Evolution and structure of drying material bridges of pharmaceutical excipients: studies on a microscope slide

An experimental procedure was developed to study directly the process by which liquid bridges between small particles in a granule form and solidify. The evolution of saturated solutions of such pharmaceutical excipients as lactose and mannitol in a liquid bridge was studied on a system situated on a microscope slide. Solidification and crystallization kinetics and phase composition during and immediately following bridge formation were observed directly. It was shown that bridges on the microscope slide and in the granule behave very much the same regardless of the different length and diffusion-scales of the two systems.We found that solid bridge formation takes place in several consecutive but distinct steps. In the case of lactose, considerable shrinkage of the initial liquid bridge takes place prior to the onset of crystallization. Further bridge solidification at ambient conditions occurs via simultaneous crystallization and vitrification within minutes. As a result, a “solid” bridge usually contains both a crystalline and a non-crystalline phase, the crystalline phase being predominately α-lactose monohydrate. Most of the non-crystalline phase eventually converts to crystalline β-lactose but the process may take many hours or even days. Results for this process are compared for samples obtained from different manufacturers of commercially available lactose. In the case of mannitol, different polymorphic forms crystallize as the drying/crystallization process progresses. A formed “solid” bridge usually contains several polymorphs of mannitol. The relevance of the behavior of the two model systems (pure lactose and pure mannitol) to a real granulation and tabletting process is discussed.     

Blood pressure estimation and beliefs among normotensives and hypertensives.

14 medicated hypertensive, 15 nonmedicated mild hypertensive, 39 normotensive, and 13 hypotensive adults participated in a 1–2 hr laboratory experiment that assessed each S's symptoms, moods, and estimates of systolic blood pressure (SBP) relative to actual SBP levels. Several self-reports and autonomic measures were collected during and after each of 22 tasks. Within-S correlations indicated that all Ss could estimate SBP at levels greater than chance. Further, 68% of the Ss evidenced at least 1 significant symptom–SBP correlation. Although medicated hypertensives believed they could estimate their BP more accurately than other groups, they were actually no more accurate than the other Ss. They also evidenced far fewer empirically derived symptom–SBP and emotion–SBP correlations than any other group. Overall, blood pressure (BP) beliefs were largely inaccurate. If these erroneous beliefs can be eliminated, Ss may be able to estimate BP fluctuations more accurately. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An explicit finite difference method for finite-time observers

In this paper we present a numerical method for estimating the current state of a nonlinear control system. We use finite differences to discretize a modified version of the finite-time observer equations in James. The discretized equations are simple and easily programmed. The convergence and accuracy of the scheme is proved, and the scheme enjoys a number of important properties: availability of rate of convergence estimates, good robustness characteristics, and the ability to handle certain types of discontinuities in the observations. The major disadvantage is that the number of grid points required increases exponentially with the number of state dimensions.     

ISDN: A Global Solution to Transmission Needs

The concept of the integrated services digital network (ISDN) could revolutionize information management. The purpose of the ISDN is to provide a worldwide network that offers end-to-end digital connectivity supporting a wide variety of communications services. ISDN subscribers will have direct access to a high-speed digital pipeline capable of supporting simultaneous voice, data, facsimile, and various other services and calling features.     

Shallow Linear Action Graphs and their Embeddings

Action calculi, which generalise process calculi such as Petri nets, π-calculusand ambient calculus, have been presented in terms of action graphs. We here offer linear action graphs as a primitive basis for action calculi. This paper presents the category of embeddings of undirected linear action graphs without nesting, using a novel form of graphical reasoning which simplifies some otherwise complex manipulations in regular algebra. The results are adapted in a few lines to directed graphs. This work is part of a long-term search for a uniform behavioural theory for process calculi. Received October 2000 / Accepted in revised form April 2001     

Effect of moderate to very low fat defined formula diets on serum lipids in healthy subjects

Serum total cholesterol, high density lipoprotein (HDL) cholesterol, and triglyceride levels were studied in healthy male and female subjects consuming for one-week periods a diet of conventional food (CF) providing 42% of energy as fat, principally butter fat, and then in random order nutritionally complete, defined formula diets of moderate (32%) to very low (1%) fat content. Compared to CF, the formula with 32% of energy as corn oil lowered serum cholesterol by 25% and the ratio of total to HDL-cholesterol by 13%. Low (9%) and very low (1–3%) fat formulas reduced HDL-cholesterol by as much as 40%, raised the total: HDL-cholesterol ratio by about 20% and raised serum triglyceride levels by as much as 100%. When low and very low fat formulas were ingested for three weeks, these effects persisted although maximal responses occurred during the first week. These results demonstrated that a moderate fat formula diet with a high P/S ratio had a more favorable effect on serum lipid levels than various low fat formulas. Low fat conventional food diets should be studied in long-term controlled metabolic experiments before such diets are recommended to the general population for coronary heart disease or cancer prevention.     

Advances in the stabilization of flexible PVC by using a liquid calcium‐zinc technology

The global market for liquid mixed‐metal stabilizers is migrating toward heavy‐metal‐free products, Historically, these systems have not been performance and cost competitive. High efficiency calcium‐zinc stabilizers have the potential to replace heavy‐metal‐based products. The intrinsic value of non‐phenolic lubricating calcium intermediates and calcium‐zinc stabilizers is discussed.     

AN ASSESSMENT OF CRACK CLOSURE AND THE EXTENT OF THE SHORT CRACK REGIME IN Q1N (HY80) STEEL

Abstract— The paper addresses some aspects of the differences in fatigue crack growth rate behaviour and threshold values obtained for long through-cracks, short through-cracks and surface cracks. Attention is focused on plasticity induced closure in the wake behind the growing crack tip. For long cracks at high K _max, closure is found to depend in a linear manner on K _max, i.e. K _op, increases with the size of the monotonic plastic zone. Closure increases at low δ K and this is primarily a consequence of the load shedding procedure. If short through-cracks are prepared by machining specimens containing long cracks, a substantial part of the plastic wake is removed and this can produce marked effects on the closure contribution during subsequent growth. The length of crack "closed" in a long crack threshold test was found to be of the order of 1 mm. Cracks less than this length exhibited "short crack" behaviour: greater than this length, they behaved as "long cracks", with plastic wake effects apparently fully operative. Small surface cracks exhibit "long crack" behaviour at lengths as short as 0.2 mm and reasons for this are discussed.     

Integration framework for intelligent manufacturing processes

In this article, we describe a new approach to applying distributed artificial intelligence techniques to manufacturing processes. The construction of intelligent systems is one of the most important techniques among artificial intelligence research. Our goal is to develop an integrated intelligent system for real time manufacturing processes. An integrated intelligent system is a large knowledge integration environment that consists of several symbolic reasoning systems (expert systems) and numerical computation packages. These software programs are controlled by a meta-system which manages the selection, operation and communication of these programs. A meta-system can be implemented in different language environments and applied to many disciplines. This new architecture can serve as a universal configuration to develop high performance intelligent systems for many complicated industrial applications in real world domains.To whom all correspondence should be addressed.