铝表面改性SiOx薄膜力学性能研究

采用常压化学气相沉积(APCVD)技术在铝基底上成功制备了改性SiOx陶瓷薄膜.通过显微硬度测试与涂层附着力自动划痕测试定量研究了薄膜显微硬度和膜基结合强度,利用光学显微镜(OM)和扫描电子显微镜(SEM)观察了薄膜的原始表面以及压痕、划痕形貌.结果表明,SiOx膜层由大小不均匀的等轴状颗粒团聚堆垛而成,退火处理时长大或融合成片状;SiOx薄膜有效提高纯铝表面的硬度,并能通过SiOx薄膜变形以松弛表层应力,抑制脆性裂纹产生;划痕测试证明基底和薄膜具有很高的结合强度,薄膜与基底发生塑性变形而不剥离.     

铝表面改性SiOx薄膜力学性能研究

采用常压化学气相沉积（APCVD）技术在铝基底上成功制备了改性SiOx陶瓷薄膜。通过显微硬度测试与涂层附着力自动划痕测试定量研究了薄膜显微硬度和膜基结合强度，利用光学显微镜（0M）和扫描电子显微镜（SEM）观察了薄膜的原始表面以及压痕、划痕形貌。结果表明，SiOx膜层由大小不均匀的等轴状颗粒团聚堆垛而成，退火处理时长大或融合成片状；SiOx薄膜有效提高纯铝表面的硬度，并能通过SiOx薄膜变形以松弛表层应力，抑制脆性裂纹产生；划痕测试证明基底和薄膜具有很高的结合强度，薄膜与基底发生塑性变形而不剥离。     

Rectification of legibility distance in a driving simulator

Visual differences lead to differences in the legibility distances of traffic signs between driving simulators and real road environments. To ensure that the legibility distance in a simulator is similar to that in the real world, this study proposes a theoretical equation for predicting legibility distance and a simple algorithm for determining the magnifying power of a traffic sign for a display system in a simulator. Experiments of traffic sign recognition using a simulator were conducted under quasi-static and dynamic driving conditions. On-road tests were also carried out under quasi-static and dynamic driving conditions. Thirty healthy and non-disabled volunteers were recruited. The experimental results showed that the proposed theoretical equation for predicting legibility distance and the simple algorithm for determining the magnifying power of traffic signs reduced the difference in legibility distances between the simulator and real road environment under quasi-static and dynamic driving conditions.     

Eigenvalue Modeling and Cross-Correlation Analysisfor 6.0-6.4 GHz MIMO Channel

In Multiple-Input Multiple-Output （MIMO） system, the number of positive channel matrix eigenvalues ~s directly related to system performance. In order to characterize and model channel matrix eigenvalues, channel measurements at 6. 0 -6. 4GHz by using 4 ~ 4 MIMO structure were conducted in a typical classroom environment. Based on measured data, the eigenvalues were modeled as Log-Normal distributed random variables and parameterized. Furthermore, Cross-Correlation （CC） coefficients of eigenvalues were estimated. The measurement results show that, under both Light-Of-Sight （LOS） and Non- Light-Of-Sight （NLOS） scenarios, eigenvalues are highly de-correlatod so that CC can be ignored for eigenvalue model.     

35克素牛排单片重量控制方案探究

目的探究制定公司畅销产品大豆蛋白类食品35克素牛排的重量控制方案。方法研发人员通过查阅相关资料、采集生产与管理人员的意见、跟踪生产全程等手段获取实验方向,并通过小实验改变工艺条件和生产试验进一步验证工艺条件,探寻出了35克素牛排在生产过程中的重量变化规律、重量不稳定的主要原因及改进措施。结果 35克素牛排的单片重量与产品卤制工序呈影响极显著,与原材料重量、油炸工序差异显著。结论原材料控制在11克以上,油炸时间2分钟,最佳卤制时间10分钟,产品的单片重量合格率提高到90%以上。     

