Reliability and performance analysis of time – space – time switching networks with multiple separated space switches

Since electronic switching systems usually require very strict reliability requirements as well as good performance objectives, we need to jointly analyse the performance and reliability of switching systems. In this paper, we compare conventional time–space–time switches with single space switches with those with multiple separated space switches, from the viewpoints of reliability and performance. We consider time–space–time switching networks which consist of N incoming time switches, i.e. one NxN space switch, two (N/2)x(N/2) space switches, and four (N/4)x(N/4) space switches. We introduce a Markov reliability model to study the effect of failures and analyse the reliability and performance of three different types of switching networks in terms of average blocking probability and the mean time to unreliable operation, as we vary the offered traffic. As a result, T–S–T switching networks with multiple separated space switches exhibit better performance and reliability than those with single space switches.     

Influence of nitrate, ascorbic acid, and nitrate reductase microorganisms on N-nitrosamine formation during Korean-style soysauce fermentation.

Traditional Korean soysauce samples were collected from households in Chinju, Gyeongnam, Korea and analysed for volatile N-nitrosamines. Five of 24 samples contained NDMA (range = 1.6-10.4 micrograms/l) which was the only volatile N-nitroso compound found. Soysauce made from well water contained NDMA more often (4 of 6 samples) than soysauce made from tap water (1 of 18). This suggests that the water source is a determinate in the NDMA content of soysauce, probably due to a higher nitrate content of well water. The source of salt used did not clearly influence NDMA content. Soysauce was prepared in the laboratory using traditional methods but with 0 to 400 mg/l nitrate and in some cases made 6.5 to 65 mM in ascorbic acid and fermented for 120 days. The NDMA content of the samples was positively correlated with increasing nitrate concentration. Nitrate at 400 mg/l resulted in an NDMA content of 203 micrograms/l. Ascorbic acid substantially inhibited NDMA formation. All samples contained large numbers of nitrate reductase-containing organisms (greater than 1 x 10(7) CFU/ml).     

A linear minimum mean square error multiuser receiver inRayleigh-fading channels

We generalize the multiuser (CDMA spread spectrum) communication systems to the fading environments. We first extend Verdu's (1986) conventional optimum receiver to Rayleigh-fading environments and then evaluate its performance. Having no knowledge of the received power at the receiving end, we therefore need an estimator to efficiently estimate the received signal strength of each user in fading environments. A linear minimum mean square error (LMMSE) unbiased estimator is proposed to attain this goal. By using the minimum mean square error (MMSE) Bayesian estimation, we further propose the LMMSE bit estimator for efficient demodulation. Its performance is close to the optimum multiuser receiver but with a much simpler polynomial complexity. To further reduce the complexity, we extend the LMMSE estimator to the sequential LMMSE estimator. In sequential estimation, we do not need to implement the matched filter banks and to perform the matrix inversion when estimating. In addition, it converges after approximately 2k iterations, where k is the number of users. With this fast convergence property and the simple structure, the sequential LMMSE estimator provides an attractive alternative to the implementation of a multiuser system     

Hydrodynamic characteristics of a FCC regenerator

The hydrodynamic and gas mixing characteristics have been determined in a FCC regenerator (0.48 m I.D.x3.4 m high) with FCC particles. Solids holdup in the dense bed decreases with increasing gas velocity, but it increases in the freeboard region. The bubble/void fraction increases with an increase along the bed height at a given gas velocity and increases with increasing gas velocity at a constant bed height. Backmixed tracer gas at the wall region is higher than that at the center region of the bed. The gas backmixing coefficient decreases with increasing gas velocity.     

The effect of the aspect ratio on the hydrophobicity of microstructured polydimethylsiloxane (PDMS) robust surfaces

In this study, we have designed and fabricated robust hydrophobic surfaces that are composed of various micropillar arrays and investigated the effect of the aspect ratio (feature height/feature size) of the micropillar on the wettability of the fabricated surfaces. The robust, micropillar-arrayed surfaces were designed to yield the same Wenzel and Cassie water contact angles (CAs). According to our design rule, one can achieve an enhanced hydrophobic surface by increasing the height of the micropillars. The designed hydrophobic surfaces were fabricated by polydimethylsiloxane (PDMS) replica molding with photolithographically micropatterned SU-8 masters. The hydrophobicity properties of the fabricated PDMS surfaces were fully characterized theoretically and experimentally. From the theoretical and experimental results, it was found that the micropillars of an intrinsically hydrophobic material with a high aspect ratio enhance the hydrophobicity of the surface by increasing the surface roughness (in view of the Wenzel state) and the opportunities for the entrapment of air beneath a water droplet (the Cassie state).     

Development of a sequential robust–tolerance design model for a destructive quality characteristic

Robust design (RD) and tolerance design (TD) have received much attention from researchers and practitioners for more than two decades, and a number of methodologies for modeling and optimizing the RD and TD processes have been studied. However, there is ample room for improvement. Because most existing research considers RD and TD as separate research fields, the primary objective of this paper is to develop a sequential robust–tolerance design method to jointly determine the best factor settings and the closed-form solutions for the optimal specification limits. We then apply the proposed method to a destructive quality characteristic. Finally, a case study and sensitivity analyses are performed for verification purposes, and further studies are discussed.     

The election problem in asynchronous distributed systems with bounded faulty processes

Determining the “weakest” failure detectors is a central topic in solving many agreement problems such as Consensus, Non-Blocking Atomic Commit and Election in asynchronous distributed systems. So far, this has been studied extensively for several such fundamental problems. It is stated that Perfect Failure Detector P is the weakest failure detector to solve the Election problem with any number of faulty processes. In this paper, we introduce Modal failure detector M and show that to solve Election, M is the weakest failure detector to solve election when the number of faulty processes is less than ⌈n/2⌉. We also show that it is strictly weaker than P.

Effect of Hot Band Annealing on Magnetic Properties in 3% Si Grain‐oriented Electrical Steels

Hot band annealing is known to be a prerequisite for good magnetic properties irrespective of manufacturing methods in grain‐oriented Fe‐3 wt.% Si electrical steels. In this study, the effects of hot band annealing on magnetic properties were investigated in 3% grain‐oriented electrical steels of low soluble AI contents and one‐stage cold rolling. Microstructure and precipitate distribution were compared with hot band annealing conditions. Secondary recrystallization behaviour with hot band annealing condition was also discussed.     

Context Switching in a Run-Time Reconfigurable System

A distinguishing feature of reconfigurable computing over rapid prototyping is its ability to configure the computational fabric on-line while an application is running. Conventional reconfigurable computing platforms utilize commodity FPGAs, which typically have relatively long configuration times. Shrinking the configuration time down to the nanosecond region opens possibilities for rapid context switching and virtualizing the computational resources. An experimental context-switching FPGA, called the CSRC, has been created by BAE Systems, and gives researchers the opportunity to explore context-switching applications. This paper presents results obtained from constructing both control-driven and data-driven context switching applications on the CSRC device, along with unique properties of the run-time and compile-time environment.