10-Gb/s error-free transmission under optical reflection using isolator-free 1.3- /spl mu/m InP-based vertical-cavity surface-emitting lasers

Error-free transmission through 10-km single-mode fiber at 10 Gb/s under -13-dB optical reflections has been demonstrated for the first time using a directly modulated 1.3-/spl mu/m InP-based VCSEL without any optical isolator. The 13-GHz relaxation oscillation frequency and stable polarization suppresses relative intensity noise degradation under optical reflection. Only 1-dB error-free power penalty has been observed with optical reflection set with the worst polarization direction.     

Mechanical properties of sinter-forged Al2O3-ZrO2 ceramics

Two kinds of composites, Al₂O₃-25 wt% ZrO₂(2 mol% Y₂O₃) (Y-ZTA), Al₂O₃-25 wt% ZrO₂(8 mol% CeO₂) (Ce-ZTA) were produced by the sinter-forging process. The effect of presintering temperature on the mechanical properties of the composites was examined. The sinter-forging process increased the room-temperature bending strength in comparison with pressureless sintering, owing to the smaller grain size in sinter-forged bodies than in pressureless sintered ones. It was found necessary to keep the presintering temperature considerably lower than sinter-forging temperature in order to improve the room-temperature strength. The strength of sinter-forged Ce-ZTA was higher than that of sinter-forged Y-ZTA. The residual surface compressive stress induced by the phase transition during grinding in Ce-ZTA was found to be effective to further improve the strength and fracture toughness.     

Analysis of the IgE-epitope of Der f 2, a major mite allergen, by in vitro mutagenesis

Der f 2 is a major mite allergen composed of 129 amino acid residues. To determine the major epitopes on Der f 2 recognized by human IgE antibodies, artificial mutations were introduced to Der f 2 protein. The IgE-binding activity of Der f 2 was significantly decreased by deletion of 10 amino acids at the N-terminus or nine amino acids at the C-terminus. Site-directed mutagenesis with a single amino acid replacement by Ala or Leu in both N- and C-terminal regions as well as a central portion was performed to generate 42 single-site mutations. Amino acid replacement around a disulfide bond of Cys8-Cys119 caused a marked decrease in IgE-binding activity. Furthermore, a distinct decrease in IgE-binding was also caused by Ala-substitution close to a disulfide bond of Cys73-Cys78 and by mutations of a few charged residues. From these results, it was concluded that the two disulfide-forming regions of Der f 2 and several charged residues are important for forming major epitope structures recognized by human IgE antibodies.     

Crack Stability and Its Effect on Fracture Toughness of Hot-Pressed Silicon Nitride Beam Specimens

The effect of stable crack extension on fracture toughness test results was determined using single-edge precracked beam specimens. Crack growth stability was examined theoretically for bars loaded in three-point bending under displacement control. The calculations took into account the stiffness of both the specimen and the loading system. The results indicated that the stiffness of the testing system played a major role in crack growth stability. Accordingly, a test system and specimen dimensions were selected which would result in unstable or stable crack extension during the fracture toughness test, depending on the exact test conditions. Hot-pressed silicon nitride bend bars (NC132) were prepared with precracks of different lengths, resulting in specimens with different stiffnesses. The specimens with the shorter precracks and thus higher stiffness broke without stable crack extension, while those with longer cracks, and lower stiffness, broke after some stable crack extension. The fracture toughness values from the unstable tests were 10% higher than those from the stable tests. This difference, albeit small, is systematic and is not considered to be due to material or specimen-to-specimen variation. It is concluded that instability due to the stiffness of test system and specimen must be minimized to ensure some stable crack extension in a fracture toughness test of brittle materials in order to avoid inflated fracture toughness values.     