无线传感器网络中基于数据融合的移动代理曲线动态路由算法研究

和传统的C/S模型相比,移动代理模型在数据融合方面更适合无线传感器网络.在基于移动代理的数据融合算法中,移动代理访问传感节点的顺序以及总数对算法的效率、网络寿命等有着重大影响.为此提出了一种基于数据融合的移动代理曲线动态路由算法设计方案.通过构造特定数据结构的数据报文和数据表,给出了目标节点基本信息收集算法获取目标节点到处理节点的最优路径;将移动代理路由归结为一个优化问题,由静态路由算法求出移动代理迁移的静态最优路由节点序列,进而获得了移动代理基于曲线的动态路由算法.理论分析和模拟实验表明,随着传感器网络规模的增大和传感数据量的增加,和其它算法相比,该算法有更小的网络耗能和延时.     

The influence of pearlite fraction on fracture toughness and fatigue crack growth in nodular cast iron

Fracture toughness and fatigue crack growth data of four nodular cast irons with different pearlite fractions are studied. The influence of temperature on fracture toughness is also investigated. Fracture surfaces are observed using a scanning electron microscope to correlate fracture toughness with the fracture surface and to understand the mechanism of crack growth at different stress intensity factor ranges. It is shown that the upper shelf fracture toughness increases with pearlite fraction. The existence of nodular void regions on the fracture surface plays an important role in fracture toughness. The fatigue crack growth rate is less sensible to stress intensity factor range when pearlite fraction increases.     

Fracture toughness behaviour in AISI 4130 steel of electron beam welding

This investigation was undertaken to evaluate if fracture toughness and weld porosity could be improved to satisfied characteristics using various welding speeds and electron beam oscillation patterns. Porosity increases in general as welding speed increases. Correlations have been found between fracture toughness and weld porosity. The fracture toughness improved with reducing a large amount of weld porosity, due to proper beam deflection patterns. One of the interesting results indicated that the existence of a little base porosity could absorb more energy due to local plastic deformation and this fact could explain the increasing of fracture toughness at those situations.     

Impact fatigue of a polycarbonate/acrylonitrile-butadiene-styrene blend

This study analyzes the impact properties of a polycarbonate/acrylanitrile-butadiene-styrene (PC/ABS) blend. The specimens were prepared under various injection molding conditions, including filling time, melting temperature, and mold temperature. Impact tests were performed with a Dynatup drop weight impact tester at different impact energies (10, 15, 20, 25 J). The fracture mechanism was examined with a scanning electron microscopy. The results indicated that the load-time history of the PC/ABS blend has approximately a sinusoidal form in impact. The best injection molding conditions are a filling time of 12 s, a melting temperature of 260°C and a mold temperature of 80°C. In this case, the specimen shows the highest energy absorbed in single impact, together with the highest impact number in impact fatigue. The impact number and the accumulation energy seem to follow an exponential curve as the impact energy decreases. The PC/ABS blend material clearly exhibited ductile fracture with a continuous reduction in strength by viscoplastic deformation. The higher the impact number, the higher the accumulation energy. The accumulation energy of impact fatigue with impact energy 10 J is about 35–45 times greater than the energy absorbed in single impact. Tearing, shear fracture, and plastic deformation are the major fracture mechanisms of the PC/ABS blend matrix in single impact and repeated impact conditions.     

Abrasive wear property of bainitic nodular cast iron in laser processing

The effects of the different austenitizing and isothermal transformation temperature and time on the wear resistance in bainitic ductile iron has been investigated and compared with surface hardening by laser processing, to find the best wear resistance for the bainitic ductile iron. It was found that the wear resistance of the lower bainitic ductile iron was better than upper bainitic ductile iron, and that the factor affecting hardness and wear properties the most was the isothermal transformation temperature. After surface hardening by laser processing, the hardening reached RC 55 or more, no evidence of any difference between the lower and the upper bainitic ductile iron being found.