Microstructure and Mechanical Properties of the Ductile Al–Ti–Mo–Nb–V Refractory High Entropy Alloys

Metallurgical and Materials Transactions A - A number of non-equimolar refractory high entropy alloys (RF HEAs) from the Al–Ti–Mo–Nb–V system are synthesized, with the...     

Development and analysis of a tool for speed up of EnergyPlus through parallelization

This paper describes how the EPparallel tool splits a single annual simulation into 12 simulations of one month each and runs them in parallel. The paper also describes the methodology to prepare input files, enable file sharing between nodes, collate results generated by the nodes, and ensure quality check on the simulations. The EPparallel tool uses Message Passing Interface library and runs on Linux. The tool has been tested on 16 commercial reference buildings over 16 US weather files. The results of these 256 runs which include the run times, computing time overheads, speed gains and accuracy of results are presented in this paper. The speed gain ranged from 2.9×to 7.8×and deviation (percentage of output values obtained in parallel simulation which were off by more than 1% as compared to output values obtained in annual simulation) ranged from 0% to 4%.     

移动平台后起的领跑者 走进Tegra 2的世界

Tegra（图睿）是NVIDIA针对移动平台推出的处理器,专为便携式、高分辨率、性能强劲的便携、移动互联设备而设计。实际上,它是一块基于ARM架构的SoC（System on Chip,片上系统）心H片（NVIDIA称之为Computer-on-a-chip）,既集成了ARM的CPU,又包含了NVIDIA的GPU;既具有通用处理能力,又有十分出众的图形性能,而功耗却低得令人难以相信。     

Removal of cadmium (II) from aqueous solutions by adsorption on agricultural waste biomass

This paper reports the feasibility of using various agricultural residues viz. sugarcane bagasse (SCB), maize corncob (MCC) and Jatropha oil cake (JOC) for the removal of Cd(II) from aqueous solution under different experimental conditions. Effect of various process parameters, viz., initial metal ion concentration, pH, and adsorbent dose has been studied for the removal of cadmium. Batch experiments were carried out at various pH (2-7), adsorbent dose (250-2000 mg), Cd(II) concentration (5-500 mg l(-1)) for a contact time of 60 min. The maximum cadmium removal capacity was shown by JOC (99.5%). The applicability of Langmuir and Freundlich isotherm suggests the formation of monolayer of Cd(II) ions onto the outer surface of the adsorbents. Maximum metal removal was observed at pH 6.0 with a contact time of 60 min at stirring speed of 250 rpm with an adsorbent dose of 20 g l(-1) of the test solution. The maximum adsorption of cadmium (II) metal ions was observed at pH 6 for all the adsorbents viz; 99.5%, 99% and 85% for JOC, MCC, and SCB, respectively. Order of Cd(II) removal by various biosorbents was JOC>MCC>SCB. JOC may be an alternative biosorbent for the removal of Cd(II) ions from the aqueous solution. FT-IR spectra of the adsorbents (before use and after exhaustion) were recorded to explore number and position of the functional groups available for the binding of Cd(II) ions on to studied adsorbents. These results can be helpful in designing a batch mode system for the removal of cadmium from dilute wastewaters.