A comparison of the grade of laryngeal visualisation;--the McCoy compared with the Macintosh and the Miller blade in adults

Effectiveness in visualization of the vocal cord during orotracheal intubation with McCoy (McC) compared with Macintosh (Min) and Miller (Mil) blades were investigated. After an institutional review board approval, 117 patients for elective surgery under general anesthesia requiring tracheal intubation were investigated. Five board certified anesthesiologists tried to visualize the vocal cord of a patient three times with the three different types of laryngoscope. Total of 351 intubation attempts were studied. The view obtained at laryngoscopy with each of the three blades was recorded as follows. Grade 1. If most of the glottis is visible. Grade 2. If only the posterior extremity of the glottis is visible. Grade 3. If no part of the glottis can be seen. Grade 4. If not even the epiglottis can be exposed. Eight-two Grade 1 views were obtained with McC, 72 with Mil and 47 with Min, respectively. Thirty-three Grade 2 views were obtained with McC, 36 with Min and 24 with Mil. Two Grade 3 views with McC, 34 with Min and 14 with Mil were obtained. Seven Grade 4 views were obtained with Mil. The grades of laryngeal visualization with McC were significantly lower than those with Min and Mil.     

Deposition of carbon and its hydrogenation catalyzed by nickel

Formation of carbon on nickel sheet from benzene vapor carried by hydrogen was studied at a temperature range from 520 to 730°C. A maximum rate was observed at about 630°C, above which the deposition rate decreased rapidly. The carbon formed was hydrogenated in situ. Methane was the main gaseous product and a maximum rate was observed at about 670°C. Very high reactivity of deposited carbon toward hydrogenation was ascribed to the catalytic action of nickel particles dispersed in the carbon. The hydrogenation rates were divided into three zones and possible interpretations are discussed. A mechanism which is a reverse process to deposition was suggested. The decrease of the hydrogenation rate at higher temperatures was due to the equilibrium among carbon, hydrogen and methane, where carbon was more reactive than graphite.     

Semi-1 thermoplastic interpenetrating polymer networks of physically crosslinked poly(n-butyl acrylate) and polystyrene

Poly(n-butyl acrylate) (PnBA) chemically crosslinked with tetraethylene glycol dimethacrylate (TEGDM) and physically crosslinked PnBAs produced by neutralization of poly(n-butyl acrylate-stat-acrylic acid) with NaOH or Ca(OH)₂ were prepared as a polymer I network. Each polymer I was swollen with styrene and cured in situ into semi-IPN-TEGDM, semi-IPN-Na, or semi-IPN-Ca, respectively. Both physically crosslinked polymers maintained their shapes during the swelling procedure. Dynamic mechanical spectroscopy indicated that good mixing of the two polymers took place in the semi-IPN-Ca as well as in semi-IPN-TEGDM, but a distinct phase separation occurred in the semi-IPN-Na. These results were supported by their transparent or optical opaque appearances, respectively. Annealing at 180°C developed further phase separation in the semi-IPN-Na, but very little in the semi-IPN-Ca. Analyses by the incompatibility number (based on the modulus–temperature curve) and the calculation of individual phase compositions (from the glass transition temperature shifts) were used in estimating the extent of molecular mixing.     

Multiple responses analysis and modeling of Fenton process for treatment of high strength landfill leachate

Landfill leachate is one of the most recalcitrant wastes for biotreatment and can be considered a potential source of contamination to surface and groundwater ecosystems. In the present study, Fenton oxidation was employed for degradation of stabilized landfill leachate. Response surface methodology was applied to analyze, model and optimize the process parameters, i.e. pH and reaction time as well as the initial concentrations of hydrogen peroxide and ferrous ion. Analysis of variance showed that good coefficients of determination were obtained (R2 > 0.99), thus ensuring satisfactory agreement of the second-order regression model with the experimental data. The results indicated that, pH and its quadratic effects were the main factors influencing Fenton oxidation. Furthermore, antagonistic effects between pH and other variables were observed. The optimum H2O2 concentration, Fe(II) concentration, pH and reaction time were 0.033 mol/L, 0.011 mol/L, 3 and 145 min, respectively, with 58.3% COD, 79.0% color and 82.1% iron removals.     

Color image segmentation using adaptive unsupervised clustering approach

This paper presents the Region Splitting and Merging-Fuzzy C-means Hybrid Algorithm (RFHA), an adaptive unsupervised clustering approach for color image segmentation, which is important in image analysis and in understanding pattern recognition and computer vision field. Histogram thresholding technique is applied in the formation of all possible cells, used to split the image into multiple homogeneous regions. The merging technique is applied to merge perceptually close homogeneous regions and obtain better initialization for the Fuzzy C-means clustering approach. Experimental results have demonstrated that the proposed scheme could obtain promising segmentation results, with 12% average improvement in clustering quality and 63% reduction in classification error compared with other existing segmentation approaches.