.11±0.01 μm and 13.18, respectively. PAMPA assays for all compounds were carried out in order to evaluate the capacity of the compounds to cross the blood–brain barrier. Moreover, the most potent MAO‐B inhibitor, TB5 , was found to be nontoxic at 5 and 25 μm , with 95.75 and 84.59 % viability among cells, respectively. Molecular docking simulations were carried out to understand the crucial interactions responsible for selectivity and potency.     

The influence of initial water curing on the strength development of ordinary portland and pozzolanic cement concretes

The effect of initial water-curing period on the strength properties of concretes was investigated. Three types of cement, one ordinary Portland cement (OPC) and two natural pozzolanic cements (blended and trass cements), were used in the concrete mixtures. Six different curing regimes were applied to the specimens, the first of which was continuous water storing, and the second continuous air storing. In the remaining four regimes, the specimens were stored under varying initial water-curing periods of 3, 7, 14, and 28 days, respectively. The compressive strength tests were carried out on the cubic specimens at the ages of 7, 14, 28, 90, and 180 days. The variation of compressive strength with time was evaluated by using a semilogarithmic function and the strength-gaining rates were calculated by using this equation for different curing conditions. It was found that poor curing conditions are more adversely effective on the strength of concretes made by pozzolanic cements than that of OPC, and it is necessary to apply water curing to the former concretes at least for the initial 7 days to expose the pozzolanic activity. However, when the pozzolanic cement concretes have sufficient initial curing, they can reach the strength of OPC concretes in reasonable periods of time.     

Investigation of electrochromic properties of poly(3,5-bis(4-methoxyphenyl)dithieno[3,2-b;2′,3′-d]thiophene)

Electropolymerization of 3,5-bis(4-methoxyphenyl)dithieno[3,2-b;2′,3′-d]thiophene BMPhDTT, having strong electron-donating methoxy groups, was performed, utilizing potentiodynamic method. The homopolymer was characterized by cyclic voltammetry (CV), Fourier transform infrared (FTIR) and UV–vis spectroscopy. Spectroelectrochemical and electrochromic properties of the homopolymer film were investigated and a PBMPhDTT/PEDOT device was constructed to understand its characteristics in detail. It was revealed that the potential range of 0.0–2.0 V is suitable for operating the device between yellow and blue colors. It indicated a good open circuit memory and stability.